• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.3
• /
• pp.151-161
• /
• 2014

3GPP LTE-Advanced (Release 10) system specifies carrier aggregation (CA) to enable high data rate on using multiple frequency bands, including the variout CA-specific deployment scenarios. Considering one of those scenarios in which the different directional sector antenna is employed by each frequency band, we propose a per-carrier cell selection scheme that can improve the average throughput of the cell-edge users by allowing each user equipment (UE) to select the frequency band of the adjacent cell. Furthermore, a distributed algorithm for inter-cell copperative scheduling in this scheme is proposed to support proportional fairness among the cells. It has been shown that the proposed scheduling algorithm for the per-carrier cell selection scheme improves the cell-edge user throughput roughly by 50% over that of the conventional scheme.

• ETRI Journal
• /
• v.42 no.5
• /
• pp.773-780
• /
• 2020

A 40 nm complementary metal oxide semiconductor carrier-aggregated drive amplifier with high linearity is presented for sub-GHz Internet of Things applications. The proposed drive amplifier consists of two high linear amplifiers, which are composed of five differential cascode cells. Carrier aggregation can be achieved by switching on both the driver amplifiers simultaneously and combining the two independent signals in the current mode. The common gate bias of the cascode cells is selected to maximize the output 1 dB compression point (P1dB) to support high-linear wideband applications, and is used for the local supply voltage of digital circuitry for gain control. The proposed circuit achieved an output P1dB of 10.7 dBm with over 22.8 dBm of output 3rd-order intercept point up to 0.9 GHz and demonstrated a 55 dBc adjacent channel leakage ratio (ACLR) for the 802.11af with -5 dBm channel power. To the best of our knowledge, this is the first demonstration of the wideband carrier-aggregated drive amplifier that achieves the highest ACLR performance.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.759-762
• /
• 2012

Carrier aggregation is an essential feature in the Long Term Evolution-Advanced (LTE-A) system, which allows the scalable expansion of the effective bandwidth to be delivered to user equipment (UE) through the concurrent use of radio resources across multiple component carriers (CCs). This system's optimal radio-resource use has received much attention under simultaneous access (SA) scenarios for multiple CCs (m-CCs). This letter establishes how many CCs a UE should simultaneously connect to maintain maximum uplink capacity. Under the m-CC LTE-A system, the spectral efficiency of the m-CC SA scheme ($m{\geq}2$) is compared with that of CC selection (CCS). Numerical results reveal that the 2-CC SA scheme outperforms CCS and performs almost equally to the m-CC SA scheme ($m{\geq}3$).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.4799-4818
• /
• 2015

In this paper, we investigate the problem of achieving global optimization for distributed carrier aggregation (CA) in small cell networks, using a game theoretic solution. To cope with the local interference and the distinct cost of intra-band and inter-band CA, we propose a non-cooperation game which is proved as an exact potential game. Furthermore, we propose a spatial adaptive play learning algorithm with heterogeneous learning parameters to converge towards NE of the game. In this algorithm, heterogeneous learning parameters are introduced to accelerate the convergence speed. It is shown that with the proposed game-theoretic approach, global optimization is achieved with local information exchange. Simulation results validate the effectivity of the proposed game-theoretic CA approach.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.2233-2252
• /
• 2018

For the problem of cross-layer joint resource allocation (JRA) in the Long-Term Evolution (LTE)-Advanced standard using carrier aggregation (CA) technology, it is difficult to obtain the optimal resource allocation scheme. This paper proposes a joint resource allocation algorithm based on the weights of user's average quality of experience (JRA-WQOE). In contrast to prevalent algorithms, the proposed method can satisfy the carrier aggregation abilities of different users and consider user fairness. An optimization model is established by considering the user quality of experience (QoE) with the aim of maximizing the total user rate. In this model, user QoE is quantified by the mean opinion score (MOS) model, where the average MOS value of users is defined as the weight factor of the optimization model. The JRA-WQOE algorithm consists of the iteration of two algorithms, a component carrier (CC) and resource block (RB) allocation algorithm called DABC-CCRBA and a subgradient power allocation algorithm called SPA. The former is used to dynamically allocate CC and RB for users with different carrier aggregation capacities, and the latter, which is based on the Lagrangian dual method, is used to optimize the power allocation process. Simulation results showed that the proposed JRA-WQOE algorithm has low computational complexity and fast convergence. Compared with existing algorithms, it affords obvious advantages such as improving the average throughput and fairness to users. With varying numbers of users and signal-to-noise ratios (SNRs), the proposed algorithm achieved higher average QoE values than prevalent algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.9
• /
• pp.497-507
• /
• 2014

This paper investigates the standard features of Carrier aggregation (CA), the related UE RF requirements in 3GPP release 12 and estimated CA evolution in future. The main CA feature of 3GPP release 12 in WG4 perspectives includes 2Uplink(UL) CA, 3Downlink(DL) CA and TDD-FDD CA. To support these features in UE, UE-to-UE coexistence problem and RF requirements generated by unwanted emissions such as inter-modulation and harmonics are analyzed. Also, future CA technology such as LTE in unlicensed bands is described.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.4
• /
• pp.206-208
• /
• 2014

In this letter, IQ mismatch of a CA-supporting terminal for LTE-A is analyzed and each of the analog blocks is modeled mathematically. Based on the model, a new digital calibration algorithm is proposed and verified using simulation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1647-1658
• /
• 2011

This paper suggests the methods to improve the wireless backhaul link of the Relay FDD mode that 3GPP LTE-Advanced supports. New RRC message and Relay startsup procedure are introduced to apply Carrier Aggregation in the Relay wireless backhaul. Also, we design new reference signal that makes Type 1 Relay operated in full-duplexing, expecting to maximize the radio resource utilization. And, we propose the efficient configuration for the periodic uplink control information under the backhaul subframe allocation method in LTE-Advanced Relay. Hereafter, the standard activities in the 3GPP RAN is supposed to focus on the improvement of the LTE-Advanced features. Therefore, the suggestions in this paper are expected to be actively discussed in the LTE-Advanced future releases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.861-869
• /
• 2014

This paper shows the research of a platform architecture relates to the LTE-based macro basestation; the proposed platform architecture is designed with the interface between the baseband signal and IF (Intermediate Frequency) per codeword. Using this method, we can smoothly transmit/receive a large amounts of data regardless of the number of antenna in a macro base station which is used technology such as massive MIMO. In this paper, We analyzed the evolution of LTE technology and the trend in the development of the LTE-based system. For validation of the proposed architecture, we compare the general architecture of a conventional with the proposed architecture. From the calculation results of transmission quantity data, we see that the proposed architecture can give better performance than the existing architecture. By presenting this architecture, we hope to provide a new foundation for Design and Implementation of a LTE base station platform which is used technology such as massive MIMO, carrier aggregation (CA), coordinated multi point (CoMP).

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.917-924
• /
• 2019

This paper presents a wideband low noise amplifier (LNA) that is suitable for LTE-Advanced and 5G communication standards employing carrier aggregation (CA). The proposed LNA encompasses a common input stage and a dual output second stage with a buffer at each distinct output. This architecture is targeted to operate in both intra-band (contiguous and non-contiguous) and inter-band CA. In the proposed design, the input and second stages employ a gm enhancement with resistive feedback technique to achieve self-biasing, enhanced gain, wide bandwidth as well as reduced noise figure of the proposed LNA. An up/down power controller controls the single input single out (SISO) and single input multiple outputs (SIMO) modes of operation for inter-band and intra-band operations. The proposed LNA is designed with a 45nm CMOS technology. For SISO mode of operation, the LNA operates from 0.52GHz to 4.29GHz with a maximum power gain of 17.77dB, 2.88dB minimum noise figure and input (output) matching performance better than -10dB. For SIMO mode of operation, the proposed LNA operates from 0.52GHz to 4.44GHz with a maximum voltage gain of 18.30dB, a minimum noise figure of 2.82dB with equally good matching performance. An $IIP_3$ value of -6.7dBm is achieved in both SISO and SIMO operations. with a maximum current of 42mA consumed (LNA+buffer in SIMO operation) from a 1.2V supply.