• Title/Summary/Keyword: Carrier Control

Search Result 845, Processing Time 0.027 seconds

Throughput Analysis of Multi-Carrier DS-CDMA System in Rayleigh Fading Channels (레일리 페이딩 채널에서 Multi-Carrier DS-CDMA 시스템의 Throughput 해석)

  • 김영철;노재성;강희조;조성준
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.5 no.6
    • /
    • pp.1066-1072
    • /
    • 2001
  • ALOHA Multi-Carrier DS-CDMA systems in the multipath Rayleigh fading channel. The throughput of two systems are compared according to the length of a packet in the fast Rayleigh and the slow Rayleigh multipath fading. As a result, we have known that Multi-Carrier DS-CDMA system has less capacity than wideband DS-CDMA system in the same bandwidth, but throughput of Multi-Carrier DS-CDMA system is higher than that of wideband DS-CDMA system. And in Multi-Carrier DS-CDMA systems, higher throughput can be obtained through shortening the length of packet in the fast Rayleigh fading, and it is efficient to control the length of a packet adequately or increase the system capacity of Multi-Carrier DS-CDMA system in the slow Rayleigh fading.

  • PDF

Carrier Phase Based Navigation Algorithm Design Using Carrier Phase Statistics in the Weak Signal Environment

  • Park, Sul Gee;Cho, Deuk Jae;Park, Chansik
    • Journal of Positioning, Navigation, and Timing
    • /
    • v.1 no.1
    • /
    • pp.7-14
    • /
    • 2012
  • Due to inaccurate safe navigation estimates, maritime accidents have been occurring consistently. In order to solve this, the precise positioning technology using carrier phase information is used, but due to high buildings near inland waterways or inclination, satellite signals might become weak or blocked for some time. Under this weak signal environment for some time, the GPS raw measurements become less accurate so that it is difficult to search and maintain the integer ambiguity of carrier phase. In this paper, a method to generate code and carrier phase measurements under this environment and maintain resilient navigation is proposed. In the weak signal environment, the position of the receiver is estimated using an inertial sensor, and with this information, the distance between the satellite and the receiver is calculated to generate code measurements using IGS product and model. And, the carrier phase measurements are generated based on the statistics for generating fractional phase. In order to verify the performance of the proposed method, the proposed method was compared for a fixed blocked time. It was confirmed that in case of a weak or blocked satellite signals for 1 to 5 minutes, the proposed method showed more improved results than the inertial navigation only, maintaining stable positioning accuracy within 1 m.

Biological Treatment of Nutrients and Heavy Metals in Synthetic Wastewater Using a Carrier Attached to Rhodobacter blasticus

  • Kim, Deok-Won;Park, Ji-Su;Oh, Eun-Ji;Yoo, Jin;Kim, Deok-Hyeon;Chung, Keun-Yook
    • Applied Chemistry for Engineering
    • /
    • v.33 no.6
    • /
    • pp.666-674
    • /
    • 2022
  • The removal efficiencies of nutrients (N and P) and heavy metals (Cu and Ni) by Rhodobacter blasticus and R. blasticus attached to polysulfone carriers, alginate carriers, PVA carriers, and PVA + zeolite carriers in synthetic wastewater were compared. In the comparison of the nutrient removal efficiency based on varying concentrations (100, 200, 500, and 1000 mg/L), R. blasticus + polysulfone carrier treatment showed removal efficiencies of 98.9~99.84% for N and 96.92~99.21% for P. The R. blasticus + alginate carrier treatment showed removal efficiencies of 88.04~97.1% for N and 90.33~97.13% for P. The R. blasticus + PVA carrier treatment showed removal efficiencies of 18.53~44.25% for N and 14.93~43.63% for P. The R. blasticus + PVA + zeolite carrier treatment showed removal efficiencies of 26.65~64.33% for N and 23.44~64.05% for P. In addition, at the minimum inhibitory concentration of heavy metals, R. blasticus (dead cells) + polysulfone carrier treatment showed removal efficiencies of 7.77% for Cu and 12.19% for Ni. Rhodobacter blasticus (dead cells) + alginate carrier treatment showed removal efficiencies of 25.83% for Cu and 31.12% for Ni.

Parallel Control of Mini Ice Storage Air Conditioner Using LonWorks System (LonWorks 시스템을 이용한 소형빙축열 에어컨의 병렬 제어)

  • Kim, Hong-Ryeol;Cho, Sung-Kyu;Chung, Nam-Jong;Kim, Dae-Won
    • Proceedings of the KIEE Conference
    • /
    • 2003.07d
    • /
    • pp.2358-2361
    • /
    • 2003
  • In this paper, parallel control method that enables coordinating operations of multiple mini ice storage air conditioner is proposed based on LonWorks system. The proposed parallel control method is a kind of master/slave control method based on LonTalk network communication. In the control method, master controller leading whole system operations is determined by date to avoid the disproportion of outdoor unit operations. In addition to the above, duty shift control method is proposed to avoid redundant operations of outdoor units and to equalize the operation frequencies of them. Through some simulation tests, the proposed parallel control method and the duty shift control method are evaluated and the efficiencies of them are validated by comparing with existing methods.

  • PDF

Dynamic Carrier Sensing Threshold Scheme based on SINR for Throughput Improvement in MANET (MANET에서 처리율 향상을 위한 SINR 기반 동적 캐리어 감지 임계값 방법)

  • Lee, Hyun-No;Kim, Dong-Hoi
    • Journal of Digital Contents Society
    • /
    • v.15 no.3
    • /
    • pp.319-326
    • /
    • 2014
  • IEEE 802.11 WLAN uses CSMA/CA(Carrier Sense Multiple Access/Collision Avoidance) method in MAC(Media Access Control) protocol, and through the carrier sense checks whether other users use the channel during the data transmission to avoid the data collision. Currently, IEEE 802.11 standard recommends the use of a fixed threshold which gives an impact on carrier sensing range. However, the existing scheme using the fixed threshold causes the operation of network to be inefficiency owing to the mobility in MANET(Mobile Ad hoc NETwork). In this paper, we found the better network throughput to be obtained by applying the proposed scheme, which chooses properly the carrier sensing threshold and transmission rate considering SINR(Signal to Interference-plus-Noise Ratio), to the MANET.

Throughput Analysis of Multi-Carrier DS-CDMA System in Rayleigh Fading Channels (레일리 페이딩 채널에서 Multi-Carrier DS-CDMA 시스템의 Throughput 해석)

  • 김영철;노재성;강희조;조성준
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2001.10a
    • /
    • pp.675-679
    • /
    • 2001
  • In this paper, throughput is derived for slotted ALOHA wideband DS-CDMA and slotted ALOHA Multi-Carrier DS-CDMA systems in the multipath Rayleigh fading channel. The throughput of two systems are compared according to the length of a packet in the fast Rayleigh and the slow Rayleigh multipath fading. As a result, we have known that Multi-Carrier DS-CDMA system has less capacity than wideband DS-CDMA system in the same bandwidth, but throughput of Multi-Carrier DS-CDMA system is higher than that of wideband DS-CDMA system. And in Multi-Carrier DS-CDMA systems, higher throughput can be obtained through shortening the length of packet in the fast Rayleigh fading and it is efficient to control the length of a packet adequately or increase the system capacity of Multi-Carrier DS-CDMA system in the slow Rayleigh fading.

  • PDF

An Impact Position Control of the Ink Droplet of Inkjet Printer

  • Cho, Young-Wan
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2005.06a
    • /
    • pp.2509-2512
    • /
    • 2005
  • In this paper, a position control scheme of the ink droplet is presented for the high image quality and print speed inkjet printer. The proposed scheme estimates the impact position and compensates it by control of the fire strobe time based on the dynamic equations describing the moving trajectory of the ink droplet. Compared to the conventional fire strobe control which is based on the simple synchronization the fire strobe with the position signal of the inkjet nozzle, the proposed control scheme provides more accurate impact position control during the carrier is moving with accelerated or decelerated speed as well as constant speed. The availability of printing during the acceleration and deceleration states of the carrier moving enables the print speed up and the frame size down which means the cost down.

  • PDF

Vehicle Platooning via Sensor Fusion of GPS Carrier Phase and Millimeter-Wave Radar

  • Woo, Myung-Jin;Park, Jae-Weon
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2001.10a
    • /
    • pp.23.5-23
    • /
    • 2001
  • This paper is concerned with the vehicle platooning in the AHS (Automated Highway Systems). For this, a relative navigation system is developed for the vehicles operating as a platoon. The relative navigation system is based on two sensors including GPS and MMWR (Millimeter-Wave Radar) and the federated Kalman Iter processing measurements of them. The architecture of this system requires GPS measurements of a preceding vehicle via communication link. Even if GPS measurements are available, they contain errors which are unacceptably high in vehicle platooning. Therefore, GPS carrier phase is considered. Integer ambiguities of GPS carrier phase measurements are determined by using MMWR ...

  • PDF

Inter-carrier Interference Reduction Scheme for SFBC-OFDM Systems

  • Kim, Kyung-Hwa;Seo, Bangwon
    • ETRI Journal
    • /
    • v.36 no.5
    • /
    • pp.783-790
    • /
    • 2014
  • In this paper, we first analyze carrier-to-interference ratio performance of the space-frequency block coded orthogonal frequency-division multiplexing (SFBC-OFDM) system in the presence of phase noise (PHN) and residual carrier frequency offset (RCFO). From the analysis, we observe that conventional SFBC-OFDM systems suffer severely in the presence of PHN and RCFO. Therefore, we propose a new inter-carrier interference (ICI) self-cancellation method - namely, ISC - for SFBC-OFDM systems to reduce the ICI caused by PHN and RCFO. Through the simulation results, we show that the proposed scheme compensates the ICI caused by PHN and RCFO in Alamouti SFBC-OFDM systems and has a better performance than conventional schemes.

A Unified Carrier Based PWM Method In Multilevel Inverters

  • Nho Nguyen Van;Youn Myung Joong
    • Journal of Power Electronics
    • /
    • v.5 no.2
    • /
    • pp.142-150
    • /
    • 2005
  • This paper presents a systematic approach to study the carrier based pulse width modulation (PWM) techniques applied to diode-clamped and cascade multilevel inverters by using multi-modulating patterns. This method is based on the description of controllable redundant parameters in the modulating signals. A unified mathematical formulation is presented for carrier based PWM methods, which obtains outputs similar to the corresponding space vector PWM. A full and separate control of the fundamental voltage, vector redundancies and phase redundancies can be obtained in the carrier based PWM. In this paper, the proposed PWM method and corresponding algorithm for generating multi-modulating signals will be formulated and demonstrated by our simulations.