• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.460-471
• /
• 2011

A port has been regarded as a significant contributor to air pollution in the surrounding areas. Port-related air pollutants are released from not only marine vessels, but also various land-side sources at ports, which include cargo handling equipment, vehicles, locomotives, and fugitive dust sources by port activities such as bulk handling and vehicle movements. However, most studies in Korea have only focused on vessel emissions and there is a lack of information on the emissions from other sources at port. In this study, in order to establish the port-related emission inventory and evaluate the relative contribution of these sources to air emissions from the Port of Incheon, the emissions from land-side sources were estimated and the CAPSS (Clean Air Policy Support System) data for vessel emissions were used. In particular, the detailed information and activity data for the cargo handling equipment source were collected and the emission factors and emissions by equipment types were calculated using U.S. EPA methodologies. Total HC, CO, $NO_x$, $PM_{10}$, and $SO_2$ emissions from port-related sources including the vessel in 2007 were calculated as 229 ton/year, 638 ton/year, 4,861 ton/year, 307 ton/year, and 3,995 ton/year, respectively. It was found that the vessel was the largest contributor to air pollutant emissions from the port, the cargo handling equipment was responsible for about from 8% to 13% of HC, CO, and $NO_x$ emissions and the resuspended road dust contributed about 39% for $PM_{10}$ emissions. The results of this study will be used to establish the management and reduction strategies of air pollution in the port.

• Journal of Korea Port Economic Association
• /
• v.31 no.4
• /
• pp.133-150
• /
• 2015

This study estimates greenhouse and noxious gas emissions caused by cargo-handling equipment at the Port of Incheon in 2013 by applying the NONROAD Model (U.S. EPA). The port emitted 838.4 tons of NOx and 82,747 tons of CO2. The estimates are 2.4 times higher for NOx and 1.3 times higher for CO2 than those of the Port of Los Angeles. Emissions from general cargo-handling equipment are five times more than those from container cargo-handling equipment. Among the three ports comprising the Port of Incheon, the emissions at the North Port, which handles raw materials for industry are relatively higher than those at the other ports. Compared to the study conducted by Chang et al. (2013, 2014), this study finds that CO2 and NOx emissions per cargo-handling equipment are 10 times higher than the corresponding amounts per ship.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.1
• /
• pp.39-47
• /
• 2015

The emissions of ozone precursors, NOx and VOCs from a biogenic source and port-related sources (ship, shipping container truck, and cargo handling equipment) were estimated in Busan during 2013. Total biogenic isoprene emission in Busan during 2013 was estimated to be $4,434ton\;yr^{-1}$ with the highest emission (e.g., $28ton\;day^{-1}$) in summer using a BEIS method. Seasonal ozone production rates by isoprene ranged from 0.15 (winter) to 2.08 (summer) $ppb\;hr^{-1}$, contributing the predominant portion to ambient ozone levels. Total emissions of NOx and VOCs from ship traversing Busan ports were estimated to be 29,537 and $814ton\;yr^{-1}$, respectively, showing the significant contribution to total NOx emission in Busan. The emissions of ozone precursors were significantly different depending on ship tonnage and port location. Compared to the ship emission, the emissions of NOx and VOCs from the shipping container trucks in Busan were insignificant (2.9% for NOx and 3.9% for VOCs). Total NOx and VOCs emissions from the cargo handling equipment were estimated to be 1,440 and $133ton\;yr^{-1}$, respectively with the predominance of yard tractors.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.273-280
• /
• 1997

Recently the importance of the cargo handling equipments in a port has been increasing to get strong competition from other ports. Many ports are making efforts to modernize their cargo handling equipments. The kernel technology of such equipments is the speed control of DC motor which is used as an essential part of them. In this paper, we discuss the speed control of a DC motor as a basic work for building cargo handling equipments in a port. DC Motors are still widely used in industrial fields, as driving power motor for electrical fields. DC drives, being easy to control, are widely used in many variable-speed and position control drive system. Traditional analog control circuits used in such applications have many disadvantages. Complex control schemes are difficult to implement with analog components. All these factor and invention of the microprocessor has made it possible to use digital control circuits, using microprocessing system. These digital circuits have been found to be reliable, flexible, and also immune to noise. In this paper it presents the speed control of a SCR DC motor driver which using dual converter by 80c196kc microprocessor. We developed a thyristor power amplifier which does not cause damage thyristor because it is designed to prevent triggering the two SCRs in the same arm simultaneously. And it was analyzed voltage and currents wave at reactive load.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.3
• /
• pp.57-68
• /
• 1993

The economy of Korea has grown up significantly in its scale. It has, therefore, become imperative to develop countermeasures to prevent work related injuries and occupational illnesses resultining from haza-rdous working conditions and handling harmful substances. A lot of cargo handling accident in port have occurred due to the characteristics of poor working environment, diversity of working place and method, fluctuation of the amount of cargo and handling of heavy, long, harmful and dangerous cargo, etc. According to '91 industrial accident analysis carried out by the ministry of labour, the number of the stevedores injured by cargo handling accident in port were 1, 432 persons (the death accident : 22 per-sons), the amount of industrial accident compensation in port was 6.7 billion won (the amount of economic loss : 33.6 billion won), and the injury occurance rate of the stevedoring industry was higher than that of the whole industry. This paper, therefore, aims to the actual status of the stevedoring industry and to extract the main cau-ses of the accidents related to cargo handling in port through factor analysis using the data of the accide-nts in the whole habour from 1990 to 1992, and to suggest the countermeasures to prevent such accident. The main causes of the accident and countermeasures are found to be as follows through the factor analy-sis : Factor1, factor2, and factor3 related to a defect of human being and management, a defect of state and environment, and an insufficiency of education and law are extracted. The short-term countermeasures to prevent these accidents are 1) to consolidate the safety and health organization in the working spot, 2) to secure a safe condition in working spot before dock work, 3) to strengthen a dock worker's safety educa-tion. The long-term countermeasures are 1) to promote a decasualisation of dock workers, 2) to modernize the cargo working methods through constructing exclusive pier and introducing exclusive cargo handling equipment, 3) to establish a exclusive dock accident prevention organization and the dock workers law. Factor 4, factor5, factor6, and factor7 related to an unfitness, a deficiency of technical knowledge, a nonfu-lfilment of safety measures, and a bad arrangement are extracted. The countermeasures to prevent these accidents are 1) to perform a complete safety inspection of cargo handling equipments and tools and to carry out the dock work according to a working plan, 2) to publish and supply technical safety books, safety instruction book, safety check list, etc., 3) to strengthen the safety patrol at the working spot in habour and to activate a safety fund, 4) to maintain always a clean workshop with the safety consciousness in which the good arragement of the working spot is considered to be the beginning of safety.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.3
• /
• pp.278-286
• /
• 2019

The Port of Pyeong Taek is located on the west coast, meaning that the difference between the rise and fall of tide is great (flood tide 1.8 to 2.9 knots, ebb tide 1.6 to 2.9 knots). Due to mainly N~NW'ly strong winds & high waves during winter, navigating as well as loading & discharging vessels must focus on cargo handling. The strong tidal and wind forces in the Port of Pyeong Taek can push an LNG carrier away from its berth, which will end up causing forced disconnection between the vessel's cargo line and shore-side loading arm. The primary consequence of this disconnection will be LNG leakage, which will lead to tremendous physical damage to the hull and shore-side equipment. In this study, the 125K LNG Moss Type ship docked at No. 1 Pier of the Pyeong Taek is observed, and the tension of the mooring line during cargo handling is calculated using a combination of wind and waves to determine effective mooring line and mooring line priority management. As a result if the wind direction is $90^{\circ}$ to the left and right of the bow, it was found that line monitoring should be performed bearing special attention to the Fore Spring Line, Fore Breast Line, and Aft Spring Line.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.5 s.72
• /
• pp.57-62
• /
• 2006

The most important thing in acontainer terminal is to handle the cargo effectively in the limited time available. To achieve this objective, many strategies have been introduced and applied. To create an automated container terminal, it is necessary for the cargo handling equipment to be equipped with more intelligent control systems. From the middle of the 1990's, automated rail-mounted gantry cranes (RMGC) and rubber-tired gantry cranes (RTG) have been widely used to handle containers in yards. Recently, many pieces of equipment, like CCD cameras and sensors, have beenmounted in these cranes to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes, which allow for more effective cargo handling in yards. For this purpose, the modeling, tracking control, anti-sway system design, skew motion suppressing, and complicated motion control and suppressing problems must be considered. Especially, in this paper, the system modeling and a new tracking control approach are discussed, and an experimental study is performed based on a two-degree-of-freedom (2DOF) servosystem design.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.114-122
• /
• 2006

The most important thing in the container terminal is to handle the cargo effectively in a limited time. To achieve this objective, many strategies have been introduced and applied. If we consider the automated container terminal, it is necessary that the cargo handling equipment is equipped with more intelligent control systems. From the middle of the 1990s, an automated rail-mounted gantry crane (RMGC) and rubber-tired gantry crane (RTG) have been developed and widely used to handle containers in the yards. Recently, in these cranes, equipment like CCD cameras and sensors have been mounted to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes that make the cargo handling be performed effectively in the yards. For this plant, we ought to consider modeling, tracking control, anti-sway system design, skew motion suppressionand complicated motion control and suppressing problems. In this paper, the system modeling and a tracking control approach are discussed, based on a two-degree-of-freedom (2DOF) servo-system design. From the simulation results, the good control performance of the designed control system is evaluated.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.621-628
• /
• 2008

Container terminals keenly compete with one another because of the continuous increase of container flows and the appearance of large-sized vessels. Major cargo handling equipment manufacturers are interested in the development of new conceptual equipment to greatly increase its productivity. In this study, a two-phase procedure is suggested for selecting the optimal development alternatives, when various development alternatives for container cranes are given. The first phase removes the alternatives that violate essential requirements and the second phase selects final alternatives by the evaluation of experts and the linear assignment method. Finally, a case applying the procedure is provided.

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.311-317
• /
• 2010

Mobile Harbor(MH) is a new paradigm for maritime transport system introduced in Korea, the target of which is to carry out ship-to-ship cargo operation rapidly and effectively even under a condition of sea state 3. A MH ship is moored alongside a large container vessel anchored at the defined anchorage and also equipped with gantry cranes for handling containers. The MH study concerned includes rapid container handling system, optimum design for floating structure, hybrid berthing & cargo operation system, design for cargo handling crane, etc. This paper is to deal with a conceptual design of a stabilized mooring system and mooring equipment under a condition of ship-to-ship mooring. In this connection, we suggest a positioning control winch system in order to control heave motions of the MH ship which is to add constant brakepower and stabilized function to an auto-tension winch and mooring equipment used currently in large container ships.