• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.85-92
• /
• 2015

In general, when ships are designed, structural strength and fatigue strength must be verified based on the relative rules respectively. In case of Slurry Iron Sand Carrier designed to carry Iron-Sand saturated at water content, there is no special consideration of fatigue strength analysis. However, this vessel is similar to Ore Carrier in consideration of the overall characteristics of loaded cargo and the shape of cargo hold. Therefore we verified fatigue strength based on fatigue analysis procedure of ore carrier in DNV Rules and carried out the study for improving of fatigue strength of Slurry Iron Sand Carrier.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.33-43
• /
• 2019

A comparison between sea trial measurements and full-scale CFD results is presented for two self-propelled ships. Two ships considered in the present study are: a general cargo carrier at Froude number $F_n=0:182$ and a car carrier at $F_n=0:254$. For the general cargo carrier, the propeller rotation rate is fixed and the achieved speed and trim are compared to sea trials, while for the car carrier, the propeller rotation rate is adjusted to achieve the 80% MCR. In addition, three grids are used for each ship in order to assess the grid refinement sensitivity. All simulations are performed using the Naval Hydro pack based on foam-extend, a community driven fork of the OpenFOAM software. The results demonstrate the possibility of using high-fidelity numerical methods to directly calculate ship scale flow characteristics, including the effects of free surface, non-linearity, turbulence and the interaction between propeller, hull and the flow field.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.73-76
• /
• 2005

Recently, the demand for the Floating, Production, Storage, and Offloading facility (FPSO) which has some economic and technical advantages, has increased in offshore oil production areas. FPSO vessel dose not have self-propulsion system, but has additional facilities for oil production and positioning system. Main noise sources such as gas turbines, compressors, and pumps, are located on top of the hull (Topside area). In general, the noise regulation for the offshore structure is severer than that of the cargo ship and acceptable noise limit of cabin is specified as 45 dB(A). This paper describes the noise characteristics and the countermeasures for FPSO Topside area through investigation of noise analysis and site measurement results. Proper countermeasures, considering the characteristics of sources and receiver spaces, were applied from the noise prediction and various measurement results. Finally, this ship was successfully delivered with excellent noise properties.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.4
• /
• pp.46-54
• /
• 1980

The ship structural design problem is formulated as a general nonlinear optimization problem with constraints. Characteristics of the general structural problems and various optimization techniques are discussed, with special emphasis on penalty function method for constrained problems. A simple example of the solution of a midship structure design of cargo vessel, which complies with the rules of the Korean Register of Shipping is shown using SUMT-exterior method with some search methods.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.307-313
• /
• 2016

When liquefied natural gas (LNG) is stored in a tank, it is necessary to maintain low temperature. It is very important that insulation techniques are applied to the LNG cargo because of this extreme environment. Hence, laminated wood, especially plywood, is widely used as the structural member and insulation material in LNG cargo containment systems (CCS). However, fracture of plywood has been reported recently, owing to sloshing effect. Therefore, it is necessary to increase the strength of the structural member for solving the problem. In this study, compressed wood, which is used as a support in LNG independent type B tanks, was considered as a substitute for plywood. Compression and bending tests were performed on compressed wood under ambient and cryogenic temperatures to estimate the mechanical behaviors and fracture characteristics. In addition, the direction normal to the laminates surface was considered as an experimental variable. Finally, the feasibility of using compressed wood for an LNG CCS was evaluated from the test results.

• Journal of Korea Port Economic Association
• /
• v.34 no.3
• /
• pp.93-112
• /
• 2018

The purpose of this study is to analyze the flow of e-commerce freight transported by maritime transportation for China and to identify the characteristics of cargo by region/item for finding the ways to promote e-commerce export to China. Thus, this study analyzed the e-commerce export and import data on cargo moved via maritime transportation between Korea and China from 2015 to 1Q18, using Origin-Destination(OD) analysis and visualization techniques. The results indicated that the largest number of Chinese e-commerce cargoes were imported at Incheon Port, which has a clearance facility for e-commerce cargo. In the case of Pyeongtaek Port, e-commerce cargo imported from China has transported to Incheon Customs again, causing the inefficiency through the customs clearance process. Unlike the case of e-commerce imports where the final destination is distributed nationwide, e-commerce products exported to China through maritime transportation were found to be mainly confined to Seoul and Gyeonggi provinces, where freight forwarding companies and forwarders are concentrated. In addition, unlike e-commerce import cargoes, e-commerce items exported through maritime transportation were mainly confined to clothing and cosmetics, and export volume was also less than imports. This study provides some possible strategies to increase the volume of freight and to attract export products as follows: i) to diversify products exported to China through e-commerce transshipment, ii) to diversify export items by building the cold chain in e-commerce transport with China.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.10
• /
• pp.791-797
• /
• 2003

A liquid storage rectangular tank structures are used In many fields of civil, mechanical and marine engineering. Especially, Ship structures have many tanks In contact with Inner or outer fluid, like ballast, fuel and cargo tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these thin walled tanks in contact with fluid near engine or propeller are strongly affected by added mass of containing fluid. Therefore it is essentially important to estimate the added mass effect to predict vibration of the tank structures. In the previous report, we have developed numerical tool of vibration analysis of 3-dimensional tank structure using finite elements for plates and boundary elements for fluid region. In the present report, using the numerical analysis, vibrations characteristics In deep water tank are investigated and discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1079-1084
• /
• 2003

A liquid storage rectangular tank structures are used in many fields of civil, mechanical and marine engineering. Especially, Ship structures have many tanks in contact with inner or outer fluid, like ballast, fuel and cargo tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these thin walled tanks ill contact with fluid near engine or propeller are strongly affected by added mass of containing fluid. Therefore it is essentially important to estimate the added mass effect to predict vibration of the tank structures. In the previous report, we have developed numerical tool of vibration analysis of 3-dimensional tank structure using finite elements for plates and boundary elements for fluid region. In the present report, using the numerical analysis, vibrations characteristics in deep water tank are investigated and discussed.

• Journal of Navigation and Port Research
• /
• v.38 no.1
• /
• pp.65-71
• /
• 2014

Gyeongbu and Namhae expressways in the country, are the major arterial highways which are connected with the Busan port in the north-south and east-west directions, respectively, and required to study the traffic characteristics about the hourly volume factors(K-factor) by concentrated midium-size and large-size cargo trucks of 20% or higher in expressways. We therefore attempted to predict the K-factor in expressways through the correlation analysis between K-factor and K-factor estimates on the basis of the short-term VDS data collected at the basic segments of the above major expressways. As a result, power model appeared to be appropriate in predicting K-factor by the K-factor estimate based on VDS data for 7 days with a high explanatory power and validity.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.61-67
• /
• 2015

Inland transport becomes more and more important in connecting ports with inland. Therefore, studying on cargo flow from ports to regions has been active in progress by many researchers. However current statistical data of freight flow from origin locations to destination locations does not reflect the exact characteristics of freight flow. Also, they also do not reflect the characteristics of multimodal transport system in which cargos go through intermediate locations such as logistics center or inland container depot. In growing up the emergent need of rebuilding statistical data for freight flow from origin locations to destination locations, this paper will propose a freight flow model with logistics center and it will be verified by genetic algorithm through the simulation scenarios.