• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.946-952
• /
• 2013

Large scale fire tests were conducted to develop water mist nozzles as a component of fixed water- based fire fighting systems for Ro-Ro spaces and special category spaces. Fire scenarios for this system consist of two cases which are for cargo fire in a simulated truck and for passenger vehicle fire, and each case has 3 different tests according to the position between fixed water mist nozzles and fire source. Every experiment proceeded for 30 minutes and acceptance criteria were based on gas temperature, fuel package's damage and ignition of targets. This study primarily dealt with the experimental results of cargo fire and focused on fire suppression capability in accordance with discharge pressure, flow rate and flow characteristics like swirl and penetration of the developed water mist nozzles. It appeared that low pressure water mist nozzles with about 40 L/min were able to control fire occurred in Ro-Ro spaces.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.1
• /
• pp.17-23
• /
• 2021

The membrane-type Liquefied Natural Gas (LNG) cargo tank is equipped with a double barrier to seal the LNG, of which the secondary barrier serves to prevent LNG leakage and mainly uses fiber-reinforced composite materials. However, the composite materials have thermal expansion anisotropy, which deteriorates shape distortion and mechanical performance due to repeated thermal loads caused by temperature changes between cryogenic and ambient during the unloading of LNG. Therefore, in this study, the longitudinal thermal expansion characteristics of the composite materials were obtained using a vertical thermo-mechanical analyzer, and the elastic modulus was obtained through the tensile test for each temperature to perform thermal load analysis for each direction. This is considered that it is useful to secure reliability from the viewpoint of the design of materials for a LNG cargo hold.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.128-135
• /
• 2020

Long-term shipping contracts represent the cooperative and coexisting relationships between the shipping and steel industries. Yet, differences between the contract forms for iron ore and steel products have emerged. Specifically, the large proportion of consecutive voyage charters (CVC) is being applied in the iron ore trade, whereas the contract of affreightment (COA) is proportionally higher for shipping steel products. The literature review and in-depth interviews in this study identified through the research model, the characteristics of the shipping and market structure in both markets have significantly contributed to the preference of different long-term contracts. It has been determined that the mutual oligopoly market structure and the characteristics of shipping such as, the small number of suitable vessels in the market, the single fixed load/discharge ports, the long-distance voyages, and the potential risks for fatal accidents because of cargo liquefaction, for the iron ore trade, provide higher contribution to the preference of CVC contracts. In contrast, the consignor oligopoly market structure and the shipping characteristics, such as the greater number of suitable vessels available in the market, the variation in ports, the cargo quantity per shipment, the various load/discharge ports, and the need for experienced carriers for steel product loading in the steel product trade has shown higher preference on the COA contracts as the consignors with superiority over the shipowners, resulting in favorable contract types and conditions for the consignors.

• Journal of Korea Port Economic Association
• /
• v.33 no.3
• /
• pp.105-120
• /
• 2017

This study analyzed changes in the competitive structure of the global shipping container market and the appropriate capacity of the container fleet in Korea from three perspectives. The competitive market analysis applied the market concentration ratio and Hirschman-Herfindahl index, while the appropriate capacity analysis was based on the following three aspects: (1) Fleet capacity to secure competitiveness in the global shipping alliance; (2) Fleet capacity to increase national fleet coverage of domestic import and export container cargo; and (3) Fleet capacity analysis through the panel model considering the characteristics of the major shipping countries. Analysis of the global shipping container market reveals an oligopoly industry, and Korea's container fleet capacity is insufficient across all three analyses.

• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.230-235
• /
• 2011

Reinforced polyurethane foam (RPUF) is one of the important materials of Mark III type insulation systems used in liquefied natural gas (LNG) cargo containment systems. However, RPUF is the most difficult material to use with regard to its safety assessment, because there is little public and reliable data on its mechanical properties, and even some public data show relatively large differences. In this study, to investigate the structural response of the system under compressive loads such as sloshing action, time-dependent characteristics of RPUF were examined. A series of compressive load tests of the insulation system including RPUF under various temperature conditions was carried out using specimens with rectangular section. As a result, the relationship between deformation of RPUF and time is linear and dependent on the loading rate, so the concept of strain rate could be applied to the analysis of the insulation system. Also, we found that the spring constant tends to converge to a value as the loading rate increases and that the convergence level is dependent on temperature.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.148-153
• /
• 2008

As the oil price is dramatically jumping up, the consumption of LNG is rapidly expanding and the size of LNG carriers becomes bigger. For LNG ships, the application of DF (Dual-Fuel) engines gradually increases because of high efficiency, which alternatively use diesel or BOG (Boil-Off Gas) from cargo tank as a fuel. The surplus BOG from LNG cargo tank should be exhausted by GCU or liquefied through the BOG reliquefaction system and returned back. This study focused into its operational characteristics through the process simulation using HYSYS and discussed details on the influence of the variations of some operational parameters such as a distribution ratio by the change of fuel mass flow into the DF engine.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.3
• /
• pp.343-350
• /
• 2009

Recently ship safety regulations are being reinforced to improve maritime safety and to prevent maritime pollution by International Maritime Organization. It means that the regulation is becoming more proactive rather than reactive. In the mean time, design philosophy is also moving from rule based design to performance and simulation based design. In this paper, a study on practical application of the damage safety assessment system is carried out. The damage stability and the survivability of a cargo ship that was designed based on current regulation is investigated using performance based design tools in order to improve the safety of the design and verify the performance of the developed damage safety assessment system. To do this, damage scenarios is established and the characteristics and geometry the cargo ship is modeled. A new design alternative is proposed with small change in the internal arrangement based on safety evaluation results of the current design.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.91-92
• /
• 2013

With development of port industry, inland transportation was also the developed. Connecting port with inland becomes more and more important. So studies about cargo flow from ports to regions are actively in progress. But freight statistics from regional to national has a problem that do not comprehend exactly with freight flow. Also these statistics don't reflect characteristics of multimodal transportation system. The objective of this paper is to analyze freight flow of container with the introduction of P/C and rebuilding freight statistics from regional to national scale.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.916-922
• /
• 2017

Security systems for inland cargo truck transportation are mostly limited to route tracking for safe and efficient transportation. With this route tracking system, the status of cargo trucks can be monitored easily within inland boundaries. In case of oil transportation by land, however, security systems ensuring transportation of a designated quantity of products have been subject to extensive research since thefts and substitution by a similar product in the transportation process have emerged as a social problem. Security devices installed in an oil tank truck must meet the explosion-proof performance standards and be applicable to varying types of trucks. Accordingly, a wireless electronic seal with RF communication functions is considered to be the most appropriate method, but e-seals on moving vehicles require such levels of performance and reliability that can overcome certain challenges including changing radio waves and topographical impediments. Considering these characteristics of oil tank trucks, this study proposes an stabilization method to enhance the RF communication performance of e-seals, based on radio simulation and experiment findings.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.329-336
• /
• 2017

This study suggests a general process of analyzing the mooring and cargo handling limit waves, which is an incident to the new energy port under long wave agitation. To reduce damages of ships and harbor structures due to strong wave responses, it is necessary to predict the change of wave field in the mooring berth to make the proper decision by dock master. The berthing area at a new LNG port in the east coast of Korea in this study is frequently affected by oscillations from waves of 8.5~13s periods in the wintertime. The long period waves give difficulties on port operation by lowering the annual berthing ratio. It needs to find the event waves from the real time offshore wave records, which cause over the mooring limits. For that purpose, the wave records from field measurement and offshore wave buoy were analyzed. From numerical simulation, the response characteristics of long period waves in the berthing area were deduced with or without breakwater expansion plan, analyzing the offshore field wave data collected for two years. Some event wave cases caused over the cargo handling and mooring limits as per the standard Korean port design guideline, and those were used for the decision of port operation by dock master, comparing with the real time offshore wave observations.