• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.8-14
• /
• 1994

The aim of this paper is the introduction and investigation of the characteristics and outline of self-unloading systems from the bulk handling point of view. Some years of experiences from the building of self-unloading bulk carriers are described hereunder.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.79-84
• /
• 2015

A BC-B type bulk carrier is rarely built, so the structural characteristics is not reported and familiar so far. The biggest difference between BC-B and BC-A type vessel is applying alternate cargo loading, which density is over $1.0ton/m^3$. In this paper, 150K DWT class BC-B type bulk carrier is calculated and compared with BC-A type vessel, which has same condition such as main dimension and deadweight, about prescriptive rule and FEA based on CSR. And aspect ratio of target vessel is smaller than typical capsize bulk carrier, so 150K and 180K bulk carrier, which applied BC-A type, are also compared to find feature of wide beam vessel.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.350-358
• /
• 2010

The present paper deals with the comparative study of resistance performance with refrigerated ice and synthetic ice according to the variation of hull form characteristics. The resistance test has been conducted in pack ice condition in each concentration condition. Stem angle has been chosen as main parameters for the variation of hull form characteristics. The correlation of performance between with the refrigerated ice and with the synthetic ice has been shown according to the variation for stem angles. The present study show the possibility of ice test in general towing tank with synthetic ice for the time-consuming research such as hull form optimization although that is confined in pack ice condition. The more parametric study for the properties of synthetic ice is expected to be conducted to have more close correspondence for the test results of refrigerated ice in near future.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.2
• /
• pp.13-27
• /
• 2005

Many countries of the world is driving forward development of large-scale hub port. They are now pushing ahead with setting up of effective marketing strategies to survive in keen competitions of the 21st century port industry. The port is of ever increasing importance for the bridge connecting sea and road transportation in handling international cargoes. The port, differently from general working places, is a closed area required for security, customs, and quarantine procedures. The loading and unloading is being done differently by ports, cargoes, and ships. To do loading and unloading, a lot of equipment and different types of labor are required, which flow is complicated and safe management is essential. As above mentioned the port is very unique and very deteriorated working place in its working environment. The purpose of this study is to propose ways to reduce and prevent from port accidents. As first step to do this, we have collected 923 accidents happened at Incheon Port during the period of 1994 to 2003. We have thoroughly analyzed characteristics, harmfulness, and risk of the loading/unloading they have done, as well as the accident frequency and relationship between the accidents. As second step to further analyze, We have employed DMAIC technology, an advanced process of 6 sigma presently in spotlight as the best program for management innovation. This analysis results in recognition of important accident characteristics, causes and effects analysis, critical causes of accident, and suggestions to decrease accidents.

• Journal of Korea Port Economic Association
• /
• v.34 no.2
• /
• pp.51-68
• /
• 2018

This paper compares the differences in management performance in the logistics market and analyzes the differences in business characteristics depending on the industry types. In addition, the effects of industry types and business characteristics on management performance are examined. The analysis method used is ANOVA and K-means clustering. The implication of the study are as follows. First, in the logistics market in Japan, there was a difference in management performance among the types of industry. The warehousing service type had the highest profitability and stability among all the industry types. Second, differences in business characteristics by industry types were tested. It was found that offshore cargo transportation type was more capital intensive than the other types. In addition, warehousing service type had higher business leadership and credit transaction than others. Third, industry types and clusters based on business characteristics had a significant impact on management performance through interaction effects. For the profitability variables in detail, other clusters had a significant effect between transportation types(onshore and offshore cargo) and warehousing service type. On the other hand, in stability variables, one cluster was effective in all types, which is a characteristic that lowers both capital intensity and business leadership.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.193-202
• /
• 2006

The Consultative Meeting of the Convention on the Prevention of Marine Pollution by Dumping of Wastes and other matter, 1972 (London Convention 1972) has requested to International Maritime Organization (IMO) Marine Environmental Protection Committee to collaborate and help clarify a boundary issue between International Convention for the Prevention of Pollution from Shops, 1973 as modified by the Protocol of 1978 (MARPOL) and the London Convention concerning 'dumping' versus 'discharges' during normal operations of ships in 2004, and subsequently established a Joint London Convention/MEPC Correspondence Group. The Contracting Parties to London Convention expressed their environmental concerns on the broad interpretation of the "cargo-associated wastes" by the States, which could be discharged by ships under MARPOL. Regulatory regimes for the cargo residues appear to vary among states. Some countries require fur ships to discharge their cargo wastes into the port reception facility and IMO also recommends doing so. This paper examines the related current national and international legal texts for the regulation of disposal of wastes from ships in order to analyze the current global concern on the marine pollution associated with waste discharge during operations of ships. In particular, we attempt to evaluate the likely marine environmental consequences arising from the disposal of cargo residue using an hypothetical case for the coal cargo residue among bulk cargos in this paper, since location, magnitude and frequency of the discharge of coal cargo residues into the sea adjacent to Korean Peninsula are not readily available. The cargo residues may be discharged to the sea according to MARPOL 73/78; however, its marine environmental consequences can be significant depending upon the characteristics and amounts of wastes to be discharged. Also the public tolerance of the environmental consequences would be widely different among nations. Multilateral environmental agreements, in general, more strictly apply their rules if there are other options to disposal at sea, i.e. port reception facility in this case. Therefore, port reception facilities for the wastes generated by ships are recommended to be further constructed in major national ports in order to reduce the risk of environmental damages during the operations of ships.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1567-1573
• /
• 2010

The purpose of this study is to develop spatial configuration and area calculation method of warehoue. This paper deals with warehouses with palletized cargo since recently pallets are widely used in many warehouses to enhance efficiency. We identify spatial configuration and characteristics of each area. To represent realistic situations, we analyze characteristics of logistics equipment as well as interview results with expert warehouse architects. Through these analysis we suggest guidelines on area calculation of warehouse.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.53-59
• /
• 2019

To reduce the vibrations and shocks during the cargo transportation of high value-added goods, the vibration history was measured on the truck transportation section (Asan-Uiwang) and the freight train transportation section (Uiwang-Pusan). The internal vibrations of the container were obtained by attaching acceleration sensors in three axis directions (longitudinal, lateral. and vertical directions) on the front and rear bogies. The rail vibration profile (0.29Grms) proposed in ASTM D-4169 was approximately 50% higher than the truck vibration profile (0.54Grms). The overall vibration was 16% and 33 % lower in the longitudinal and transverse directions, respectively, compared to the ASTM truck transport vibration profile. On the other hand, the vertical vibration measurement history partially exceeded the ASTM truck transport vibration profile over the range, 4 - 15Hz, and over 60Hz. The vibration measurement history of the cargo train was similar to that of the road. The longitudinal and lateral vibration history was lower than the ASTM D-4169 rail vibration profile, while the vertical history was over 30Hz.

• Korea Trade Review
• /
• v.48 no.3
• /
• pp.69-88
• /
• 2023

This study analyzes the dynamic characteristics of cargo volume (demand), ship fleet (supply), and freight rate (price) of container, dry bulk, and tanker shipping markets by using the VAR and VECM models. This analysis is expected to enhance the statistical understanding of market dynamics, which is perceived by the actual experiences of market participants. The common statistical patterns, which are all shown in the three shipping markets, are as follows: 1) The Granger-causality test reveals that the past increase of fleet variable induces the present decrease of freight rate variable. 2) The impulse-response analysis shows that cargo shock increases the freight rate but fleet shock decreases the freight rate. 3) Among the three cargo, fleet, and freight rate shocks, the freight rate shock is overwhelmingly largest. 4) The comparison of adjR² reveals that the fleet variable is most explained by the endogenous variables, i.e., cargo, fleet, and freight rate in each of shipping markets. 5) The estimation of co-integrating vectors shows that the increase of cargo increases the freight rate but the increase of fleet decreases the freight rate. 6) The estimation of adjustment speed demonstrates that the past-period positive deviation from the long-run equilibrium freight rate induces the decrease of present freight rate.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1069-1075
• /
• 2012

Laser is high density heat source, so it can make high speed welding with minimum heat input possible. Especially the high power fiber laser is recently commercialized and has high beam quality and the smallest system size compared with conventional laser due to it's unique oscillating mechanism. Because of these advantages it's thought that the most suitable heat source for LNG cargo tank welding precess which has to be conducted inside of ships. In this study fiber laser was used for welding of stainless steel for LNG carrier to applicate laser welding technique for shipbuilding industry. 1.2mmt STS304L of austenite stainless steel which apply to cargo tank was used for fiber laser welding. Butt and lap welding was conducted changing laser power, welding speed, then penetration characteristic was analyzed and optimal parameters for each materials. Consequently, we found that same or better mechanical properties were obtained in weld compared to base metal.