• Journal of Pharmacopuncture
• /
• v.19 no.1
• /
• pp.21-27
• /
• 2016

Objectives: The present study was undertaken to evaluate the immunomodulatory (IM) activity of IM-133N, a herbal combination in various immunotherapeutic experimental models. Methods: The IM activity of IM-133N was evaluated against three experimental models namely, effect of IM-133N against Escherichia coli (E. coli)-induced abdominal sepsis in mice, and carbon clearance test was performed in Wistar albino rats to evaluated the phagocytic potential of IM-133N, in addition IM-133N was evaluated for its immunoglobulin enhancing potential in rats, where the immunoglobulin levels were measured by zinc sulphate turbity (ZST) test. Further, IM-133N was subjected for detailed liquid chromatography-mass spectrometry (LC-MS)/MS analysis to identify the probable active constituents present in it. Results: The findings of the present study has demonstrated very promising IM property of IM-133N in all the experimental models. Briefly, pretreatment with IM-133N at 125, 250, 500 and 1,000 mg/kg, p.o. doses had protected the mice against E. coli-induced abdominal sepsis and mortality, further the effect of IM-133N was found to be significant and dose-dependent. In support of this, in another study administration of IM-133N showed a significant and dose-dependent increase in serum immunoglobulin levels, estimated by ZST test. In line with the above findings, in the carbon clearance test the low doses (125 and 250 mg/kg, p.o.) of IM-133N increased the rate of carbon clearance, whereas the higher doses (500 and 1,000 mg/kg, p.o.) did not sustain the response, and saturation effect was considered as one of the possible reason for futility of higher doses for IM-133N. In addition, A detailed LC-MS/MS analysis of IM-133N showed 17 bioactive phytochemical constituents: namely, apigenin, chaulmoogric acid, mesquitol, quercetin, symphoxanthone, salireposide, ${\beta}$-sitosterol, nonaeicosanol, ${\beta}$-amyrin, betulic acid, oleanolic acid, symplososide, symponoside, symploveroside, symplocomoside, symconoside A and locoracemoside B. Conclusion: These findings suggest that IM-133N possesses significant IM activity and, hence, could be useful for eradicating opportunistic disease-triggering pathogens via immunotherapeutic mechanisms. The findings also suggest IM-133N may also useful in other immunity disorders.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.537-541
• /
• 2010

Pt-Sn with various ratios was supported on carbon black after pretreatment in an acidic solution by a reduction method. The Pt/Sn ratio was controlled by varying the concentration of each component in the solution, and the influence of the composition on the electrocatalytic activities was investigated. The crystallinity of the synthesized materials was investigated by XRD (X-ray Diffraction), and the oxidation states of both the platinum and tin were determined by XPS (X-ray Photoelectron Spectroscopy). SEM (Scanning Electron Microscopy)-EDS (Energy Dispersive Spectroscopy) was utilized to examine the morphology and composition of the synthesized electrode, and the particle size of the Pt-Sn was analyzed by TEM (Transmission Electron Microscopy). The electrocatalytic activity for oxygen reduction was evaluated in a 0.5 M $H_2SO_4$ solution using a rotating disk electrode system. The activity and stability were found to be strongly dependent on the electrode composition (Pt/Sn ratio). The catalytic activity and stability for methanol oxidation were also measured using cyclic voltammetry (CV) in a mixture of 0.5 M $H_2SO_4$ and 0.5 M $CH_3OH$ aqueous solution. The addition of proper amount of Sn was found to significantly improve both catalytic activity and stability for methanol oxidation.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.5
• /
• pp.571-580
• /
• 2008

The influence of bacterial stress on anaerobic hydrogen-producing microorganisms was investigated in batch tests using serum bottles. Several physical and chemical stresses (i.e., heating, adding methane producing inhibitor and chemical acidification) were adapted as a pretreament of the seed sludge. In this experiment, the cultivation temperature were set at mesophilic ($35^{\circ}C$) and thermophilic conditions ($55^{\circ}C$) with adjusting pH at 5, 6, and 7 when using the mixture of food waste and activated sludge as a substrate. In conjunction with the pretreatment, hydrogen production was significantly enhanced as compared with that from untreated sludge. However, less biogas (hydrogen and methane) was produced without the pH control, resulted from the decrease of pH to below 4, mainly due to the formation of VFAs. Hydrogen and carbon dioxide gas were analyzed as main components of the biogas while methane not detected. With an application of chemical acidification, the highest hydrogen production value of 248 ml/l/day achieved at pH 7 and $35^{\circ}C$. In addition, more hydrogen gas produced when the ratio of butyric/acetic acid ratio increased. The optimum pH and temperature for hydrogen production were found to be 7 and $35^{\circ}C$, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.213-220
• /
• 1993

The problem of disposing of huge quantities of used tires is of growing concern to every country. As an economical solid waste management, a gasification followed by incineration process was applied to scrap tires to recover heat and to reduce waste volume for final landfill disposal. The gasification temperature, combustible and non-combustible gasified products and possibly produced air pollutants were predicted by changing equivalent mole ratios of carbon to oxygen by a chemical equilibrium model. For a risk assessment of ash toxic pollutants including heavy metals and toxic organics were thoroughly analyzed. Gasification bottom ash contained much more toxic organic compounds than fly ash, whereas fly ash contained higher concentration of heavy metals such as Pb and Cd. Pretreatment or secure landfill technology is suggested for a safe management of ash produced from the gasification incinerators.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.3
• /
• pp.409-417
• /
• 2018

Biologically produced 2,3-butanediol (2,3-BDO) has diverse industrial applications. In this study, schematic isolation and screening procedures were designed to obtain generally regarded as safe (GRAS) and efficient 2,3-BDO producers. Over 4,000 candidate strains were isolated by pretreatment and enrichment, and the isolated Bacillus strains were further screened by morphological, biochemical, and genomic analyses. The screened strains were then used to test the utilization of the most common carbon (glucose, xylose, fructose, sucrose) and nitrogen (yeast extract, corn steep liquor) sources for the economical production of 2,3-BDO. Two-stage fed-batch fermentation was finally carried out to enhance 2,3-BDO production. In consequence, a newly isolated Bacillus licheniformis GSC3102 strain produced 92.0 g/l of total 2,3-BDO with an overall productivity and yield of 1.40 g/l/h and 0.423 g/g glucose, respectively, using a cheap and abundant nitrogen source. These results strongly suggest that B. licheniformis, which is found widely in nature, can be used as a host strain for the industrial fermentative production of 2,3-BDO.

• Journal of the Korean Society of Food Culture
• /
• v.8 no.4
• /
• pp.331-335
• /
• 1993

This study was performed to improved the quality of dried persimmon. For this, the investigation of quality factor and processing experiments were performed. The moisture contents of dried persimmons were 30 to 36% and it was the most important component of the quality. Tannin contents were 0 to 20% and non-treated persimmon had higher tannin contents than treatment of carbon dioxide and alcohol. Total sugar contents were 55 to 60% and it was composed in glucose and fructose. Processing of dried persimmon by artificial-drying seemed to be useful when it needed to shorten the drying time or it continued rainy day during sun-drying. From the result of quality evaluation, sliced dried persimmon was better than whole dried persimmon in quality, so the sliced dried persimmon was expected that it has a little marketability.

• Membrane Journal
• /
• v.1 no.1
• /
• pp.78-95
• /
• 1991

Water factory 21(WF 2) in Orange County California, is a advanced wastewater treatment(AWT) plant designed to reclaim biologically treated munidpal wastewater for injection into a seawater barrier system. Processes included are lime treatment air stripping, filtration, activated carbon adsorption, reverse osmosis(RO), and chlorination. The effectiveness of each treatment process is presented including pretreatment, RO dimineralization. The data collected show that the processes, including RO, used at WF-21 are capable of producing a very high quality water on a reliable basis. Treatment reduced all contaminants, to levels below national primary drinldng water regulation maximum contaminant levels. It was found that lime clarified secondary effluent can be used as feedwater to a RO dimineralizer. Experiments with new low pressure membrane(250psi) show great potential for reducing RO cost.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.3 no.2
• /
• pp.71-77
• /
• 1998

The strain of Serratia marcescens QM B1466 produces selectively large amount of chitinolytic enzymes (about 1mg/L medium). Enzymatic hydrolysis of chitin to N-acetyl-${\beta}$-D-glucosamine (NAG) was performed with a system consisting of two hydrolases (chitinase and chitobiase) produced by optimization of a microbial host consuming chitin particles. For the development of Large-scale biological process for the production of NAG from chitinaceous waste, the selection and optimization of a microbial host, particle size of crab/shrimp chitin sources and initial induction time using chitin as a sole carbon source on chitinase/chitobiase production and NAG production were examined. Crab-shell chitin(1.5%) treated by dilute acid and , ball-milled with a normal diameter less than 250m gave the highest chitinase activity over a 7 days culture. Crude chitinase/ chitobiase solution obtained in a 10 L fed-batch fermentation showed a maximum activities of 23.6 U/mL and 5.1 U/mL, respectively with a feeding time of 3 hrs, near pH 8.5 at 30$^{\circ}C$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.3
• /
• pp.531-536
• /
• 1998

To investigate effects of Angelica keiskei Koidz green juice on the liver damage of CCl4-treated tats, Sprague-Dawley male rats weighing 80~100g were divided into 4 groups of control group(CON), Angelica keiskei Koidz green juice-treated group(ANJ), CCl4-treated group(CCL) and Angelica keiskei Kodiz green juice and CCl4-treated group(ACL). Each group was sacrified after feeding for 4 weeks and examined the activities of transminase (sGOT, sGPT), superoxide dismutase (SOD), catalase and glutathione peroxidase(GSH-Px), and contents of lipid peroxide and glutathione in liver. The activities of sGOT and sGPT, and content of lipid peroxide after CCl4 treatment were markedly increased, compared to CON, but those levels were significantly decreased by the pretreatment of Angelica keiskei Koidz green juice as compared to CCL. The activities of SOD, catalase and GSH-Px were elevated by CCl4-treatment as compared to control group, and concomitant treatment of Angelical keiskei Koidz and CCl4 decreased those levels significantly except the activity of catalase. The hepatic content of glutathione was decreased by CCl4 and increased more abundant by Angelica keiskei Koidz administration than CCl4 treated group. These results suggest that Angelica keiskei Koidz green juice is believed to have a possible protective effect for the carbon tetrachloride-induced hepatotoxicity in rats.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.6
• /
• pp.508-519
• /
• 2015

The objective of this study was to quantitatively estimate $PM_{2.5}$ source contribution in Gyeongsan. Ambient $PM_{2.5}$ samples have been collected on zefluor, quartz and nylasorb filter by $PM_{2.5}$ samplers of cyclone method from September 2010 to December 2012. Collected samples were analyzed for determining 17 inorganic elements, 8 ions, and 8 carbon components after pretreatment. Based on these chemical information, the PMF model was applied to estimate the quantitative contribution of air pollution sources. The results of the PMF modeling showed that the sources were apportioned by biomass burning source (15.5%), secondary sulfate source (16.0%), industry source (10.4%), soil source (7.0%), gasoline source (9.1%), incinerator source (10.4%), diesel emission source (11.0%), and secondary nitrate source (20.6%), respectively. To analyze local source impacts from various wind directions, the CPF analysis were performed using source contribution results with the wind direction values measured at the site.