• 제목/요약/키워드: Carbon oxidation

검색결과 1,102건 처리시간 0.029초

전기로 제강분진의 재활용과정에서 발생되는 Fe-Clinker의 자원화에 관한 연구 (A Study on the Resource Recovery of Fe-Clinker generated in the Recycling Process of Electric Arc Furnace Dust)

  • 윤재홍;윤치현
    • 자원리싸이클링
    • /
    • 제32권1호
    • /
    • pp.50-59
    • /
    • 2023
  • 전기로에서 고철(Scrap)의 용해과정에서 발생되는 분진량은 고철장입량의 약1.5%정도이며, 주로 백필터(Bag Filter)에서 포집된다. 전기로 제강분진의 주요한 구성원소인 아연(Zn)과 철(Fe)중에서 아연성분은, 제강분진에 탄소계의 환원재(코크스, 무연탄)와 석회석(C/S제어)을 첨가하여 Pellet형태로 가공한 후에 반응로(Rotary Kiln 또는 RHF)에 장입하여 환원, 휘발, 재산화의 단계적인 세부반응을 거쳐서, 60wt%Zn을 함유한 조산화아연(Crude Zinc Oxide)으로 회수된다. 한편 제강분진 중의 철(Fe)성분은, Fe-Base의 Clinker(2차부산물)라고 하는 고형물의 형태로 반응기로부터 배출된다. 기존의 Fe-Clinker의 처리방법은, 각국의 상황에 따라서 다양한 방안들이 시행되고 있는데, 대표적인 처리방법으로는 매립, 재활용(로반재, 콘크리트용 골재, 시멘트제조용 Fe-Source), 그 외에 다양한 처리방법들이 있다. 이들 방법들 중에서 매립의 경우는, 침출수에 의한 환경오염, 고가의 매립비용, Fe자원의 낭비 등의 이유로, 결코 바람직한 처리방법이라고 할 수는 없다. 그러나 Fe-Clinker중의 Fe성분을 전기로를 이용하여 직접적으로 재활용하는 방법에 대한 연구결과는 거의 찾아볼 수 없었다. 따라서 본 연구에서는 Fe-Clinker중의 Fe성분을 보다 적극적으로 회수하기 위한 방법으로서, 먼저 Fe-Clinker를 분쇄하고 이어서 비중선별과 자력선별을 순차적으로 실시하여, Fe-성분이 농축된 조분(Coarse particle, >약10㎛)과 슬래그성분을 주로 함유한 미분(Fine particle, <약10㎛)으로 분리하였다. 이렇게 분리한 조분에 탄소계 환원제(코크스, 무연탄)와 점결재(전분)를 첨가하여 단광 Clinker를 제조하여, 전기로에 고철을 장입할 때에 소량(1~3wt%)의 단광Clinker를 함께 장입하여, 단광Clinker의 첨가재(가탄재, Fe-Source, 발열재 등으로서의 역할)로서의 사용가능성을 조사하였다. 그 결과, 비록 소량이지만, 전력원단위와 생산수율이 다소 향상되는 효과를 나타내었으며, 용융금속에 대한 가탄효과도 확인할 수 있었다.

수도저위생산력(水稻低位生産力)의 원인구명(原因究明)에 관(關)한 영양생리적연구(營養生理的硏究) (Studies on Nutrio-physiology of Low Productive Rice Plants)

  • 박준규
    • Applied Biological Chemistry
    • /
    • 제17권1호
    • /
    • pp.1-30
    • /
    • 1974
  • 수도저위(水稻低位) 생산력(生産力)의 원인구명(原因究明)에 관(關)한 영양생리학적연구(營養生理적硏究)로 여러 가지 생육조건하(生育條件下)에서 품종별(品種別) 양분흡수(養分吸收) 및 동화기능(同化機能)과 양분(養分)의 체내(體內)에서의 이행양상(移行樣相)을 추구(追究)하는 한편 고수량지(高收量地) 벼와 저수량지(低收量地) 벼에 대(對)한 생육시기별(生育時期別)로 양분(養分)의 흡수(吸收) 체내무기양분(體內無機養分)과 수량(收量) 및 수량구성요소(收量構成要素)와의 관계(關係) 등(等)을 추구(追究)하여 저수량지(低收量地) 벼의 영양생리적(營養生理的) 저수요인(低收要因)을 밝히고저 본연구(本硏究)를 수행(遂行)하였던 바 그 결과(結果)를 요약(要約)하면 다음과같다. 1. 양분(養分)의 흡수력(吸收力)은 품종(品種)에 따라 차이(差異)가 있으며 인산(燐酸) 및 가리(加里)의 흡수력(吸收力)이 강(强)한 품종(品種)은 구사부에, 진흥(振興)이며 낮은 품종(品種)은 팔달(八達)이었다. 2. 근(根)의 ${\alpha}-naphthylamine$의 산화력(酸化力)과 인산(燐酸)의 흡수력(吸收力)과는 유의적(有意的)인 상관관계(相關關係)가 있으며 산화력(酸化力)이 높으면 인산(燐酸)의 흡수(吸收)가 증대(增大)되었바. 3, 탄소동화력( 炭素同化力)은 품종(品種)에 따라 차이(差異)가 있으며 노인도(老人稻), 구대내조욱(九大耐潮組) 3호(號), 수원(水原)82호(號), 진흥(振興) 등은 강(强)하고 대구조(大脚租), 관옥(關玉), 육우(陸羽) 132호(號)가 약(弱)하였다. 4, 질소(窒素)의 증시(增施)는 소비(少肥)에 비(比)하여 동화량(同化量)은 증가(增加) 되나 등화산물(同化産物)의 이삭으로의 이전(移轉)은 적었다5. 정상(正常) 생육(生育)한 벼에 비(比)하여 인산(燐酸), 가리(加里) 및 마그네슘이 결핍(缺達)된 벼는 전탄소동화량이(全炭素同化量)이 정상(正常) 벼 100에 비(比)하여 40이하(以下)로 현저(顯著)히 낮으며 그 순서(順序)는 Mg>P>K이고, 동화물(同化物)의 이전(移轉)에 장해(障害)가 큰 것은 K>Mg>P의 순(順)이었다. 6. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 총건물(總乾物) 생산량(生産量)이 현저(顯著)하게 많고 특(特)히 유수형성기(幼穗形成期) 이후(以後)에 증가량(增加量)이 더욱 현저(顯著)하였다. 7. 고수량지(高收量地) 벼는 출수기(出穗期)에 옆면적(葉面積)이 최고(最高)에 달(達)하였다가 그 이후(以後) 완만(緩慢)하게 줄어지나 저수량지(低收量地) 벼는 출수이전(出穗以前)에 엽면적(葉面積)이 최고(最高)에 달(達)하였다가 출수이후(出穗以後)에 급격(急激)히 감소(減少)되며 그 원인(原因)은 하엽(下葉)의 조기고사(早期枯死)에 기인(起因)되었다. 8. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 생육초기(生育初期)에는 투과광율(透過光率)이 높고 생육후기(生育後期)에 낮았으나 투과광율대(透過光率對) 엽면적비(葉面積比)는 고수량지(高收量地) 벼에서 높았다. 9. 순동화량(純同化量)은 저수량지(低收量地) 벼에 비(比)하여 고수량지(高收量地)벼에서 많았으며 이는 또한 엽면적(葉面積)이 증가(增加)됨에 따라 감소(減少)되었다. .10. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 유수형성기(幼穗形成期) 이후(以後) 체내질소(體內窒素), 가리(加里) 및 규산(珪酸)의 함유율(含有率)이 높으면서 $K_2O/N$, $SiO_2/N$ 비(比)가 높았다.11. 저수량지(低收量地) 벼는 고수량지(高收量地) 벼에 비(比)하여 출수기(出穗期)에 보유(保有)된 질소(窒素), 인산(燐酸), 가리(加里) 및 마그네슘등이 출수이후(出穗以後) 이삭으로의 이행율(移行率)이 높았다. 이는 저수량지(低收量地) 벼가 생육후기(生育後期)에 양분(養分)의 흡술량(吸收量)이 부족(不足)하여 체내(體內) 저장양분(貯藏養分)이 재이동(再移動)되기 때문이며 따라서 하엽(下葉)은 양분부족(養分不足)으로 조길고사(早期桔死)가 많아지는 것으로추정(推定)되었다. 12. 고수량지(高收量地) 벼는 질소흡수(窒素吸收)가 전생육기간(全生育期間)을 통(通)하여 완만(緩慢)하며 출수이후(出穗以後)에도 흡수량(吸收量)이 많으나 저수량지(低收量總) 벼는 출수이전(出穗以前)에 많고 출수이후(出濾以後)는 거의 흡수(吸收)되지 않았다. 13. 출수기(出穗期)의 체내(體內) 질소(窒素), 가리(加里) 함유율(含有率)과 수량(收豊)과는 현저(顯著)한 정(正)의 상관(相關)이 성립(成立)되였으며 수확기(收獲期)의 가리(加里), 규산함유율(珪酸含有率) 그리고 $K_2O/N$, $SiO_2/N$과 수량(收量)과도 현저(顯著)한 정(正)의 상관관계(相關關係)가 성립(成立)되었다. 14. 출수기(出穗期)에 보유(保有)된 전분(澱粉)이 이삭으로의 이전(移轉)은 고수량지(高收量地) 벼가 약(約) 10%인데 반(反)하여 저수량지(低收量地) 벼는 약(約) 40%로 많았다. 따라서 저수량지(高收量地) 벼는 출수(出穗) 이후(以後) 동화의존도(同化依存度)가 높았다. 15. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 질소(窒素), 인산(燐酸), 가리(加里), 규산(珪酸) 및 망간의 흡수량(吸收量)이 현저(顯著)하게 많았고 생육시기별(生育時期別) 흡수량(吸收量)의 차이(差異)는 유수형성기(幼穗形成期) 전후(前後)에 현저(顯著)하였다. 16. 수확기(收穫期)의 질소(窒素), 인산(燐酸), 가리(加里), 석탄(石炭), 마그네슘, 규산(珪酸) 및 망간의 총흡수량(總吸收量)과 수량(收量)과는 고도(高度)의 정(正)의 상관관계(相關關係)가 인정(認定)되었다. 17. 수확기(收穫期)에 질소(窒素), 인산(燐酸), 가리(加里), 석탄(石炭), 마그네슘 및 규산(珪酸)의 흡수량(吸收量)과 수당입수간(穗當粒熱間)에, 질소(窒素) 및 가리(加里)의 흡수량(吸收量)과 수수(穗數)와는 유의적(有意的)인 정(正)의 상관관계(相關關係)가 성립(成立)되었다.

  • PDF

Sesquiterpenoids Bioconversion Analysis by Wood Rot Fungi

  • Lee, Su-Yeon;Ryu, Sun-Hwa;Choi, In-Gyu;Kim, Myungkil
    • 한국균학회소식:학술대회논문집
    • /
    • 한국균학회 2016년도 춘계학술대회 및 임시총회
    • /
    • pp.19-20
    • /
    • 2016
  • Sesquiterpenoids are defined as $C_{15}$ compounds derived from farnesyl pyrophosphate (FPP), and their complex structures are found in the tissue of many diverse plants (Degenhardt et al. 2009). FPP's long chain length and additional double bond enables its conversion to a huge range of mono-, di-, and tri-cyclic structures. A number of cyclic sesquiterpenes with alcohol, aldehyde, and ketone derivatives have key biological and medicinal properties (Fraga 1999). Fungi, such as the wood-rotting Polyporus brumalis, are excellent sources of pharmaceutically interesting natural products such as sesquiterpenoids. In this study, we investigated the biosynthesis of P. brumalis sesquiterpenoids on modified medium. Fungal suspensions of 11 white rot species were inoculated in modified medium containing $C_6H_{12}O_6$, $C_4H_{12}N_2O_6$, $KH_2PO_4$, $MgSO_4$, and $CaCl_2$ for 20 days. Cultivation was stopped by solvent extraction via separation of the mycelium. The metabolites were identified as follows: propionic acid (1), mevalonic acid lactone (2), ${\beta}$-eudesmane (3), and ${\beta}$-eudesmol (4), respectively (Figure 1). The main peaks of ${\beta}$-eudesmane and ${\beta}$-eudesmol, which were indicative of sesquiterpene structures, were consistently detected for 5, 7, 12, and 15 days These results demonstrated the existence of terpene metabolism in the mycelium of P. brumalis. Polyporus spp. are known to generate flavor components such as methyl 2,4-dihydroxy-3,6-dimethyl benzoate; 2-hydroxy-4-methoxy-6-methyl benzoic acid; 3-hydroxy-5-methyl phenol; and 3-methoxy-2,5-dimethyl phenol in submerged cultures (Hoffmann and Esser 1978). Drimanes of sesquiterpenes were reported as metabolites from P. arcularius and shown to exhibit antimicrobial activity against Gram-positive bacteria such as Staphylococcus aureus (Fleck et al. 1996). The main metabolites of P. brumalis, ${\beta}$-Eudesmol and ${\beta}$-eudesmane, were categorized as eudesmane-type sesquiterpene structures. The eudesmane skeleton could be biosynthesized from FPP-derived IPP, and approximately 1,000 structures have been identified in plants as essential oils. The biosynthesis of eudesmol from P. brumalis may thus be an important tool for the production of useful natural compounds as presumed from its identified potent bioactivity in plants. Essential oils comprising eudesmane-type sesquiterpenoids have been previously and extensively researched (Wu et al. 2006). ${\beta}$-Eudesmol is a well-known and important eudesmane alcohol with an anticholinergic effect in the vascular endothelium (Tsuneki et al. 2005). Additionally, recent studies demonstrated that ${\beta}$-eudesmol acts as a channel blocker for nicotinic acetylcholine receptors at the neuromuscular junction, and it can inhibit angiogenesis in vitro and in vivo by blocking the mitogen-activated protein kinase (MAPK) signaling pathway (Seo et al. 2011). Variation of nutrients was conducted to determine an optimum condition for the biosynthesis of sesquiterpenes by P. brumalis. Genes encoding terpene synthases, which are crucial to the terpene synthesis pathway, generally respond to environmental factors such as pH, temperature, and available nutrients (Hoffmeister and Keller 2007, Yu and Keller 2005). Calvo et al. described the effect of major nutrients, carbon and nitrogen, on the synthesis of secondary metabolites (Calvo et al. 2002). P. brumalis did not prefer to synthesize sesquiterpenes under all growth conditions. Results of differences in metabolites observed in P. brumalis grown in PDB and modified medium highlighted the potential effect inorganic sources such as $C_4H_{12}N_2O_6$, $KH_2PO_4$, $MgSO_4$, and $CaCl_2$ on sesquiterpene synthesis. ${\beta}$-eudesmol was apparent during cultivation except for when P. brumalis was grown on $MgSO_4$-free medium. These results demonstrated that $MgSO_4$ can specifically control the biosynthesis of ${\beta}$-eudesmol. Magnesium has been reported as a cofactor that binds to sesquiterpene synthase (Agger et al. 2008). Specifically, the $Mg^{2+}$ ions bind to two conserved metal-binding motifs. These metal ions complex to the substrate pyrophosphate, thereby promoting the ionization of the leaving groups of FPP and resulting in the generation of a highly reactive allylic cation. Effect of magnesium source on the sesquiterpene biosynthesis was also identified via analysis of the concentration of total carbohydrates. Our current study offered further insight that fungal sesquiterpene biosynthesis can be controlled by nutrients. To profile the metabolites of P. brumalis, the cultures were extracted based on the growth curve. Despite metabolites produced during mycelia growth, there was difficulty in detecting significant changes in metabolite production, especially those at low concentrations. These compounds may be of interest in understanding their synthetic mechanisms in P. brumalis. The synthesis of terpene compounds began during the growth phase at day 9. Sesquiterpene synthesis occurred after growth was complete. At day 9, drimenol, farnesol, and mevalonic lactone (or mevalonic acid lactone) were identified. Mevalonic acid lactone is the precursor of the mevalonic pathway, and particularly, it is a precursor for a number of biologically important lipids, including cholesterol hormones (Buckley et al. 2002). Farnesol is the precursor of sesquiterpenoids. Drimenol compounds, bi-cyclic-sesquiterpene alcohols, can be synthesized from trans-trans farnesol via cyclization and rearrangement (Polovinka et al. 1994). They have also been identified in the basidiomycota Lentinus lepideus as secondary metabolites. After 12 days in the growth phase, ${\beta}$-elemene caryophyllene, ${\delta}$-cadiene, and eudesmane were detected with ${\beta}$-eudesmol. The data showed the synthesis of sesquiterpene hydrocarbons with bi-cyclic structures. These compounds can be synthesized from FPP by cyclization. Cyclic terpenoids are synthesized through the formation of a carbon skeleton from linear precursors by terpene cyclase, which is followed by chemical modification by oxidation, reduction, methylation, etc. Sesquiterpene cyclase is a key branch-point enzyme that catalyzes the complex intermolecular cyclization of the linear prenyl diphosphate into cyclic hydrocarbons (Toyomasu et al. 2007). After 20 days in stationary phase, the oxygenated structures eudesmol, elemol, and caryophyllene oxide were detected. Thus, after growth, sesquiterpenes were identified. Per these results, we showed that terpene metabolism in wood-rotting fungi occurs in the stationary phase. We also showed that such metabolism can be controlled by magnesium supplementation in the growth medium. In conclusion, we identified P. brumalis as a wood-rotting fungus that can produce sesquiterpenes. To mechanistically understand eudesmane-type sesquiterpene biosynthesis in P. brumalis, further research into the genes regulating the dynamics of such biosynthesis is warranted.

  • PDF

단감(Diospyros kaki, T) 와인 제조에 관한 연구 (A Study on the Making of Sweet Persimmon (Diospyros kaki, T) Wine)

  • 조계만;이정복;강군중;서원택
    • 한국식품과학회지
    • /
    • 제38권6호
    • /
    • pp.785-792
    • /
    • 2006
  • 단감 과즙을 이용한 와인을 제조하기 위하여 효율적인 착즙 및 최적 발효조건을 검토하였다. 단감 와인의 최적 발효 조건을 위하여 효모 균주는 알코올 생성력과 방향 가장 우수한 Saccharomyces cerevisiae KCCM 12650을 선정하였다. $(NH_4)_2HPO_4$ 농도 0.5%, 당 농도 $24^{\circ}Brix$일 때 알코올 생성력이 가장 우수하였다. pH 조정은 알코올 발효에는 영향이 주지 않았으며, 몇 가지 유기산 중 tataric acid로 pH를 조정하였을 때 알코올 생성과 관능적으로 가장 우수하였다. 발효 온도가 증가할수록 대사 속도 및 알코올 생성 속도 빨라졌으나, 알코올 생성력과 향기 등을 고려할 때 $25^{\circ}C$가 가장 적당한 온도로 판단되었다. 최적의 발효 조건으로 단감 과즙을 발효하였을 때 5일 경과 시 ^{\circ}Brix$ 당도는 $10^{\circ}$, 잔당은 38g/L이었고 세포 증식은 발효시간이 2일 경과하면서 정상기에 도달하였다. 알코올 생성은 발효시간이 1일 경과하면서부터 급격히 증가하여 발효 5일에서 12.8%의 알코올이 생성되었다. 발효 경과에 따른 pH는 3.9로 초기 pH 4.0보다 약간 낮아졌다. 페놀은 749-779mg/L으로 일정하였고 갈변도 역시 발효 초기에 0.06에서 발효 종기에 0.08로 약간 증가하였다. 단감 와인의 저장 중 갈변 억제를 위하여 열처리, pH 조절 및 아황산 처리 결과 발효가 종료된 단감 와인에 아황산을 200 ppm 농도로 처리하였을 때 상당한 갈변억제 효과를 나타내었다. 적당한 산미와 향기를 부여하기 위하여 1.0%까지 오미자를 첨가한 결과 0.5%의 오미자를 첨가하였을 경우 적당한 산미 및 향기가 가장 우수하였고 알코올 생성력에도 영향이 없었다.

사업장 방류수 중 특정수질유해물질 배출 특성 연구 (Study on characteristics of specific hazardous substances in the industrial wastewater effluent)

  • 김승호;최영섭;김연희;김종민;장길식;배석진;조영관
    • 분석과학
    • /
    • 제29권3호
    • /
    • pp.114-125
    • /
    • 2016
  • 본 연구에서는 10 업종 165 개소의 폐수배출사업장을 대상으로 방류수 중 중금속, 휘발성유기화합물, CN, phenol 등 특정수질유해물질 24 종 대하여 배출특성을 조사하였다. 중금속 중 Cu는 0.008~35.420 mg/L 농도 범위를 보였으며 검출율 46.8 % (165개 중 79 개)로 전 업종에서 검출되었다. 그 외 Cd, As, Hg, Pb, Cr+6의 검출율은 0.6~1.8 %로 낮았다. CN은 1 개, phenol은 5 개 사업장에서 검출되었다. VOCs는 12 종이 검출되었고 chloroform 80.6 % (0.42~81.60 µg/L), benzene 16.4 % (1.49~3.31 µg/L), trichloroethylene 11.5 % (1.78~6.02 /L), 1,1-dichloroethylene 10.3 % (1.23~5.89 µg/L), dichloromethane 8.5 % (0.28~968.86 µg/L) 등의 순으로 검출율이 높게 나타났다. 대부분의 VOCs는 미량 검출되었으나 dichloromethane는 금속제조, 식료품제조, 세차시설 3 개 업종에서 수질배출허용기준을 초과하였다. Chloroform은 모든 업종에서 검출되었으며, 세탁시설 및 수도사업에서 평균 농도가 각각 24.88 µg/L, 53.41 µg/L로 높게 나왔다. 산업 폐수중의 난분해성인 특정수질유해물질 처리를 위해 물리·화학적인 처리방법인 활성탄 흡착, 펜턴산화, 오존처리, 광촉매 및 UV radiation 등 공법 도입이 필요할 것으로 판단된다.

($CO_2$ 분해시 $LiMn_2O_4$의 상변화 (Phase Transitions of $LiMn_2O_4$ on $CO_2$ Decomposition)

  • 권태환;양천모;박영구;조영구;임병오
    • 한국응용과학기술학회지
    • /
    • 제20권1호
    • /
    • pp.33-43
    • /
    • 2003
  • $LiMn_2O_4$ catalyst for $CO_2$ decomposition was synthesized by oxidation method for 30 min at 600$^{\circ}C$ in an electric furnace under air condition using manganese(II) nitrate $(Mn(NO_3)_2{\cdot}6H_2O)$, Lithium nitrate ($LiNO_3$) and Urea $(CO(NH_2)_2)$. The synthesized catalyst was reduced by $H_2$ at various temperatures for 3 hr. The reduction degree of the reduced catalysts were measured using the TGA. And then $CO_2$ decomposition rate was measured using the reduced catalysts. Phase-transitions of the catalysts were observed after $CO_2$ decomposition reaction at an optimal decomposition temperature. As the result of X-ray powder diffraction analysis, the synthesized catalyst was confirmed that the catalyst has the spinel structure, and also confirmed that when it was reduced by $H_2$, the phase of $LiMn_2O_4$ catalyst was transformed into $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase. After $CO_2$ decomposition reaction, it was confirmed that the peak of $LiMn_2O_4$ of spinel phase. The optimal reduction temperature of the catalyst with $H_2$ was confirmed to be 450$^{\circ}C$(maximum weight-increasing ratio 9.47%) in the case of $LiMn_2O_4$ through the TGA analysis. Decomposition rate(%) using the $LiMn_2O_4$ catalyst showed the 67%. The crystal structure of the synthesized $LiMn_2O_4$ observed with a scanning electron microscope(SEM) shows cubic form. After reduction, $LiMn_2O_4$ catalyst became condensed each other to form interface. It was confirmed that after $CO_2$ decomposition, crystal structure of $LiMn_2O_4$ catalyst showed that its particle grew up more than that of reduction. Phase-transition by reduction and $CO_2$ decomposition ; $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase at the first time of $CO_2$ decomposition appear like the same as the above contents. Phase-transition at $2{\sim}5$ time ; $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase by reduction and $LiMn_2O_4$ of spinel phase after $CO_2$ decomposition appear like the same as the first time case. The result of the TGA analysis by catalyst reduction ; The first time, weight of reduced catalyst increased by 9.47%, for 2${\sim}$5 times, weight of reduced catalyst increased by average 2.3% But, in any time, there is little difference in the decomposition ratio of $CO_2$. That is to say, at the first time, it showed 67% in $CO_2$ decomposition rate and after 5 times reaction of $CO_2$ decomposition, it showed 67% nearly the same as the first time.

금속-세라믹 Core-Shell CoAl2O4@Al 구조체를 적용한 불균일계 촉매의 글리세롤 수소전환 반응특성 (Glycerol Steam Reforming for Hydrogen Production on Metal-ceramic Core-shell CoAl2O4@Al Composite Structures)

  • 김지은;이두환
    • 청정기술
    • /
    • 제21권1호
    • /
    • pp.68-75
    • /
    • 2015
  • 본 연구에서는 높은 열전도성을 갖는 금속-세라믹 core-shell 구조의 CoAl2O4@Al 복합체를 Al 금속의 수열반응을 통하여 합성하고, 이를 Rh 촉매의 담지체로 적용하여 구조적, 촉매화학적 특성을 분석하였다. Rh/CoAl2O4@Al (3 wt% Rh) 촉매는 단순침적법(incipient wetness impregnation)으로 제조하였고, 특성의 비교평가를 위하여 공침법(co-precipitation)으로 합성한 CoAl2O4를 담지체로 하여 Rh/CoAl2O4 (3 wt% Rh) 촉매를 단순침적법으로 제조하였다. 이들 촉매들은 N2 흡착, XRD, 전자 주사현미경, temperature programmed reduction (TPR), CO 화학흡착 분석을 통해서 그 특성을 분석하였고, 글리세롤 수증기 개질 반응(550 ℃)을 통한 수소전환반응에 적용하여 촉매적 특성을 평가하고 분석하였다. 글리세롤 수증기 개질반응에 대하여 Rh/CoAl2O4@Al 촉매는 Rh/CoAl2O4 촉매에 비하여 약 2.8배 높은 글리세롤 전환 turnover frequency (TOF)를 보여주었고, 이는 높은 열전도성을 갖는 금속-세라믹 복합체를 통한 원활한 반응열의 전달에 기인한 것으로 분석되었다. CoAl2O4@Al 및 CoAl2O4 담지체에서도 환원에 의하여 노출된 일부 Co 금속에 의한 촉매적 활성이 관찰되었는데, Rh/CoAl2O4@Al과 Rh/CoAl2O4 촉매에서와 마찬가지로 core-shell 구조체인 CoAl2O4@Al이 CoAl2O4 보다 높은 촉매적 활성을 보였다. 그러나, 이들 촉매는 글리세롤 개질반응에서 비교적 높은 비활성화를 보여주었고 이는 촉매표면의 탄소침적(coking)에 기인한 것으로 판명되었다.

금속산화물 촉매상에서 플라즈마를 이용한 IPA 저감 (Plasma-assisted Catalysis for the Abatement of Isopropyl Alcohol over Metal Oxides)

  • 조진오;이상백;장동룡;박종호;목영선
    • 청정기술
    • /
    • 제20권4호
    • /
    • pp.375-382
    • /
    • 2014
  • 금속산화물이 담지된 허니컴 형상의 플라즈마-촉매 반응기를 이용하여 아이소프로필 알코올(isopropyl alcohol, IPA) 저감 및 부산물 생성 거동에 대해 조사하였다. 허니컴 형상의 다공질 세라믹 지지체(주성분: ${\alpha}-Al_2O_3$)에 금속산화물로 산화철($Fe_2O_3$) 또는 산화구리(CuO)를 담지시킨 후, 이 촉매가 동축 원통형 전극구조 내부에 위치하도록 플라즈마-촉매 반응기를 구성하였다. 플라즈마 반응에 의한 IPA 분해속도가 매우 빨랐기 때문에 IPA 분해효율 자체는 금속산화물 담지 여부 및 금속산화물 종류에 관계없이 유사한 것으로 나타났으나, 부산물 생성거동은 촉매종류에 따라 큰 차이를 보여주었다. 아세톤, 폼알데하이드, 아세트알데하이드, 메테인, 일산화탄소 등의 유해 부산물 농도는 $Fe_2O_3/{\alpha}-Al_2O_3$ < $CuO/{\alpha}-Al_2O_3$ < ${\alpha}-Al_2O_3$ 순으로 높게 나타났다. 유량 $1L\;min^{-1}$, IPA 초기농도 5,000 ppm(산소: 10%), 방전전력 47 W의 조건에서 얻어진 $CO_2$ 선택도는 ${\alpha}-Al_2O_3$, $CuO/{\alpha}-Al_2O_3$, $Fe_2O_3/{\alpha}-Al_2O_3$에 대해 각각 40, 80, 95%로서 $Fe_2O_3/{\alpha}-Al_2O_3$가 플라즈마-촉매를 이용한 IPA의 산화에 가장 효과적인 것으로 나타났다. 플라즈마를 단독으로 사용하여 휘발성유기화합물을 분해할 경우 타르형태의 생성물이 반응기에 퇴적되는 문제점이 있으나, 플라즈마-촉매 공정에서는 이러한 현상이 관찰되지 않았으며 촉매의 활성이 그대로 유지되었다.

초임계 상태에서 리포좀의 생성 및 약물봉입 (Liposome Formation and Active Ingredient Capsulation on the Supercritical Condition)

  • 문용준;차주환;김인영
    • 한국응용과학기술학회지
    • /
    • 제38권6호
    • /
    • pp.1687-1698
    • /
    • 2021
  • 이 연구는 열역학적으로 불안정한 활성성분을 안정하게 봉입하기위해 초임계 상태에서 다중층의 리포좀을 생성하고 유효성분을 봉입하는 것에 관한 것이다. 초임계 상태에서 원활하게 리포좀을 형성시키기 위하여 식물성유래의 하이드로제네이티드 포스파티딜콜린과 그 유도체, 하이드로제네이티드 수크로오스다이스테아레이트를 포함하는 혼합 계면활성제를 고순도로 합성하였다. 이것을 반응조에 이산화탄소를 주입하여 초임계상태를 만들고 교반함으로써 거대 리포좀을 생성시키고, 여기에 제니스테인(genistein)과 쿼세틴(quercetin)을 첨가하여 봉입하는 제조방법에 대하여 기술하였다. 혼합지질계면활성제(SC-Lipid Complex)의 HLB는 12.50이었으며, 아주 낮은 농도에서도 다중층의 리포좀 소포체가 형성되었다. 이 계면활성제의 외관은 엷은 황색의 페이스트로 특이취가 있었으며, 비중은 0.972이었고, 산가는 0.12로 고순도로 합성이 되었음을 알 수 있었다. SC-Lipid Complex를 사용하여 20 wt%의 카플릭/카프릭 트리글리세라이드와 트리에칠헥사노인을 사용한 유화력 실험결과 96.2 %의 유화력을 가지고 있음을 알 수 있었다. 제니스테인을 봉입한 초임계 리포좀에 대하여 투과전자현미경(Cryo-TEM)을 통해 다중층의 리포좀 소포체가 형성되었다는 것을 확인하였다. 제니스테인이 봉입된 1차 리포좀화한 입자 크기는 253.9 nm이었고, 2차 캡슐의 크기는 18.2 ㎛ 이었다. 제니스테인을 표준물질로 하여 초임계 상태 리포좀의 봉입효율은 99.5 %이었고, 일반적인 리포좀은 93.6 %의 효율을 가지는 것으로 나타났다. 또한 쿼세틴을 봉입한 항산화력 실험은 DPPH법으로 확인한 결과 초임계리포좀에서 유의성 있게 우수한 항산화력을 유지하고 있음을 알 수 있었다. 이러한 결과를 바탕으로 효과는 우수하나 열역학적으로 불안정한 원료를 유기용매를 사용하지 않고 초임계 상태에서 리포좀에 봉입하고, 고기능성의 스킨케어 화장품, 메이크업 화장품, 두피보호용 화장품 등 다양한 제형에 응용이 가능할 것으로 기대한다.

『이충무공전서』 정고본의 지질분석과 보존처리 (Material Properties and Conservation of 『Collection of Yi Chungmugong』 in Manuscript)

  • 임세연;안지윤;양민정
    • 헤리티지:역사와 과학
    • /
    • 제51권4호
    • /
    • pp.108-119
    • /
    • 2018
  • "이충무공전서" 정고본은 1795년 간행된 이충무공전서 1책에 해당하는 부분을 수기(手記)한 것으로 인쇄하기 전 초고(草稿)를 마지막으로 수정해 내용을 완전하게 한 판본으로 추정된다. 책의 형태는 오침안정법(五針眼訂法)의 선장본 형식으로 되어 있으며, 책 하단부분의 습해로 인한 얼룩, 결실, 산화 등 손상으로 보존처리가 시급하였다. 또한 과학적 조사 및 분석을 통해 지질과 섬유의 특성을 밝히고, 보존처리 과정에 반영될 수 있도록 하였다. 종이의 크기(cm), 두께(mm), 무게(g), 평량($g/m^2$), 밀도($g/cm^3$), 발 끈 간격 및 초 수($3{\times}3cm$) 측정 등 지질 조사를 실시하였다. 지질 조사 결과 조선시대 후기 왕실 발행 도서에 이용된 종이 특징을 추정할 수 있었다. 표지, 책지 등의 종이 섬유를 C염색법으로 분석한 결과 닥 인피섬유인 것으로 확인되었고, 장정된 끈은 면(棉) 재질로 확인되었다. 종이에 포함된 첨가물 유무를 확인하기 위해 SEM-EDS 분석을 실시한 결과 주성분인 탄소(C)와 산소(O) 외에 결정화 된 칼슘(Ca) 성분이 검출되었다. 본 유물은 "이충무공전서"의 정고본으로 전해지는 유일한 책으로 학술적 가치가 높으며, 정확한 시대와 발행 기관에 대한 정보가 수록되어 있어 고전적의 인쇄과정을 추측할 수 있다. 또한 본 연구를 통해 전적류 문화재의 보존 및 복원을 위한 기초자료로써 활용될 수 있을 것으로 기대한다.