• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1103-1109
• /
• 2003

Crystalline carbon nitride films have been deposited by RF reactive magnetron sputtering system with negative DC bias. The carbon nitride films deposited on various substrates showed ${\alpha}$- C$_3$N$_4$,${\beta}$-C$_3$N$_4$ and lonsdaleite structures through XRD and FTIR We can find the grain growth of hexagonal structure from SEMI photographs, which is coincident with the theoretical carbon nitride unit cell. When nitrogen gas ratio is 70 % and RF power is 200 W, the growth rate of carbon nitride film on quartz substrate is about 2.1 $\mu\textrm{m}$/hr.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.45.2-45.2
• /
• 2010

Possessing of carbon nanotubes in biopolymer intrigued much interest due to their mechanical and unique nanoscale surface properties. Surface stiffness can be controlled by the amount of carbon nanotubes in polymer and surface wettability can be altered by the order of nanoscale surface roughness. Protein adsorption mechanism on nanostructured carbon nanotube/polymer thin film will be discussed in this study. In addition, we identified that mechanical stimuli also contribute the messenchymal stem cell and bone cell interactions. Importantly, live cell analysis system also showed altered morphology and cellular functions. Thus, embedding of carbon nanostructures simultaneously contribute to protein adsorption and cellular interactions. In conclusion, this study demonstrated the evidence that nanoscale surface features determine the subsequent biological interactions, such as protein adsorption and cellular interactions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.473-474
• /
• 2006

Aligned carbon nanotubes(CNTs) array were synthesized using direct current plasma-enhanced chemical vapor deposition. The nickel microgrids catalyzed the growth of carbon nanotubes which take on the area of the nickel microgrids. Selective growth of areas of nanotubes was achieved by patterning the nickel film. CNTs were grown on the pretreated substrates at 30% $C_2H_2:NH_3$ flow ratios for 10min. Carbon nanotubes with diameters about 20 nanometers and lengths approximately 720 nanometers were obtained. Morphologies of carbon nanotubes were observed by FE-SEM and TEM.

• 한국환경과학회지
• /
• 제17권11호
• /
• pp.1235-1241
• /
• 2008

Membrane separation is extensively used for water/wastewater treatment because of its efficiency separation processes. However, particles in the feed water can deposit and accumulate on the membrane surface to created cake layer. As a consequence, the selectivity of the membrane and flux through the membrane are decreased, which is called fouling/blocking phenomenon. In order to solve fouling problem, we developed a novel membrane named Carbon Whisker Membrane (CWM) which contains vapor-grown carbon fibers/whiskers on the surface of the membrane and a layer of carbon film coated on the ceramic substrate. We firstly employed polymethyl methacrylate (PMMA) as a testing material to investigate the fouling mechanism. The results suggested that Carbon Whiskers on the surface of the membrane can prevent the directly contact between the membrane body and particles so that the fouling/blocking could not occurred easily compared to the membrane without carbon whiskers. We also researched the relationship with the diameter, density of carbon whisker on the membrane surface and total flux of solutions. Finally, we will be able to control the diameter and density of carbon whiskers on the membrane and existence of carbon whiskers on the membrane, it is important factor, might be prevent fouling/blocking in the water treatment.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.405-411
• /
• 2015

Carbon composites for flexible fiber heating element were examined to improve the electrical conductivity in this study. Carbon composites using carbon black, denka black, super-c, super-p with/without CNF or dispersant such as BCS03 and Sikament-nn were prepared. Carbon composite slurry was coated on plane film and yarns(cotton, polyester) and the performances of prepared heating materials were investigated by checking electrical surface resistance, adhesion strength. The plane heating element using carbon black under natural drying condition($25^{\circ}C$) had better physical properties such as surface resistance(185.3 Ohm/sq) and adhesion strength(above 90%) than those of other carbon composite heating elements. From these results, polyester heating element coated by carbon black showed better electrical line resistance(33.2 kOhm/cm) than cotton heating element. Then, it was found that polyester heating element coated by carbon black with CNF(3 wt%) and BCS03(1 wt%) appeared best properties(0.604 kOhm/cm).

• 대한기계학회논문집B
• /
• 제36권5호
• /
• pp.517-521
• /
• 2012

탄소나노튜브는 유연 전도체로서 투명전극, 유연 히터, 투명 스피커 분야에 활발히 응용되고 있다. 본 연구에서는 PET 유연 모재의 전면적에 다중벽 탄소나노튜브(MWCNT)를 도포하는 스프레이법 이용하여, 투명하고 전도성 있는 MWCNT/PET 복합 박막을 제조하였다. 분산제로 사용된 SDS (sodium dodecyl sulfate)의 농도를 조절함으로써 MWCNT 의 분산도를 조절하였으며, 분산도가 조절된 시험편의 인장실험을 통해 기계적인 변형 하에서 MWCNT/PET 전도성 박막의 전기-기계적인 거동과 분산제의 효과를 평가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.135-135
• /
• 1999

It is well known that Raman spectroscopy is powerful tool in analysis of sp3/sp3 bonding fraction in diamond-like carbon(DLC) films. Raman spectra of DLC film is composed of D-peak centered at 1350cm-1 and G-peak centered at 1530cm-1. The sp3/sp3 fraction is qualitatively acquired by deconvolution method. However, in case of DLC film, it is generally observed that G-peak position shifts toward low wavenumber as th sp3 fraction increases. However, opposite results were frequently observed in ta-C films. ta-C film has much higher residual compressive stress due to its high sp3 fraction compared to the DLC films deposited by CVD method. Effect of residual stress on G-peak position is most recommendable parameter in Raman analysis of ta-C, due to its smallest fitting error among many parameters acquired by peak deconvolution of symmetric spectra. In current study, the effect of residual stress on Raman spectra was quantitatively evaluated by free-hang method. ta-C films of different residual stress were deposited on Si-wafer by modifying DC-bias voltage during deposition. The variation of the G-peak position along the etching depth were observed in the free-hangs of 20~30${\mu}{\textrm}{m}$ etching depth. Mathematical result based on Airy stress function, was compared with experimental results. The more reliable analysis excluding stress-induced shift was possible by elimination of the Raman shift due to residual compressiove stress.

• 한국진공학회지
• /
• 제13권4호
• /
• pp.175-181
• /
• 2004

미소인장시험을 통해 304 스테인리스 스틸 판재 위에 증착된 DLC 박막의 안정성을 평가하였다. 모재의 소성 변형과 함께 코팅 층의 손상이 발생하기 시작하는데, 작은 규모의 모재 변형 시에는 인장축의 수직방향으로 박막의 균열이 발생하지만, 모재의 슬립변형이 발생하기 시작하면 인장 축과 $45^{\circ}C$의 각도를 갖는 슬립 면을 따라 필름의 박리가 발생하였다. DLC박막의 박리면적으로부터 필름의 접착력을 평가할 수 있었으며, 필름의 합성 전에 실시하는 Ar 플라즈마 스퍼터링 세척시간이 길수록 그리고 세척시 기판에 인가되는 전압이 높을수록 필름의 접착력은 향상되었다. 이러한 변화는 스테인리스 스틸 모재와 Si 접합 층간의 계면특성이 향상되면, 필름의 전체 접착력을 증진시킬 수 있음을 보여주고 있다.

• 한국재료학회지
• /
• 제10권8호
• /
• pp.575-580
• /
• 2000

Ta(TaC) 필라멘트를 이용한 HF-CVD 법에 의하여 $Si_3N_4$, SiC, WC, $Al_2O_3$를 기판으로 다이아몬드 박막을 증착하고, 그 밀착특성을 평가하였다. 로내의 $CH_4$농도를 10%로 높게 하였을 경우에는 막중에 graphitic(amorphous) carbon이 생성됨을 확인할 수 있었다. 박막을 $12\mu\textrm{m}$ 정도까지 두껍게 하면, WC기판에서는 부분적 박리형상이 관찰되었으나, $Si_3N_4$를 기판으로 하였을 경우에는 안정한 박막을 얻을 수 있었다. Indentation test 결과로부터 grainding에 의한 기판표 처리가 밀착성 향상에 효과적이라는 것을 알 수 있었다. 또 compression topple test에서는 박막의 두께는 밀착성과 반비례의 관계를 가지는 것을 알 수 있었다. 수 있었다.

• 폴리머
• /
• 제32권1호
• /
• pp.38-42
• /
• 2008

메탄, 아세틸렌, hexamethyldisiloxane(HMDSO) 및 HMDSO+산소를 플라스마 중합시켜 식품포장용으로 사용되고 있는 저밀도 폴리에틸렌(LDPE) 필름의 표면에 얇은 박막을 코팅하여 LDPE 필름의 차단성을 향상시키고자 하였다. 산소에 대한 차단성은 HMDSO+산소(유량 : 0.6+9.0 SCCM) 플라스마로 40 W에서 10분간 코팅할 경우 가장 크게 향상되어 산소 투과도가 18.6배까지 감소되었으며, 이산화탄소와 수분에 대한 차단성은 아세틸렌(유량 : 0.75 SCCM) 플라스마로 10 W에서 10분간 코팅할 경우 가장 크게 향상되어 이산화탄소와 수분 투과도가 각각 12.0배와 3.0배까지 감소되었다. 또한, 이렇게 코팅된 필름을 사용하여 방울토마토, 오이, 팽이버섯 등을 포장할 경우, 신선도 유지기간이 코팅 전에 비하여 $1.5{\sim}3.0$배까지 연장되었다.