• 한국지진공학회논문집
• /
• 제8권2호
• /
• pp.73-81
• /
• 2004

본 연구에서는 기존 철근콘크리트건물 보-기둥 접합부의 내진 성능을 개선하기 위하여 탄소섬유를 사용하여 구조물을 보강한 후 실험을 수행하였다. 이를 위하여 6개의 철근콘크리트 보-기둥 접합부를 제작하였으며, 지진하중과 같은 반복하중이 작용할 때 보강재료 및 보강영역 등을 변수로 하여 실험을 수행하여 각 보강변수에 따른 보강효과를 평가하였다. 본 실험을 통하여 구조물의 내진 성능 및 연성능력을 증진시킬 목적으로 새로운 보강재료(탄소섬유판, 탄소섬유봉, 탄소섬유쉬트)로 설계된 보강 실험체(RPC-CP2, RPC-CR, RJC-CP, RJC-CR)들은 내력증진은 물론이고 안정적인 이력거동을 확보할 수 있었다.

• Composites Research
• /
• 제28권4호
• /
• pp.168-175
• /
• 2015

탄소섬유 강화 복합재료는 높은 비강도 및 비강성을 가지기 때문에 자동차 산업, 선박, 우주 항공 산업과 같은 다양한 산업 분야에 적용되어 왔으며, 수요가 점차 증가하고 있다. 탄소섬유 강화 복합재료에는 기지재로 주로 에폭시(Epoxy)와 같이 점도가 낮고 젖음 특성이 우수하며 강도가 양호한 열경화성(Thermosetting) 수지가 사용된다. 열경화성 수지는 우수한 물리적 특성을 나타내지만 재사용이 어렵다. 이러한 문제를 해결하기 위하여 재사용이 가능한 탄소섬유 강화 열가소성 수지(Thermoplastic) 복합재료 개발 및 탄소섬유 재사용에 관한 많은 연구들이 진행되고 있다. 본 연구에서는 열분해 방법을 사용하여 탄소섬유/에폭시 복합재료로부터 탄소섬유와 수지를 분리하여 탄소섬유를 재활용하였다. 에폭시의 분해도(Degree of decomposition)는 열중량분석기(TGA)와 시차 주사현미경(SEM)을 통해 확인하였다. 수지로부터 분리해낸 탄소섬유는 절단(Cutting)과 그라인딩(Grinding) 방법을 거쳐 탄소섬유 복합재료 시트(Sheet)를 제조하였다. 재활용 탄소 섬유로 제조된 탄소섬유 시트는 각각 다른 냉각조건에서 결정화 엔탈피(Crystallization enthalpy)와 기계적 특성, 표면과 단면의 형태를 분석하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권5호
• /
• pp.10-21
• /
• 2015

콘크리트 구조물의 내력성능을 향상시키기 위해 탄소섬유쉬트(Carbon Fiber-Reinforced Plastic Sheet, 이하 CFRP sheet)로 보강된 콘크리트에 대해 많은 연구가 수행되어 왔다. 본 연구는 CFRP sheet로 구속된 콘크리트에 대한 연구 중 미비한 부분을 보완하기 위하여 보강겹수, 시험체의 크기, 형상비, 겹이음길이를 변수로 하여 연구를 수행하였다. 각 시험체별 응력-변형률 곡선을 통해 콘크리트의 거동을 비교하였으며, 최대압축강도를 통하여 CFRP sheet의 보강효과를 확인하였다. 보강겹수의 증가에 따라 콘크리트의 압축성능은 크게 개선되었으며, 시험체의 크기와 형상비의 변화를 통해 이론적인 부분을 검증하였고, 겹이음길이는 둘레의 5%이상으로 해야만 보강효과에 영향이 없는 것으로 확인하였다. 또한 본 연구의 시험결과와 기존 시험결과를 정리하고 이를 기준으로 기존 강도추정모델을 통계 분석함으로 모델의 정확성과 신뢰성을 검증하였다.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.241-245
• /
• 2012

In this study, one type of circular shaped composite tube was used, combined with reinforcing foam and without foam. Furthermore, CFRP (Carbon Fiber Reinforced Plastic) circular member manufactured from CFRP prepreg sheet for lightweight design. CFRP is an anisotropic material which is the most widely adapted lightweight structural member. The crashworthy behavior of circular composite material tubes subjected to static axial compression under same conditions is reported in this paper. The collapse mode during the failure process were observed and analyzed. The behavior of polymeric foams to the tubes crashworthiness were also investigated.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권6호
• /
• pp.183-190
• /
• 2006

본 연구는 철근콘크리트 보에 대해 선가력 후 보강재료별로 보강 효과를 파악하기 위하여 휨 실험한 결과, 다음과 같은 결론을 얻었다. 실험결과, CB 보강 실험체가 콘크리트 내부에 매입되어 일체 거동함으로써 휨내력 향상 및 연성능력 면에서 가장 우수한 것으로 나타났으며, 섬유계 보강재인 CFS와 GFS 보강 실험체 또한 우수한 내력을 가지는 것으로 나타났다. GSP 보강실험체의 경우 다른 보강 실험체에 비해 보강재 자체의 내력은 큰데 반해 콘크리트와 부착성이 떨어져 상대적으로 낮은 보강효과를 보였으며 실제 구조체에서는 콘크리트와 부착성이 개선 되어 보다 큰 보강효과를 발휘할 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.491-496
• /
• 2001

In recent years, the research and development about the new material proceed rapidly and actively in the building industry. As building structures become bigger, higher and more specialized, so does the demand for material with higher strength. In the future, we will need to research repair and rehabilitation to make high strength concrete mixed steel fibrous building safe. The carbon fiber reinforced plastic bonding method is widely used in reinforcing the existing concrete structure among the various methods. The repair of initiate loaded reinforced high-strength concrete beams mixed steel fibrous with epoxy bonded Carbon Fiber Sheets(CFS) was investigated experimentally. The CFS thickness and length were varied to assess the peel failure at the curtailment of CFS, The behaviour of the repaired beams was represented by load-longitudinal steel strain relation and failure modes were discussed. The test results indicate that CFS is very effective for strengthening the demand beams and controlling deflections of reinforced high strength concrete beams mixed steel fibrous happen diagonal crack, the increase in the number of CFS layers over two layers didn't effect the increase in the strength of beams.

• Structural Monitoring and Maintenance
• /
• 제9권1호
• /
• pp.29-42
• /
• 2022

In mountainous areas of China, concrete poles with connectors are widely employed in power transmission due to its convenience of manufacture and transportation. The bearing capacity of the poles must have degenerated over time, and most of the steel connectors have been corroded. Carbon fiber reinforced polymer (CFRP) offers a durable, light-weight alternative in strengthening those poles that have served for many years. In this paper, the bearing capacity and failure mechanism of CFRP sheet strengthened existing reinforced concrete poles with corrosion steel connectors were investigated. Four poles were selected to conduct flexural capacity test. Two poles were strengthened by single-layer longitudinal CFRP sheet, one pole was strengthened by double-layer longitudinal CFRP sheets and the last specimen was not strengthened. Results indicate that the failure is mainly bond failure between concrete and the external CFRP sheet, and the specimens fail in a brittle pattern. The cross-sectional strains of specimens approximately follow the plane section assumption in the early stage of loading, but the strain in the tensile zone no longer conforms to this assumption when the load approaches the failure load. Also, bearing capacity and stiffness of the strengthened specimens are much larger than those without CFRP sheet. The bearing capacity, initial stiffness and elastic-plastic stiffness of specimen strengthened by double-layer CFRP are larger than those strengthened by single-layer CFRP. Weighting the cost-effective effect, it is more economical and reasonable to strengthen with single-layer CFRP sheet. The results can provide a reference to the same type of poles for strengthening design.

• Structural Engineering and Mechanics
• /
• 제18권1호
• /
• pp.21-40
• /
• 2004

In this paper, we modify the L-L model (Li et al. 2003) and extend the application of this model to concrete confined by both steel reinforcement and CFRP. Thirty-six concrete cylinders with a dimension of ${\varphi}30{\times}60$ cm were tested to verify the effectiveness of the proposed model. The experimental test results show that different types of steel reinforcement have a great effect on the compressive strength of concrete cylinders confined by steel reinforcement, but the different types of steel reinforcement have very little effect on concrete cylinders confined by both steel reinforcement and CFRP. Compared with the stress-strain curves of confined concrete cylinders, we can conclude that the proposed model can provide more effective prediction than others models.

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.1-6
• /
• 2022

As environmental regulations are strengthened, automobile manufacturers continuously research lightweight structures based on carbon fiber reinforced plastic (CFRP). However, it is difficult to see the effect of strength reinforcement when using a single CFRP material. To improve this, a hybrid laminate in which CFRP is mixed with the existing body structural steel was proposed. In this paper, CFRP patch reinforcement is applied to each compression/tensile action surface of a 22MnB5 metal sheet, and it was evaluated through a 3-point bending experiment. Progressive failure was observed in similar deflection on bending deformation to each one-sided reinforced specimen. After progressive failure, the tensile reinforced specimen was confirmed to separate the damaged CFRP patch and 22MnB5 sheet from the center of the flexure. The compression reinforced specimen didn't separate that CFRP patch and 22MnB5, and the strength reinforcement behavior was confirmed. In the compression reinforced specimen, damaged CFRP patches were observed at the center of flexure during bending deformation. As a result of checking the specimen of the compression reinforcement specimen with an optical microscope, It is confirmed that the damaged CFRP patch and the reinforced CFRP patch overlapped, resulting in a concentrated load. Through the experimental results, the 22MnB5 strength reinforcement characteristics according to the reinforcement position of the CFRP patch were confirmed.

• Carbon letters
• /
• 제21권
• /
• pp.23-32
• /
• 2017

A drop weight impact test was conducted in this study to analyze the mechanical and thermal properties caused by the changes in the ratio of carbon fiber reinforced plastic (CFRP) to ethylene vinyl acetate (EVA) laminations. The ratios of CFRP to EVA were changed from 10:0 (pure CFRP) to 9:1, 8:2, 6:4, and 5:5 by manufacturing five different types of samples, and at the same time, the mechanical/thermal properties were analyzed with thermo-graphic images. As the ratio of the CFRP lamination was increased, in which the energy absorbance is dispersed by the fibers, it was more likely for the brittle failure mode to occur. In the cases of Type 3 through Type 5, in which the role of the EVA sheet is more prominent because it absorbs the impact energy rather than dispersing it, a clear form of puncture failure mode was observed. Based on the above results, it was found that all the observation values decreased as the EVA lamination increased compared with the CFRP lamination. The EVA lamination was thus found to have a very important role in reducing the impact. However, the strain and temperature were inversely propositional.