• Bulletin of the Korean Chemical Society
• /
• 제18권6호
• /
• pp.584-588
• /
• 1997

A new device to accurately deliver small amount of modifier into supercritical carbon dioxide fluid is described. Carbon dioxide, the most widely used mobile phase in supercritical fluid chromatography, is a relatively non-polar fluid, and hence the addition of small amount of polar modifiers could be necessary to migrate polar solutes. In this work, supercritical CO₂and modifier are delivered from the pump to a 100 μL mixing chamber in which a small magnetic bar is rotating. After passing through the mixing chamber, supercritical CO₂is changed to a new mobile phase with different polarity. The amount of modifier added into supercritical CO₂is measured by an amperometric microsensor, which is prepared from a thin film of perfluorosulfonate ionomer.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 춘계학술논문집 1부
• /
• pp.489-492
• /
• 2011

Supercritical fluid technology has been an alternative for purification and separation of biological compounds in cosmetic, food, and pharmaceutical products. Solubility information of biological compounds in supercritical fluids is essential for choosing a supercritical fluid processes. The equilibrium solubility of hinokitiol was measured in supercritical carbon dioxide with a static method in the pressure range from 8 to 40 MPa and at temperatures equal to 313.2, 323.2 and 333.2 K. The experimental data were correlated well by Peng.Robinson equation of state and quasi-chemical nonrandom lattice fluid model.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.63-65
• /
• 2008

The increased interest in reducing the environmental effects caused by releasing organic compounds and aqueous waste has motivated the development of polymeric materials in supercritical fluids. Recently, supercritical fluids have been used in material synthesis and processing because of their special properties, such as high diffusivity, low viscosity, and low surface tension. Supercritical carbon dioxide is the most attractive because it is non-toxic, non-flammable, and has moderate critical temperature and critical pressure values. Supercritical carbon dioxide can also swell most polymers. In this study, we prepared polymer/clay nanocomposites using supercritical fluids. Cloisites 10A, 15A, 25A, and 30B used in this study are montmorillonites modified with a quaternary ammonium salt. The nanocomposites of polymer/clay were characterized by X-ray diffraction, thermogravimetric analysis, and differential scanning calorimetry.

• 한국수소및신에너지학회논문집
• /
• 제30권4호
• /
• pp.297-302
• /
• 2019

In this paper, the power generation efficiency increase has been studied for a Rankine cycle using both supercritical carbon dioxide as a working fluid and LNG as a coolant with PRO/II with PROVISION release 10.0 from Aveva company. Peng-Robinson equation of the state model with Twu's alpha function was selected for the modeling of the power generation cycle using LNG cold heat. Power generation efficiency was increased from 24.82% to 57.76% when using LNG as a coolant for supercritical carbon dioxide power generation cycle.

• 대한화장품학회지
• /
• 제34권3호
• /
• pp.209-215
• /
• 2008

화장품, 의약품에서 항비듬제로 널리 사용되는 요도프로피닐 부틸카바메이트와 클림바졸을 초임계 유체를 이용하여 미세입자를 제조하였다. 초임계 유체로는 임계온도와 임계압력이 상대적으로 낮은 이산화탄소가 사용되었다. 초임계 이산탄소에 용해력이 있는 요도프로피닐 부틸카마메이트와 클림바졸을 항비듬제로 선택되었다. 초임계 용액 급속팽창법을 이용하여 압력과 온도를 변화시켜 입자크기와 형상에 미치는 영향을 분석하였다.

• 한국응용과학기술학회지
• /
• 제31권1호
• /
• pp.143-150
• /
• 2014

최근 낮은 표면장력, 높은 확산계수, 가스와 같은 낮은 점도, 그리고 액체와 유사한 밀도를 갖는 초임계 유체의 장점을 이용하여 여러 가지 물질의 합성이나 응용 공정에 초임계 유체를 이용하고 있다. 초임계 유체를 이용하여 복합체 제조 시 기존의 용융공정에 비해서 분자들의 움직임이 활발하게 이루어 질 수 있어서 물성의 향상을 기대할 수 있다. 또한 클레이가 고농도로 함유된 마스터 배치를 쉽게 제조할 수 있으며, 기존의 유기 용매를 사용하여 복합체를 제조할 때보다 잔존 용매를 쉽게 제거할 수 있다는 장점을 가지고 있다. 따라서 본 연구에서는 이러한 초임계 이산화탄소를 이용하여 폴리에틸렌옥사이드/클레이 나노복합체를 제조하였다. 또한 본 연구의 목적은 초임계 상태에서 분자들의 활발한 움직임을 기대할 수 있으므로 고분자가 용해되고 클레이 층상으로 효과적으로 삽입되어 복합체의 열적 특성 및 다른 여러 가지 물성을 증가시키는 데 있다. 복합체 제조 후 XRD, TGA, 그리고 DSC를 이용하여 복합체의 특성을 분석 했다. 그 결과 용융방법으로 제조한 복합체보다 열 안정성이 향상되었으며, 클레이 층상 거리도 더 많이 벌어짐을 확인할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3540-3550
• /
• 2022

The supercritical carbon dioxide (S-CO₂) Brayton cycle is an important energy conversion technology for the fourth generation of nuclear energy. Since the printed circuit heat exchanger (PCHE) used in the S-CO₂ Brayton cycle has narrow channels, Rayleigh-Bénard (RB) convection is likely to exist in the tiny channels. However, there are very few studies on RB convection in supercritical fluids. Current research on RB convection mainly focuses on conventional fluids such as water and air that meet the Boussinesq assumption. It is necessary to study non-Boussinesq fluids. PRB convection refers to RB convection that is affected by horizontal incoming flow. In this paper, the computational fluid dynamics simulation method is used to study the PRB convection phenomenon of non-Boussinesq fluid-supercritical carbon dioxide. The result shows that the inlet Reynolds number (Re) of the horizontal incoming flow significantly affects the PRB convection. When the inlet Re remains unchanged, with the increase of Rayleigh number (Ra), the steady-state convective pattern of the fluid layer is shown in order: horizontal flow, local traveling wave, traveling wave convection. If Ra remains unchanged, as the inlet Re increases, three convection patterns of traveling wave convection, local traveling wave, and horizontal flow will appear in sequence. To characterize the relationship between traveling wave convection and horizontal incoming flow, this paper proposes the relationship between critical Reynolds number and relative Rayleigh number (r).

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권2호
• /
• pp.85-88
• /
• 2002

A study was carried out on the application of supercritical fluid to the hydrolysis of boll fibers of cotton (cultivar Tashkent-6 of Gossypium hirsutum L.) by cellulase enzymes from Trichoderma viride, Trichoderma reesei and Aspergillus niger. Conditions of the enzymatic process were optimized. The stabilities of cellulase enzymes were sustained at the pressure of up to 160 attn for 48 hours at 5$0^{\circ}C$ in supercritical carbon dioxide.

• KSBB Journal
• /
• 제14권5호
• /
• pp.633-637
• /
• 1999

초임계 유체 이산화탄소를 이용하여 그 온도와 밀도가 물고기 기름의 구성성분인 각종 지방산 에스터의 분배계수에 미치는 영향을 규명하였다. 각 지방산 에스터의 분배계수는 초임계 유체의 온도와 밀도에 따라서 상당한 차이를 나타내어 이산화탄소유체에 의한 지방산의 초임계 유체 추출분리 가능성을 확인할 수 있었다. 각 지방산의 분배계수 차이가 크게 나타나는 초임계 유체의 밀도는 0.3 g/mL 내지 0.4 /mL사이의 범위에 분포되어 있었다. 또한 각 지방산은 모두 초임계 유체의 밀도가 낮은 쪽보다 높은 쪽에서 온도에 따른 역행응축현상을 나타내었다.

• 한국염색가공학회지
• /
• 제31권1호
• /
• pp.25-32
• /
• 2019

The influence of the contact amount of carbon dioxide per unit mass of dyestuff(${\alpha}$) on dyeing uniformity in supercritical fluid dyeing is analyzed in this study. The experiments using a 5L class Pilot Scale dyeing machine is carried out for this study purpose. For a fixed temperature and pressure, the amount of sample and the dyeing leveling time were considered as process variables. The results show that the increase in the amount of the sample causes a higher color difference than the reference sample, and it also increases the amount of residual dye. On the other hand, the color difference tended to decrease with the increase in dyeing time. Based on these results, the correlation between ${\alpha}$ value and dyeing uniformity in supercritical fluid dyeing is obtained.