• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.413-420
• /
• 2008

Over the past decade, there have been significant advancement in the field of electrospinning area. This study has focused on preparing yarn using polycarbonate (PC) nanofibers including modified multi-walled carbon nanotube (mMWNT) by solution electrospinning process using the mixture of solvents consisting of tretrahydronfuran (THF) and N,N-dimethylformamide (DMF). In order to enhance the dispersion, MWNT was chemically modified. TEM analysis for the prepared PC/mMWNT nanofibers reveals that mMWNT was well-dispersed into the PC nanofiber matrix. Also with increasing contents of mMWNT, thermal stability of PC/mMWNT nanofibers was improved than that of PC nanofibers. Moreover when 3 to 5 wt% of mMWNT was added, the nanofibers showed good electrical properties expecting antistatic effect, ranging 109.1~109.5 ${\Omega}$. It was confirmed that the multi-filament fibers using PC/mMWNT had $60{\sim}100{\mu}m$ in diameter and 4~5 cm in length.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.869-875
• /
• 1989

For the evaluation of storage stability of kiwifruit, the conditions of CA storage were based on the following gas compositions; 2% oxygen and 2, 4, 6% carbon dioxide, respectively. The results obtained from the experiment were as follows; The flesh softening was considerably reduced at the storage atmospheres of 4% $CO_2$ plus 2% $O_2$, and fruit firmness of 3.0kg was marked in this CA condition after storage for 180 days. The concentration of $CO_2$ affected clearly on the respiration rate and organic acid compositions of kiwifruit during CA storage. The respiration rate at the storage condition of 6% $CO_2$ was lower than those at 2 and 4% $CO_2$. Quinic and succinic acid contents were obviously increased in the kiwifruit stored at all the CA conditions studied. In comparision of the developed amounts of off-flavor substances, ethanol and acetaldehyde, depended upon the concentration of $CO_2$ in the CA conditions, the larger amount were produced in the storage condition of higher concentration of $CO_3$. From the results mentioned above, it could be concluded that the optimum atmosphere combination for CA storage of kiwifruit was 4% $CO_2$ plus 2% $O_2$.

• KSBB Journal
• /
• v.20 no.3
• /
• pp.205-209
• /
• 2005

Studies for the commercial production of sesame oil using th supercriticl carbon dioxide were made. Characteristics of sesame oil containing one of natural antioxidant 'sesamol', which only exist at sesame seed were also studied during the supercritical fluid extraction. Among the various factors influencing the sesamol contents in the sesame oil, the roasting time and temperature were checked, because sesamol can be converted from sesamol in through pyrolysis. We found that the sesamol content was increased rapidly under the condition of roasting temperature over $200^{\circ}C$ with longer roasting time. The sesamol content was increased as the temperature and pressure increased, which was caused by increase of solubility of sesamol against sesamol oil. And the sesamol content was increased also with lower speed of supercritical fluid, which increased the contact time with the raw material. The sesamol content was also increased using water increase up to $1\%$ as the entrainer. When the extraction performance with the supercritical fluid was compared to the conventional compressed extraction, the sesamol content was increased up to 11.5 times with the entrainer.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.211-215
• /
• 2015

The hydrolysis of defatted rice bran using near-critical water was performed, and the feasibility of consequent hydrolyzate as a growth medium was investigated by the cultivation of Saccharomyces cerevisiae. The near-critical water hydrolysis was carried out through a series of batch experiments, and the contents of total carbohydrates, disaccharides, and monosaccharides, total organic carbon (TOC), total nitrogen (TN), pH of products were measured. The growth rate of Saccharomyces cerevisiae was measured with optical density. The yield of total carbohydrates, TOC, and TN increased with temperature below $240^{\circ}C$, however, decreased above $240^{\circ}C$. The decrease of yields above $240^{\circ}C$ was caused by the formation of organic acids, and it agreed with the change of pH of products. The yield of glucose was a maximum at $200^{\circ}C$ and it decreased dramatically at higher temperature. The growth rate of Saccharomyces cerevisiae cultivated in the hydrolyzate was similar with that in the commercial medium under certain conditions. The growth rate was correlated with the content of glucose in hydrolyzate.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.316-325
• /
• 2003

The blends of waste-polyethylene (W-PE)/waste-ethylene vinyl acetate copolymer (W-EVA) with inorganic and phosphorous flame retardants (i.e., aluminium hydroxide, magnesium hydroxide, and so on) were prepared by melt mixing techniques at different compositions and foamed. The flame retardancy and foaming properties of the blends, limiting oxygen index (LOI), heat release rate (HRR), carbon monoxide yield (COY), total heat release (THR), effective heat of combustion (EHC), expandability and cell structure were investigated using cone calorimeter, SEM, LOI tester and polarizing microscope. When the composition ratios of the W-PE/W-EVA blends were 50/50 (w/w), and the ranges of the flame retardants contents were $175{\sim}220 phr$, we could obtain foams with the uniform and closed cell, high expandability (1900 % or more), high LOI, and low HRR values. These results depend on crosslinking and loaming conditions, a char formation and smoke suppressing effect. Aluminium hydroxide had more effect in the increase of LOI than magnesium hydroxide, while magnesium hydroxide considerably affected the decrease of HRR and COY.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.155-160
• /
• 2000

Pseudomnas sp. HJ-2 is capable of producing a rubber-elastic polyhydroxyalkanoate (PHA) consisting of 3- hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), and 3-hydroxyheptanoate (3HHp) from heptanoic acid as the sole carbon source. The polyester produced was a blend of poly(3HB-co-3HV) and poly(3HHp). Although the mixing of poly(3HHp) fraction to poly(3HB-co-3HV) resulted in a decrease of modulus, the sole fraction of poly(3HB-co-3HV) with a high molar fraction of 3HV was shown to be an elastomer with the maximum percent strain of 740%. The biomass yield and the PHA synthesis were relatively high when the initial heptanoic acid concentration was 40 mM, and were significantly decreased when the substrate concentration exceeded 50 mM. The accumulation of PHA was stimulated by deficiency of nitrogen and phosphorus in the medium. The PHA contents and its monomeric compositions were greatly affected by pH and oxygen transfer rate. At pH 7.5, poly(3HB-~0.38% 3HV) was produced from heptanoic acid and a mixture of 95% 3HHp and 5% 3HV was produced at pH 8.0. Increased conten1 of 3HHp in the polyesters with lhe increasing oxygen transfer rate by agitation speed a1 a fixed aeration rate was observed.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.634-646
• /
• 2016

In this work, modified epoxy resins which were well melted in mild solvent were synthesized and solubility assessment was carried out for synthesized epoxy resins. Bisphenol-A type, phenol novolac type and ortho-cresol novolac type epoxy resins were used and fatty acid, dodecyl phenol (DP) and toluene diisocyanate (TDI) were added for synthesis of modified epoxy resins containing fatty acid (MEFA). Composition was epoxy resin/fatty acid = 1.0/0.5 and fatty acid/DP = 0.25/0.25 by equivalent weight and twelve MEFAs were synthesized according to epoxy resins. Viscosity and solubility were measured for twelve MEFAs. As a result, solubility of MEFA was excellent for mild solvent according to increasement of contents of benzene ring, glycidyl group and carbon number of alkyl group. And physical properties were measured for each coating of paints after preparing transparent paints of MEFA to melt well in mild solvent among twelve MEFAs. As a result, they showed an optimal performance on conditions of equivalent ratio of bisphenol-A type epoxy resin/fatty acid/DP/TDI; 1.0/0.25/0.25/0.5 and equivalent ratio of phenol novolac type epoxy resin/fatty acid/DP; 1.0/0.25/0.25 for drying time, adhesion, hardness, impact resistance and alkali resistance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.1-10
• /
• 2011

According to the worldwide efforts to reduce greenhouse gases consequent upon climatic change, the field of road traffic is also making diverse efforts to reduce the emissions of greenhouse gases. Among these, the exhaust gases from vehicles, the so-called main culprit of the greenhouse gases will take place the more as delay and tie-up of vehicles ever take place. Accordingly, as a scheme for reducing the delay & tie-up of vehicles, it's possible to bring up the idea of supply of new facilities and management of the existing facilities; recently, a lot more focus is being put on the management of the existing facilities due to enormous amounts of construction cost. In the midst of growing concern for traffic demand management policy, it's about the time we should do research on the tollbooth metering on the expressway whose research is almost non-existent home and abroad. As a traffic demand management policy coming to happen in case of the management of pay expressway like Japan and Korea, this research analyzed the contents of tollbooth metering, its effect and its subsequent convenience. Especially as a tool for effect analysis, this research made an analysis using VISSIM-a micro-simulation tool. As the tollbooth metering promoted, as a part of green traffic promotion strategy, is expected to contribute to improvement in traffic flow and reduction in carbon emissions, etc. It seems that there needs to be continuous research work on the management plan & revitalization plan for maximization of its effect later as well.

• Korean Journal of Microbiology
• /
• v.28 no.1
• /
• pp.55-64
• /
• 1990

Cell volume and DNA contents of the fusants were similar to those of parents. Genetic stability of the fusants was increased when they were cultured on minimal medium (MM) rather than on complete medium (CM), and the fusants were stabilized by subculturing 7 generations each 7 day on MM agar. The finally selected fusants after being cultured for 6 months on CM were stable without segregation. The fusants could also form nuclein and ascospores, and show red and pink colors by the test of TTC colorization. Assimilability and fermentability of carbon sources of the fusants were similarto those of parents. The tolerance of KCl, NaCl, sodium propionate and cycloheximide showed the traits of one strain of parents. When the fusants were cultured for 72 hr and 60 hr in the medium containing 20% glucose and sucrose, respectively, the yield of ethanol for FWKS 260 was reached to 9.6 v/v% and 9.8v/v%, respectively. The sensitive strain Kyokai 7 was found to be killed entirely after cultivation of 48 hr by the killer toxin from the fusants. The recipient S 29 and Kyokai 7 were found to have neither L nor M dsRNA plasmid. However, K 52 and fusants had both L and M dsRNA plasmid of 4.7 kb and 2.5 kb, respectively. The curants treated by heat and cycloheximide did not contain M dsRNA plasmid, but had large amounts of L dsRNA plasmid of those of killer yeasts.

• Journal of Environmental Health Sciences
• /
• v.28 no.1
• /
• pp.51-65
• /
• 2002

This study was carried out to apply some basic physical and chemical treatment options including Fenton's oxidation, and to evaluate the performances and the characteristics of organic and nitrogen removal using lab-scale biological treatment system such as complete-mixing activated sludge and sequencing batch reactor(SBR) processes for the treatment of leachate from a municipal waste landfill in Gyeongnam province. The results were as follows: Chemical coagulation experiments using aluminium sulfate, ferrous sulfate and ferric chloride resulted in leachate CO $D_{Cr}$ removal of 32%, 23% and 21 % with optimum reaction dose ranges of 10,000～15,000 mg/$\ell$, 1,000 mg/$\ell$ and 500～2,000 mg/$\ell$, respectively. Fenton's oxidation required the optimum conditions including pH 3.5, 6 hours of reaction time, and hydrogen peroxide and ferrous sulfate concentrations of 2,000 ～ 3,000 mg/$\ell$ each with 1:1 weight ratio to remove more than 50% of COD in the leachate containing CO $D_{Cr}$ between 2,000 ～ 3,000 mg/$\ell$. Air-stripping achieved to remove more than 97% of N $H_3$-N in the leachate in spite of requiring high cost of chemicals and extensive stripping time, and, however, zeolite treatment removing 94% of N $H_3$-N showed high selectivity to N $H^{+}$ ion and much faster removal rate than air-stripping. The result from lab-scale experiment using a complete-mixing activated sludge process showed that biological treatability tended to increase more or less as HRT increased or F/M ratio decreased, and, however, COD removal efficiency was very poor by showing only 36% at HRT of 29 days. While COD removal was achieved more during Fenton's oxidation as compared to alum treatment for the landfill leachate, the ratio of BOD/COD after Fenton's oxidation considerably increased, and the consecutive activated sludge process significantly reduced organic strength to remove 50% of CO $D_{Cr}$ and 95% of BO $D_{5}$ . The SBR process was generally more capable of removing organics and nitrogen in the leachate than complete-mixing activated sludge process to achieve 74% removal of influent CO $D_{Cr}$ , 98% of BO $D_{5}$ and especially 99% of N $H_3$-N. However, organic removal rates of the SBR processes pre-treated with air-stripping and with zeolite were not much different with those without pre-treatment, and the SBR process treated with powdered activated carbon showed a little higher rate of CO $D_{Cr}$ removal than the process without any treatment. In conclusion, the biological treatment process using SBR proved to be the most applicable for the treatment of organic contents and nitrogen simultaneously and effectively in the landfill leachate.e.