• 한국산림과학회지
• /
• 제95권4호
• /
• pp.405-414
• /
• 2006

우리나라는 제2차 공약기간(2013~2017년)부터 온실가스 의무감축국에 포함될 것으로 전망된다. 본 연구에서는 향후 협상에 대비하여 현재 국제적으로 진행되고 있는 목제품 탄소계정 논의 동향 및 방법별 특정을 살펴보고, 이에 따른 국내 탄소 배출량에 미치는 영향을 분석하였다. 그 결과, 목제품 탄소계정 방법의 가장 큰 특정은 현행 IPCC 기본 접근법을 제외하고 목재 무역 규모에 따라 탄소 배출량에 큰 차이가 발생한다는 것이다. 축적변화 접근법은 국내에 존재하는 모든 목제품이 탄소축적 변화량으로 계정되기 때문에 순 목재수입국에 유리한 방법이다. 생산 접근법은 국내에서 생산된 목제품만을 대상으로 탄소축적 변화량을 평가하고 수입 목제품은 계정되지 않는다. 대기유출입 접근법은 목제품의 사용으로 인해 최종적으로 분해 연소가 발생하는 장소가 탄소 배출지로 평가되기 때문에 순 목재 수출국에 유리한 방법이다. 한편, 우리나라의 목제품 탄소축적 변화량을 추정한 결과, 2004년 현재 축적변화 접근법이 1.567 Tg C, 생산 접근법이 0.581 Tg C, 대기유출입 접근법이 -1.425 Tg C로, 순 목재수입국인 우리나라는 축적변화 접근법이 국내 탄소배출량 감소에 가장 유리한 방법인 반면, 대기유출입 접근법이 가장 불리한 방법이었다.

• 농촌계획
• /
• 제26권2호
• /
• pp.61-70
• /
• 2020

The purpose of this study is to calculate the annual carbon reduction of crops according to the carbon fixation method of agricultural land, therefore to analyze whether the economic inducement of farmers to switch from single cropping to double cropping if the amount of carbon reduction were traded on the Korea Exchange. The analysis targets were Gyeonggi Province, which was divided into four areas to compare the difference between agricultural income and carbon income by crop and cropping system. Agricultural profit was estimated by multiplying the prior data of 2012 by the change rate of the consumer price index, and carbon income was calculated through the carbon reduction for each crop and the average transaction price of KAU19 traded on the Korea Exchange. According to the analysis, the profit rate of double cropping in all areas is -110.4% to 23% compared to single cropping, when only agricultural profit is taken into account, with no economic inducement for farmers to change the cropping system. However, when carbon income is taken into account together, the profit rate of double cropping rises significantly from 122.5% to 238.9% over a single operation in all areas, resulting in an economic inducement to switch the cropping system. This research is meaningful in that farming households could raise their income by additional carbon income, and that carbon credits could be supplied at Korea Exchange to further boost the carbon emission exchange.

• Advances in nano research
• /
• 제9권2호
• /
• pp.69-82
• /
• 2020

In this paper, a new explicit analytical formula is derived for the critical buckling load of Double Walled Carbon Nanotubes (DWCNTs) embedded in Winkler elastic medium without taking into account the effects of the nonlocal parameter, which indicates the effects of the surrounding elastic matrix combined with the intertube Van der Waals (VdW) forces. Furthermore, we present a model which predicts that the critical axial buckling load embedded in Winkler, Pasternak or Kerr elastic medium under axial compression using the nonlocal Donnell shell theory, this model takes into account the effects of internal small length scale and the VdW interactions between the inner and outer nanotubes. The present model predicts that the critical axial buckling load of embedded DWCNTs is greater than that without medium under identical conditions and parameters. We can conclude that the embedded DWCNTs are less susceptible to axial buckling than those without medium.

• 환경영향평가
• /
• 제20권1호
• /
• pp.79-87
• /
• 2011

In this study, we investigated the effect of carbon sequestration and sink on the environmental impact assessment of a housing redevelopment project. Through the case study, we found that the amount of carbon sequestration and sink increased with the increase of the area of park and green space and, furthermore, the amount of carbon emission decreased slightly with implementation of district heating and renewable energy. Therefore, it is necessary for its land use plan to be established to minimize the amount of net carbon emission, taking account of both the amount of present carbon emission and the amount of the future carbon sink, sequestration, and emission.

• 천문학회보
• /
• 제35권1호
• /
• pp.91.1-91.1
• /
• 2010

Despite a surface dominated by carbon-based life, the bulk composition of the Earth is dramatically carbon poor when compared to the material available at formation. Bulk carbon deficiency extends into the asteroid belt representing a fossil record of the conditions under which planets are born. The initial steps of planet formation involve the growth of primitive sub-micron silicate and carbon grains in the Solar Nebula. We present a solution wherein primordial carbon grains are preferentially destroyed by oxygen atoms ignited by heating due to stellar accretion at radii < 5 AU. This solution can account for the bulk carbon deficiency in the Earth and meteorites, the compositional gradient within the asteroid belt, and for growing evidence for similar carbon deficiency in rocks surrounding other stars.

• Carbon letters
• /
• 제10권2호
• /
• pp.87-89
• /
• 2009

Carbon nanotubes, consisting of rolled graphene layer built from $sp^2$ units, have attracted the imagination of scientists as ideal macromolecules and their unusual physical and chemical properties make them useful in the fabrication of nanocomposites, nano-electronic devices and sensors etc. In this account, the current status and prospect of carbon nanotubes is described with a special emphasis on the safety issue of carbon nanotubes. Even though many challenges to be solved remain, extensive and intensive efforts in both academy and industry will clear out those problems soon and finally enable carbon nanotubes to play a key innovative material of 21st century in numerous industrial processes.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.325-332
• /
• 2005

This paper presents a study on defects in pearlite lamella structure of high carbon steel by means of finite-element method(FEM) simulation. High carbon pearlite steel wire is characterized by its nano-sized microstructure feature of alternation ferrite and cementite. FEM simulation was performed based on a suitable FE model describing the boundary conditions and the exact material behavior. Due to the lamella structure in high carbon pearlite steel wire, material plastic behavior was taken into account on deformation of ferrite and cementite. The effects of many important parameters(reduction in area, semi-die angle, lamella spacing, cementite thickness) on wire drawing process can be predicted by DEFORM-2D. It is possible to obtain the important basic data which can be guaranteed in the ductility of high carbon steel wire by using FEM simulation.

• 한국기후변화학회지
• /
• 제9권1호
• /
• pp.91-102
• /
• 2018

The Korean government submitted the Intended Nationally Determined Contributions (INDC) to UNFCCC which aims to reduce 37% greenhouse gas emission for the opportunity of developing new energy industry and industry innovation by 2030 compared with Business-As-Usual scenario taking into account its international responsibilities and hosting headquarters of Green Climate Fund (GCF) secretariat. The 37% reduction is composed of 25.7% in the domestic markets and 11.3% in the international carbon markets. To achieve the reduction target in the international carbon market mechanisms, it must use the linkage of international carbon markets and develop new renewable energy technology for CDM and ODA. Finally, it must improve carbon capture storage (CCS) technology and establish domestic CCS institutional systems as soon as possible. And, it must activate CCS information exchange for the international cooperation on UNFCCC movement.

• Coupled systems mechanics
• /
• 제1권3호
• /
• pp.269-283
• /
• 2012

In the present paper, a multilevel approach for the local nanobuckling analysis of carbon nanotube (CNT) based composite materials is proposed and described. The approach comprises four levels, all of them at nanoscale. The first level aims to propose the potential that describes the interatomic forces between carbon atoms. In the second level, molecular dynamics simulations are performed to extract the elastic properties of the CNT. The third level aims to determine the stiffness of the material that surrounds the CNT (matrix), using the annular membrane analysis. In the fourth level, finite strip analysis of the CNT elastically restrained by the matrix is performed to calculate the critical strain at which the CNT buckles locally. In order to achieve accurate results and take the CNT-matrix interaction into account, the $3^{rd}$ and $4^{th}$ steps may be repeated iteratively until convergence is achieved. The proposed multilevel approach is applied to several CNTs embedded in a cylindrical representative volume element and illustrated in detail. It shows that (i) the interaction between the CNT and the matrix should be taken into account and (ii) the buckling at nanoscale is sensitive to several types of local buckling modes.

• Computers and Concrete
• /
• 제30권3호
• /
• pp.185-196
• /
• 2022

In this paper, the dynamic characteristics of a composite cylindrical beam made of a mechanism of carbon dioxide absorption coated on the tube core are investigated based on the classical beam theory coupled with the modified couple stress theory. The composite tube structures are assumed to be uniform along the tube length, and the energy method regarding the Hamilton principle is utilized for generating the governing equations. A powerful numerical solution, the generalized differential quadrature method (GDQM), is employed to solve the differential equations. The carbon dioxide trapping mechanism is a composite consisting of a polyacrylonitrile substrate and a cross-link polydimethylsiloxane gutter layer. Methacrylate, poly (ethylene glycol), methyl ether methacrylate, and three pedant methacrylates are all taken into account as potential mechanisms for capturing carbon dioxide. The application of the present study is helpful in the design and production of microelectromechanical systems (MEMS) and the different valuable parameters, such as the length-scale parameter, rate of section change, aspect ratio, etc., are presented in detail.