• 한국진공학회지
• /
• 제17권6호
• /
• pp.576-581
• /
• 2008

각종 전자 방출원 및 디스플레이 응용분야에서 우수한 가능성을 보이고 있는 이중벽 탄소나노튜브를 Tetra Hydro Furan(THF) 열분해 방법으로 대량합성 하였다. 본 연구에서는 Fe-Mo 금속이 MgO 담지체에 담지된 촉매에 THF 를 공급하여 이중벽 탄소나노튜브를 합성하였다. 이 합성된 이중벽 탄소나노튜브는 비정질 탄소파티클이 없는 고순도로 합성되었으며, 탄소나노튜브 다발의 직경은 12 - 20 nm 로 균일하게 분포하였고, 성장 길이는 수십 마이크로미터 였다. TEM 분석 결과 이중벽 탄소나노튜브 5 - 10 가닥이 뭉쳐있는 다발 형태로 존재하였고, 합성된 이중벽 탄소나노튜브의 Raman spectrum 분석 결과 내부 직경이 0.9 - 1.5 nm, 외부 직경이 1.6 - 2.2 nm 의 직경 분포를 갖는 이중벽 구조의 탄소나노튜브가 합성되었음을 확인 할 수 있었다. 본 연구에서 사용된 THF 가 이중벽 탄소나노튜브를 합성하는데 적합한 탄소공급원임을 제시한다.

• Coupled systems mechanics
• /
• 제10권1호
• /
• pp.39-60
• /
• 2021

The present paper is concerned with the study of nonlinear ultrasonic waves in a magneto thermo (MT) elastic armchair single-walled carbon nanotube (ASWCNT) resting on polymer matrix. The analytical formulation is developed based on Eringen's nonlocal elasticity theory to account small scale effect. After developing the formal solution of the mathematical model consisting of partial differential equations, the frequency equations have been analyzed numerically by using the nonlinear foundations supported by Winkler-Pasternak model. The solution is obtained by ultrasonic wave dispersion relations. Parametric work is carried out to scrutinize the influence of the non local scaling, magneto-mechanical loadings, foundation parameters, various boundary condition and length on the dimensionless frequency of nanotube. It is noticed that the boundary conditions, nonlocal parameter, and tube geometrical parameters have significant effects on dimensionless frequency of nano tubes. The results presented in this study can provide mechanism for the study and design of the nano devices like component of nano oscillators, micro wave absorbing, nano-electron technology and nano-electro- magneto-mechanical systems (NEMMS) that make use of the wave propagation properties of armchair single-walled carbon nanotubes embedded on polymer matrix.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.226-230
• /
• 2005

본 논문에서는 MWCNT 분산도가 증가된 새로운 전도성 형상 기억 폴리우레탄을 연구하였고 전기적 특성을 검출하기 위한 실험과 작동 성능을 측정하기 위한 실험들을 수행하였다. 전이온도 이하 범위에서의 온도변화에 따른 저항변화는 거의 없었으며, 시편이 100% 신장됨에 따라 저항값도 100% 증가하였다 (비저항 300% 증가). 작동변위는 페이로드가 증가함에 따라 선형적으로 줄어들었다. 그리고, CSMPU 작동기의 보다 세부적인 특성 및 성능을 알기 위해서는 더 많은 연구와 실험이 필요하다.

• Carbon letters
• /
• 제9권4호
• /
• pp.294-297
• /
• 2008

A CNT-$TiO_2$ nano composite was prepared from titanium chloride ($TiCl_4$) via sol-gel process using multi walled carbon nano tube (MWCNT) followed by calcination at $450^{\circ}C$. Spectral analysis revealed that the formed $TiO_2$ resided on the carbon in anatase form. The effect of adsorption was investigated using aqueous solution of methylene blue and procion blue dye. The photochemical reaction of CNT-$TiO_2$ composite in aqueous suspensions was studied under UV illumination in batch process. The reaction was investigated by monitoring the discoloration of the dyes employing UV-Visible spectro-photometeric technique as a function of irradiation time. The catalyst composites were found to be efficient for the photodegradation of the dye.

• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.65-70
• /
• 2023

높은 캐리어 이동도, 큰 포화 속도, 낮은 고유 정전 용량, 유연성, 그리고 투명성을 장점으로 가진 CNTFET(Carbon NanoTube Field Effect Transistor) 10,000개 이상을 현존하는 반도체 디자인 절차와 공정 프로세서를 활용하여 하나의 반도체 칩에 집적하는데 성공하였다. 제작된 반도체 칩의 3차원 다층 구조와 다양한 CNTFET 생산 공정 연구는 기존 MOSFET과 CNTFET를 하나의 반도체 칩에 함께 사용하는 hybrid MOSFET-CNTFET 반도체 칩 제작에 대한 가능성을 보여주고 있다. 본 논문에서는 hybrid MOSFET-CNTFET을 활용한 6T binary SRAM을 디자인하는 방법에 대해 논하고자 한다. 기존 MOSFET SRAM 또는 CNTFET SRAM 디자인 방법을 활용하여 hybrid MOSFET-CNTFET SRAM을 디자인 하는 방법을 소개하고 그 성능을 기존 MOSFET SRAM 그리고 CNTFET SRAM과 비교하고자 한다.

• Advances in nano research
• /
• 제12권3호
• /
• pp.253-261
• /
• 2022

Numerical modelling of an integrated Carbon NanoTube (CNT) membrane is only achievable if probable deformations and realistic alterations from a perfect CNT membrane are taken into account. Considering the possible forms of CNTs, bending is one of the most probable deformations in these high aspect ratio nanostructures. Hence, investigation of effect associated with bent CNTs are of great interest. In the present study, molecular dynamics simulation is utilized to investigate fluid flow dynamics in deformed CNT membranes, specifically when the tube cross section is not affected. Bending in armchair (5,5) CNT was simulated using Tersoff potential, prior to flow rate investigation. Also, to study effect of inclined entry of the CNT to the membrane wall, argon flow through generated inclined CNT membranes is examined. The results show significant variation in both cases, which can be interpreted as counter-intuitive, since the cross section of the CNT was not deformed in either case. The distribution of fluid-fluid and fluid-wall interaction potential is investigated to explain the anomalous behavior of the flow rate versus bending angle.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1876-1882
• /
• 2008

Nano manipulator is used to manufacture Carbon NanoTube(CNT) tips. Using nano manipulator, operator attaches a CNT at the apex of Atomic Force Microscope(AFM) tip, which requires a mastery of mechanics and long manufacture time. Nano manipulator is installed inside a Scanning Electron Microscope(SEM) chamber to observe the operation. This paper presents a control scheme for horizontal axes of nano manipulator via processing SEM image. Edges of AFM tip and CNT are first detected, and the position information so obtained is fed to control horizontal axes of nano manipulator. That is, a visual servoing loop is realized to control the axes more precisely in nano scale.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.244-244
• /
• 2009

Carbon nanotubes (CNTs) have excellent electrical, chemical stability, mechanical and thermal properties. In this paper, networks of Multi-walled carbon nanotube (MWCNT) materials were investigated as transparent electrode. Sensor films were fabricated by air spray method using the multi-walled CNTs solution on glass substrates. The film that was sprayed with the MWCNT dispersion for 60 sec, was 300nm thick. And the electric resistivity and the light transmittance rate are $2{\times}10^2{\Omega}cm$ and 60%, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.171-171
• /
• 2011

Co and Fe doped multi-wall carbon nano-tubes (MWCNTs) synthesized by microwave plasma enhanced chemical vapor deposition (PECVD) technique are investigated with synchrotron radiations at Pohang Light Source (PAL) and European Synchrotron Radiation Facility (ESRF). Near edge x-ray absorption spectroscopy (NEXAFS) measurement at C K, Co $L_{3,2}$ and Fe $L_{3,2}$-edges, and x-ray magnetic circular dichroism (XMCD) at Co and Fe $L_{3,2}$-edges have been carried at 7B1 XAS KIST and 2A MS beamline, respectively, to understand the electronic structure and responsible magnetic interactions at room temperature. X-ray absorption spectroscopy (XAS) at C K-edge shows significant p-bonding and Co and Fe L-edges proves the presence of $Co^{2+}$ and $Fe^{2+}$ in octahedral symmetry. Co and Fe doped MWCNTs show good XMCD spectra at 300K. The effect on the magnetism is also studied through swift heavy ion (SHI) radiations and magnetism is found enhanced and change in the electronic structure in Co-CNTs is investigated.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권3호
• /
• pp.133-139
• /
• 2007

Future MEMS systems will be composed of larger varieties of devices with very different functionality such as electronics, mechanics, optics and bio-chemistry. Integration technology of heterogeneous devices must be developed. This article first deals with the current development trend of new fabrication technologies; those include self-assembling of parts over a large area, wafer-scale encapsulation by wafer-bonding, nano imprinting, and roll-to-roll printing. In the latter half of the article, the concept towards the heterogeneous integration of devices and functionality into micro/nano systems is described. The key idea is to combine the conventional top-down technologies and the novel bottom-up technologies for building nano systems. A simple example is the carbon nano tube interconnection that is grown in the via-hole of a VLSI chip. In the laboratory level, the position-specific self-assembly of nano parts on a DNA template was demonstrated through hybridization of probe DNA segments attached to the parts. Also, bio molecular motors were incorporated in a micro fluidic system and utilized as a nano actuator for transporting objects in the channel.