• 한국안전학회지
• /
• 제24권3호
• /
• pp.19-24
• /
• 2009

Currently the technique of composite material field is developed day by day. The many kinds industrial facility and life articles are coming to make with the composite material. But still the engineering works field the building and the bridge uses the material which is old era and is making. To here there is a various problem but the biggest problem the theory of the composite material is complicated too and means that the application is been delayed about constructive structure. When the composite material is used widely from constructive field, too with difficult theory in technical expert and easily with the research for the experiment data accumulation is necessary. The tensile and fatigue test of the carbon/epoxy which is a high-class composite material led from the present paper consequently and the change of the intensity coefficient which follows in repeated load researched.

• Composites Research
• /
• 제36권3호
• /
• pp.193-198
• /
• 2023

선박 경량화와 관련하여 기존 복합재료 및 3D 프린트 복합재료를 적용하는 연구가 활발히 진행되고 있다. 염수 환경에 대한 내부식성과 경량화 특성이 있는 복합재료와 우수한 생산성을 가지는 3D 프린팅 기술을 연계한 3D 프린트 복합재료의 선박 및 해양구조물 적용 가능성을 확인하기 위해 시험을 진행하였다. 본 논문에 사용된 3D 프린트 복합재료를 선박 및 해양구조물에 적용하기 위해서는 해양환경에서 노출될 수 있는 온도 환경 영향을 고려해야 한다. 따라서 해양 환경에서 노출될 수 있는 온도인 저온(-50℃), 상온(20℃), 고온(50℃) 환경에서 Carbon + Onyx, Carbon + Nylon, HSHT glass + Onyx, HSHT glass + Nylon 소재의 시편으로 인장시험을 진행하였다. 인장시험 결과, Carbon + onyx 시편이 가장 높은 인장강도를 보였고 HSHT glass + onyx 시편이 가장 높은 인장 변형률을 보였다. 또한 인장 시험 결과 시편을 분석하여 다양한 온도 환경에 노출된 3D 프린트 복합재료 시편의 파손 형상에 대해 분석하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.267-272
• /
• 2012

Considering the properties of the carbon nano tubes (CNT), their inclusion into the polymer matrix vastly increases the properties of the resultant composite. However, this is not the case due to the poor interfacial adhesion of the CNT and the polymer matrix. The present approach focuses on increasing the interaction between the polymer matrix and the CNT through the chemical modification of the CNT resulting in allyl ester functionalized carbon nanotubes (ACNT) and silane functionalized carbon nano tubes (SCNT) which are capable of reacting with the polymer matrix during the curing reaction. The addition of ACNT/SCNT into unsaturated polyester resin (UPR) resulted in the improvement of the electrical properties of resulted nanocomposites in comparison to the CNT. The surface resistivity, volume resistivity, dielectric strength, dry arc resistivity, and the comparative tracking index of the nanocomposites were significantly improved in comparison to CNT. The chemical modification of CNT was confirmed via spectroscopy.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.411-414
• /
• 2009

Photo-capacitor electrodes are attracting great attention because of their high capacitance and potential applications in electronic devices. Carbon capacitor, active carbon capacitor and its combination will be fabricated using simple sandwich capacitor electrode method as carbonaceous material on each type of capacitor electrodes with 20 ${\times}$ 15 mm cell size. Carbon/active carbon cell was fabricated using sol-gel process with 120oC dry temperature in l hour and using sintering process with 500oC in 2 hour. The effect of sintering temperature on carbon properties was also investigated with X-ray diffraction technique to get the best sintering temperature. The detail of fabrication process will be explained. Elemental composition in electrode material can be measured using quantitative spectroscopic as and a cyclic voltammetric technique was used to study the combined effects of electrode material and effect of annealing temperature and also time on the capacitance of thermally treated in capacitor electrode. In this work, characterization impedance technique is used to measurement of capacitance and giving complementary results. Active carbon as carbonaceous material has a better capacitance in charge/discharge process with mean thickness $32{\mu}m$ and with particle size $1{\mu}m$ to $4.5{\mu}m$ in 20 ${\times}$ 15 mm sample size of capacitor electrode.

• Corrosion Science and Technology
• /
• 제2권2호
• /
• pp.98-101
• /
• 2003

The Electrical Resistance Probe of carbon steel and weight loss coupons were exposed in atmosphere and in the lake water of Hanoi. The comparison of data received by two methods after one year exposure was presented. The correspondence of the data of these methods on the exposure time in both environments showed a capacity of using Electrical Resistance Probe in Vietnamese natural corrosion testing of Carbon steel.

• Composites Research
• /
• 제35권4호
• /
• pp.242-247
• /
• 2022

본 연구는 기존의 폐CFRP를 재활용하여 얻은 재생 탄소섬유를 다시 CFRP 제조에 활용하는 대신 탄소를 모재로 구성하는 탄소/탄소 (Carbon/Carbon, C/C) 복합소재를 제조하는 원료로 활용하기 위한 것이다. 먼저 일반적으로 많이 활용되는 에폭시수지 복합재료의 열분해 공정에 산화-불활성 분위기 변환 기술을 적용하여 1~2% 수준의 잔탄률을 19%까지 향상시켰으며, 이를 통해 에폭시수지 활용 C/C 복합재료 제조 가능성을 확인하였다. 다만, 산화-불활성 분위기 제어를 통한 열분해 공정으로 얻은 탄소의 경우 산소결합도가 높아 추후 개선 연구가 필요한 것으로 나타났다. 또한, 폐CFRP를 열분해 열처리 후 파쇄 및 해쇄 공정을 통해 단섬유 C/C 복합재료 시험편을 제조하였으며 이에 대한 기계적 물성 평가를 통해 최적 공정 조건을 도출하였다.

• 한국결정성장학회지
• /
• 제29권1호
• /
• pp.32-38
• /
• 2019

서비스디자인 방법론을 통해 사용 편의성에 중점을 둔 신개념의 모듈형 자전거 액세서리를 탄소 소재를 이용하여 개발하였다. 기존의 탄소 재질을 사용할 경우 자전거 주행 중 충격에 견디지 못하거나, 파손 현상이 발생하였으며, 이러한 문제점을 해결하고자 새로운 소재(S Foam Core 소재)를 적용 하였다. 기존 탄소 재질과 S Foam Core 소재의 강도, 뒤틀림 강도, 충격흡수 및 진동감쇄 측정을 하였고, S Foam Core가 적용된 제품이 기존 탄소 소재 보다 더 우수한 결과를 얻었다. 본 연구에서는 S Foam Core 소재로 프로토 타입을 제작하여, 자체 실험을 통해 검증하였고, 이를 보고하고자 한다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.319-326
• /
• 2001

The sliding wear characteristics of carbon steel castings were Investigated using a ball on disk type tester. The experiment was conducted using high carbon steel wire rods as ball material and carbon steel castings as disk material and different operating conditions, at room temperature under a lubrication and dry conditions. The results showed that the carbon steel castings appeared average wear volume Is lowed after annealing under a lubrication conditions and wear curve linear Increased. The specific wear rate of carbon steel castings Increased with wire diameter lubrication and dry also Increased 125 times In Ory. The sliding wear mechanism were Investigated due to fatigue wear lubrications and abrasive wear dries also wire Included fatigue and abrasive wear by plastic flow.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.296-300
• /
• 2002

Thin films of Hydrogenated amorphous carbon(a-C:H) are generally exhibited by high electrical resistivities from 10$^2$ to 10$\^$16/ Ω$.$cm, resulting in an interesting material for high power, high temperature MIS devices applications. The hydrogenated amorphous carbon(a-C:H) films were deposited on silicon and glass using an rf plasma enhanced CVD method. The resultant film properties were evaluated in the respect of material based on r.f. power variation. The hydrogenated amorphous carbon(a-C:H) films of thickness ranging from 30 to 50 m were deposited at the pressure of 1 ton with the mixture of methane and hydrogen. We have used rf-IR( courier transform IR) and AFM(Atomic force microscopy) for determining physical properties and current-voltage(I-V) measurement for electrical Properties.

• 한국안전학회지
• /
• 제34권2호
• /
• pp.7-14
• /
• 2019

A palladium can adsorb hydrogen and detect leaking hydrogen through changes in color and electrical resistance. This study is to evaluate the structural behavior of carbon fiber adding palladium composite materials used in the hydrogen storage vessel. A multi-scale analysis technique was used to analyze accurately the behavior of each material in relation to the microscopic composition. The multi-scale analysis is more proper and precise for composite materials because of considering the individual microscopic structure and properties of each material for composite materials. Also the crack evaluation was performed by XFEM analysis to confirm the reinforcement performance of aluminum as a liner of the hydrogen vessel. The results show that the addition of the palladium material increased the macroscopic stress, but microscopically the carbon fiber stress was reduced. It means the performance improvement of the palladium added carbon fiber/Al composite.