• Membrane Journal
• /
• v.32 no.1
• /
• pp.43-49
• /
• 2022

Solid-state supercapacitors with high safety and robust mechanical properties are attracting global attention as next-generation energy storage devices. As an electrode of a supercapacitor, an economical carbon-based electrode is widely used. However, when an aqueous electrolyte is introduced, the charge transfer resistance increases because the interfacial contact between the hydrophobic electrode surface and aqueous electrolyte is not good. In this regard, we propose a method to obtain higher electrochemical performance based on improved interfacial properties by treating the electrode surface with oxygen plasma. The surface hydrophilization induced by the enriched oxygen functionalities was confirmed by the contact angle measurement. As a result, the degree of hydrophilization was easily adjusted by controlling the power and duration of the oxygen plasma treatment. As the electrolyte of the supercapacitor, PVA/H₃PO₄, which is a typical solid-state aqueous electrolyte, was used. Free-standing membranes of PVA/H₃PO₄ electrolyte were prepared and then pressed onto the electrode. The optimal condition was to perform oxygen plasma treatment for 5 seconds with a low power of 15 W, and the energy density of the supercapacitor increased by about 8%.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.4
• /
• pp.183-189
• /
• 2024

Against the backdrop of IMO's stricter environmental regulations due to global warming, Europe's Fit for 55 plan, and other initiatives, the establishment of infrastructure for the supply of environmentally friendly marine fuels and policy analysis are more critical than ever. This study comprehensively analyzes existing research and policies on the supply of environmentally friendly marine fuels, as well as trends in regulations, industry responses, and the current status of infrastructure for the supply of environmentally friendly fuels, to draw insightful conclusions. The results show that the establishment of infrastructure for the supply of environmentally friendly fuels is as important as the introduction of environmentally friendly ships, due to the strengthening of environmental regulations. LNG is a viable option in the short term, but a transition to carbon-free fuels is necessary in the long run. In this regard, a strategic approach is needed to focus support on fuels that are advantageous to produce, considering domestic industrial conditions from a long-term perspective. Therefore, the government should actively promote infrastructure development through measures such as supporting the development and supply of environmentally friendly fuels, improving regulations and providing incentives, attracting private investment, and strengthening international cooperation. This study is expected to serve as a valuable resource for setting policy directions for the transition to an environmentally friendly maritime industry. Future research will include a comparative analysis of the economic viability of environmentally friendly fuels and basic research on the selection of fuels that are advantageous to Korea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.4
• /
• pp.291-298
• /
• 1984

The extracted hagfish (Eptatretus burgeri) flesh lipid was separated into following fractions by column chromatography on Bio-beads SX-2 and Sephadex LH-20 prior to gab chromatographic analysis of their fatty acid compositions: polar lipid, triglyceride and free fatty acid. The major fatty acids of total lipid and triglyceride in hagfish were $C_{16:0},\;C_{16:1},\;and\;C_{18:1}$. The ratio of $C_{18:0}/C_{18:1}$ in the total lipid and triglyceride of hagfish was 0.1. The polar lipid of the hagfish muscle was mainly composed of phosphatidyl choline ($65.5\%$) and phosphatidyl ethanolamine ($28.0\%$). The triglyceride obtained was fractionated into four fractions by HPLC on the basis of partition numbers. Both the fatty acid composition and triglyceride composition on the basis of the total carbon number in the acyl chains of the triglyceride were analysed by the GLC. From the information obtained on triglyceride compositions based on the total carbon number by GLC and the partition number by HPLC and fatty acid composition by GLC, the combination of fatty acid in each triglycerides was estimated. A computer was used for estimation of the fatty acid combination in the triglyceride because hagfish lipid triglyceride was composed of various kinds of fatty acids. Fortyfour kinds of triglyceride were estimated. The major triglycerides in hagfish flesh lipid were found to those of ($1{\times}C_{16:0},\;2{\times}C_{18:1};\;13.5\%$), ($1{\times}C_{16:0},\;1{\times}C_{18:0},\;1{\times}C_{18:1};\;7.2\%$), ($1{\times}C_{16:1},\;2{\times}C_{18:1};\;5.4\%$), ($2{\times}C_{16:0},\;1{\times}C_{22:5};\;5.2\%$), ($1{\times}C_{14:0},\;2{\times}C_{18:1};\;4.5\%$), ($2{\times}C_{18:1},\;1{\times}C_{22:5};\;3.6\%$), ($1{\times}C_{14:0},\;1{\times}C_{18:0},\;1{\times}C_{18:1};\;2.7\%$) and ($1{\times}C_{14:0},\;1{\times}C_{16:0},\;1{\times}C_{18:2};\;2.2\%$).

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.1
• /
• pp.55-64
• /
• 2008

A detailed understanding and appreciation of the important mechanisms operating at the soil:root interface, commonly identified as the rhizosphere, is critical for evaluating the potential for particular plant species to be successfully used as part of a phytoremediation technique. For specific plants, mechanisms may exist to overcome the inherit limitation of the phytoremediation technique when poorly mobile soil metals are of interest. In the present study, the influence of root exudates on the rhizosphere chemistry of soil and consequential metal uptake were investigated following culture of vetiver grass (Vetiveria zizanioides), recognized as a promising plant for land stabilization, in three different long-term contaminated soils and one non-contaminated control soil. The soil solution pH increased (0.3-1.1 units) following vetiver grass culture and dissolved organic carbon (DOC) also significantly increased in all soils with the highest increase in PP02 (23 to $173mg\;L^{-1}$). Chemical changes are contributed to root exudation by vetiver grass when exposed to high concentration of heavy metals. Chemical changes, consequently, influenced metal (Cd, Cu, Pb, and Zn) solubility and speciation in the rhizosphere. The highest solubility was observed for soil Ko01 (eg. 2091 and $318{\mu}g\;L^{-1}$ for Cd and Pb, respectively). Initial heavy metal solubility in soils varied with soil and either increased or decreased following vetiver grass culture depending on the soil type. An increase in pH following plant culture generally resulted in a decrease in metal solubility, while elevated DOC due to root exudation resulted in an increase in metal solubility via the formation of metal-DOC complexes. Donnan speciation demonstrated a significant decrease in free Cd and Zn in the rhizosphere and the concentration of Cd, Pb, and Zn in vetiver grass shoot was highly correlated with soluble concentration rather than total soil metal concentration.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.307-313
• /
• 2010

One-dimensional cubic phase silicon carbide nanowires (${\beta}$-SiC NWs) were efficiently synthesized by thermal chemical vapor deposition (TCVD) with mixtures containing Si powders and nickel chloride hexahydrate $(NiCl_2{\cdot}6H_2O)$ in an alumina boat with a carbon source of methane $(CH_4)$ gas. SEM images are shown that the growth temperature (T) of $1,300^{\circ}C$ is not enough to synthesize the SiC NWs owing to insufficient thermal energy for melting down a Si powder and decomposing the methane gas. However, the SiC NWs could be synthesized at T>$1,300^{\circ}C$ and the most efficient temperature for growth of SiC NWs is T=$1,400^{\circ}C$. The synthesized SiC NWs have the diameter with an average range between 50~150 nm. Raman spectra clearly revealed that the synthesized SiC NWs are forming of a cubic phase (${\beta}$-SiC). Two distinct peaks at 795 and $970 cm^{-1}$ in Raman spectra of the synthesized SiC NWs at T=$1,400^{\circ}C$ represent the TO and LO mode of the bulk ${\beta}$-SiC, respectively. XRD spectra are also supported to the Raman spectra resulting in the strongest (111) peaks at $2{\Theta}=35.7^{\circ}$, which is the (111) plane peak position of 3C-SiC. Moreover, the gas flow rate of 300 sccm for methane is the optimal condition for synthesis of a large amount of ${\beta}$-SiC NW without producing the amorphous carbon structure shown at a high methane flow rate of 800 sccm. TEM images are shown two kinds of the synthesized ${\beta}$-SiC NWs structures. One is shown the defect-free ${\beta}$-SiC NWs with a (111) interplane distance of 0.25 nm, and the other is the stacking-faulted ${\beta}$-SiC NWs. Also, TEM images exhibited that two distinct SiC NWs are uniformly covered with $SiO_2$ layer with a thickness of less 2 nm.

• Korean Journal of Microbiology
• /
• v.32 no.2
• /
• pp.155-162
• /
• 1994

Cells of Acinetobacter sp. strain JC1 DSM 3803, an aerobic monoxide-oxidizing bacterium, growing on glucose exhibited high catalase activity at the mid-exponential growth phase. The enzyme activity decreased gradually after then until the early stationary phase, increased again at the mid-stationary phase, and then decreased again thereafter. Cells growing on glucose was found to contain three kinds of catalses. Cat1, Cat2 and Cat3. The activities of Cat1 and Cat3 did change significantly during growth, but that of Cat2 exhibited significant variation. Cat3 was found to present only in cells growing on glucose, but not in cells growing on carbon monoxide of methanol. The activities of call and Cat3 in cell-free extracts were stable upon treatment with ethanol and chloroform, but decreased to some extent when the enzymewere treated with 2mM $H_2O_2$ and/or 3-amino-1,2,4-triazole (AT). Cat2 was found to be extremely sensitive to the ethanol-chloroform and $H_2O_2$ treatments, but was insensitive to the AT treatment. Cat1 exhibited enzyme activity after incubation for 1 min at 80$^{\circ}C$. Cat2 and Cat3 did not show enzyme activity after incubation for 1 min at 60$^{\circ}C$ and 70$^{\circ}C$, respectively. Cat2 was found to have peroxidase activity. Cat3 was purified to homogenity in seven steps. The molecular weight of the native enzyme was estimated to be 150,000. Sodium dodecyl sulfate-gel electrophoresis revealed two identical subunits of molecular weight 65,000. The enzyme was found to show two $K_m$ values of 39 mM and 58mM. The optimal pH for the enzyme activity was 7.0, but the activities at pH 6.0, 8.0, and 9.0, were found to be comparable to that at the optimal pH. The optimal temperature for the enzyme activity was found to be 40$^{\circ}C$. The enzyme also exhibited strong activity at 20$^{\circ}C$, 30$^{\circ}C$, and 50$^{\circ}C$. The purified enzyme was not affected by the ethanol-chloroform treatment. The enzyme, howerver, showed less than 10% of the original activity when it was treated with 12 mN AT, 0.1 mM $NaN_3$ of 1mM KCN.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.5
• /
• pp.9-16
• /
• 2019

In today's global energy market, the importance of green energy is emerging. Hydrogen energy is the future clean energy source and one of the pollution-free energy sources. In particular, the fuel cell method using hydrogen enhances the flexibility of renewable energy and enables energy storage and conversion for a long time. Therefore, it is considered to be a solution that can solve environmental problems caused by the use of fossil resources and energy problems caused by exhaustion of resources simultaneously. The purpose of this study is to efficiently produce hydrogen using plasma, and to study the optimization of DME reforming by checking the reforming reaction and yield according to temperature. The research method uses a 2.45 GHz electromagnetic plasma torch to produce hydrogen by reforming DME(Di Methyl Ether), a clean fuel. Gasification analysis was performed under low temperature conditions ($T3=1100^{\circ}C$), low temperature peroxygen conditions ($T3=1100^{\circ}C$), and high temperature conditions ($T3=1376^{\circ}C$). The low temperature gasification analysis showed that methane is generated due to unstable reforming reaction near $1100^{\circ}C$. The low temperature peroxygen gasification analysis showed less hydrogen but more carbon dioxide than the low temperature gasification analysis. Gasification analysis at high temperature indicated that methane was generated from about $1150^{\circ}C$, but it was not generated above $1200^{\circ}C$. In conclusion, the higher the temperature during the reforming reaction, the higher the proportion of hydrogen, but the higher the proportion of CO. However, it was confirmed that the problem of heat loss and reforming occurred due to the structural problem of the gasifier. In future developments, there is a need to reduce incomplete combustion by improving gasifiers to obtain high yields of hydrogen and to reduce the generation of gases such as carbon monoxide and methane. The optimization plan to produce hydrogen by steam plasma reforming of DME proposed in this study is expected to make a meaningful contribution to producing eco-friendly and renewable energy in the future.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.52-58
• /
• 2023

With the increasing awareness of the importance of carbon neutrality in response to global climate change, the utilization of hydrogen as a carbon-free fuel source is also growing. Hydrogen is commonly used in fuel cells (FC), but it can also be utilized in internal combustion engines (ICE) that are based on combustion. Particularly, ICEs that already have established infrastructure for production and supply can greatly contribute to the expansion of hydrogen energy utilization when it becomes difficult to rely solely on fuel cells or expand their infrastructure. However, a disadvantage of utilizing hydrogen through combustion is the potential generation of nitrogen oxides (NOx), which are harmful emissions formed when nitrogen in the air reacts with oxygen at high temperatures. In particular, for the EURO-7 exhaust regulation, which includes cold start operation, efforts to reduce exhaust emissions during the warm-up process are required. Therefore, in this study, the characteristics of nitrogen oxides and fuel consumption were investigated during the warm-up process of cooling water from room temperature to 88℃ using a 2-liter direct injection spark ignition (SI) engine fueled with hydrogen. One advantage of hydrogen, compared to conventional fuels like gasoline, natural gas, and liquefied petroleum gas (LPG), is its wide flammable range, which allows for sparser control of the excessive air ratio. In this study, the excessive air ratio was varied as 1.6/1.8/2.0 during the warm-up process, and the results were analyzed. The experimental results show that as the excessive air ratio becomes sparser during warm-up, the emission of nitrogen oxides per unit time decreases, and the thermal efficiency relatively increases. However, as the time required to reach the final temperature becomes longer, the cumulative emissions and fuel consumption may worsen.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.3
• /
• pp.304-313
• /
• 2006

Background : Heme oxygenase-1 (HO-1) is an inducible enzyme that catalyzes the oxidative degradation of heme to form biliverdin, carbon monoxide (CO), and free iron. The current evidence has indicated a critical role of HO-1 in cytoprotection and also in other, more diverse biological functions. It is known that the high expression of HO-1 occurs in various tumors, and that HO-1 has an important role in rapid tumor growth because of its antioxidative and antiapoptotic effects. Therefore, the role of HO-1 was analyzed in human lung cancer cell lines, and especially in the A549 cell line. Material and Methods : Human lung cancer cell lines, i.e., A549, NCI-H23, NCI-H157 and NCI-H460, were used for this study. The expression of HO-1 in the untreated state was defined by Western blotting. ZnPP, which is the specific HO inhibitor we used, and the viability of cells were tested for by conducting MTT assaysy. The HO enzymatic activity, as determined via the bilirubin level, was also indirectly measured. Moreover, the generation of intracellular hydrogen peroxide (H2O2) was monitored fluorimetrically with using a scopoletin-horse radish peroxidase (HRP) assay and 2',7'-dichlorofluorescein diacetate (DCFH-DA). We have also transfected small HO-1 interfering RNA (siRNA) into A549 cells, and the apoptotic effects were evaluated by flow cytometric analysis and Western blotting. Results : The A549 cells had a greater expression of HO-1 than the other cell lines, whereas ZnPP significantly decreased the viability of the A549 cells more than the viability of the other lung cancer cells in a dose-dependant fashion. Consistent with the viability, the HO enzymatic activity also was decreased. Moreover, intracellular H2O2 generation via ZnPP was induced in a dose-dependent manner. Apoptotic events were, then induced in the HO-1 siRNA transfected A549 cells. Conclusion : HO-1 provides new important insights into the possible molecular mechanism of the antitumor therapy in lung cancer.

• Korean Journal of Food Science and Technology
• /
• v.12 no.2
• /
• pp.97-102
• /
• 1980

Cladosporium fulvum, Aspergillus ochraceus, Aspergillus terreus and N-1 (unidentified species) were cultured on the artificial media containing sucrose as a carbon source at 20, 25 and $30^{\circ}C$ for 10 to 12 days. The lipids in the felts were extracted with chloroform-methanol mixture and the class composition and fatty acids of the lipid were determined. The summarized results are as follows 1. The average felts produced by each species per 100 ml of media were $3.82{\pm}0.30g$ for Cl. fulvum, $2.62{\pm}0.23g$ for Asp. ochraceus, $4.24{\pm}0.25g$ for Asp. terreus and $4.62{\pm}0.10g$ for N-1. Their crude fat contents $27.5{\pm}1.61%,\;50.47{\pm}1.00%,\;46.6{\pm}1.59%$ and 33.78 % and the fat coefficient 6.92, 8.88, 13.01 and 10.28, respectively. 2. The lipids produced by these species were mainly composed of triglyceride and the next free fatty acid in Cl. fulvum and N-1 and phospholipid Asp. ochraceus and Asp. terreus. 3. The major fatty acids of the lipids were in order of oleic, palmitic, linoleic and stearic acids in Asp. ochraceus, Asp. terreus and Cl. fulvum and linoleic, palmitic, oleic and stearic acid in N-1. The total percentage contents of these major fatty acids were over 98 % the former and over 95 % the latter. 4. The constituent fatty acids of the lipid were changed depending on the incubation temperature but hardly found a certain tendency except linoleic acid which was higher at lower temperature. 5. The total percentages of unsaturated fatty acids in the lipids were $50{\sim}60%$ and comparatively higher at lower incubation temperature.