• 한국수소및신에너지학회논문집
• /
• 제30권1호
• /
• pp.35-42
• /
• 2019

Recently, the gradual increase in energy acceptance is mostly satisfied by fossil fuels, but research and development of renewable energy sources are attracting attention due to fossil fuel supply and greenhouse gas problem. The disadvantage is that renewable energy can not be produced continuously. This being so, energy storage is an important technology in renewable energy. In this study, microwave was used to convert carbon receptor-carbon dioxide to gas fuel.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1480-1485
• /
• 2018

Mesoporous carbon-silica composites supported Pt nanoparticle catalysts (Pt/MCS) were firstly applied to the heterogeneous asymmetric hydrogenation of ethyl 2-oxo-4-phenylbutyrate (EOPB). A series of different silica contents were investigated in the fabrication of this mesoporous material. When the volume of added tetraethyl orthosilicate (TEOS) during the preparation of composites is 8 mL, Pt/MCS-8 holds carbon and silica as the main components and possesses relatively strong acidity, mesoporous structures with micropores, appropriate Pt nanoparticle size and high dispersibility showing by XRD, XPS, TPD, $N_2$ sorption and TEM. These properties cause its good catalytic performance in the heterogeneous asymmetric hydrogenation of EOPB with the enantiomeric excess value and conversion up to 85.6% and 97.8%, respectively.

• 신재생에너지
• /
• 제20권1호
• /
• pp.126-134
• /
• 2024

Biogas, composed mainly of methane (CH₄) and carbon dioxide (CO₂), is a renewable gas that can serve as an alternative energy source. In this study, we developed a new microwave reformer and analyzed its reforming characteristics. We observed that higher temperatures of the microwave receptor led to increased reforming efficiency. By supplying appropriate amounts of methane and steam, we could prevent carbon generated from the thermal decomposition reaction of carbon dioxide from depositing on the catalytic active layer, thus avoiding the inhibition of catalytic activity. Hydrogen generation was enhanced when maintaining the biogas ratio and steam supply at adequate levels. Increasing the SiC ratio in the receptor improved the uniformity of temperature distribution and growth rate, resulting in higher conversion rates of the reforming process.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.37-42
• /
• 2009

We are in search for many method at 21th century thinking about the environment internationally. One is among them low carbon green city. Consequently this dissertation put a system solar energy key point of low carbon green city and purpose of low carbon green city Besides system and technique about the solar energy best practices try to do the investigation analysis. It's important of low carbon green city's environmental friendly system such as solar heat system, solar power generation, ecological greening, All these systems are connected each other and organize low carbon green city. A solar energy system uses pure energy of the situation directly most among the environmental friendly system. Energy saving and environment-friendly city in the world must do not a choice. However, recognition conversion and infrastructure of the Korea still has not come true. But South Korea and the international best practices is not the same system. But plan to solar city, the concept of green city in Cheongju, Deagu local government. And many meetings are in progress.

• 한국대기환경학회지
• /
• 제29권1호
• /
• pp.97-104
• /
• 2013

Methyl alcohol is one of the basic intermediates in the chemical industry and is also being used as a fuel additive and as a clean burning fuel. In this study, conversion of carbon dioxide to methyl alcohol was investigated using catalytic chemical methods. Ceramic monoliths (M) with $400cell/in^2$ were used as catalyst supports. Monolith-supported CuO-ZnO catalysts were prepared by wash-coat method. The prepared catalysts were characterized by using ICP analysis, TEM images and XRD patterns. The catalytic activity for carbon dioxide hydrogenation to methyl alcohol was investigated using a flow-type reactor under various reaction temperature, pressure and contact time. In the preparation of monolith-supported CuO-ZnO catalysts by wash-coat method, proper concentration of precursors solution was 25.7% (w/v). The mixed crystal of CuO and ZnO was well supported on monolith. And it was known that more CuO component may be supported than ZnO component. Conversion of carbon dioxide was increased with increasing reaction temperature, but methyl alcohol selectivity was decreased. Optimum reaction temperature was about $250^{\circ}C$ under 20 atm because of the reverse water gas shift reaction. Maximum yield of methyl alcohol over CuO-ZnO/M catalyst was 5.1 mol% at $250^{\circ}C$ and 20 atm.

• 한국결정성장학회지
• /
• 제33권2호
• /
• pp.54-60
• /
• 2023

본 연구에서는 탈황석고(DG)에 이산화탄소를 반응시켜 만든 탄산화물(CCMs)의 시멘트 혼합재로서 적용 가능성 분석을 위해 탈황석고와 탄산화물의 미세구조 및 기초물성 분석을 실시하였다. 탈황석고의 경우 CaO 및 CaSO₄가, 탄산화물의 경우 CaSO₄, CaCO₃, Ca(OH)₂ 및 CaSO₄·H₂O 결정상이 주 결정상으로 나타났으며 입도분석 결과 두 재료의 평균 입자 크기의 차이는 약 7 ㎛로 나타났다. 또한 탄산화물은 폐기물공정시험기준에 따른 중금속 용출시험 결과 주요 중금속이 불검출되었으며 열중량 분석 결과 탈황석고에 비해 CO₂ 분해가 2배 이상 나타난 것으로 보아 설비 운전 조건 최적화를 통해 건설 소재 원료로 활용 가능할 것이라 판단된다. 탈황석고와 탄산화물의 함량별 강도 거동 측정 결과 탄산화물 혼입 모르타르의 장기강도가 더 높은 것으로 나타났으며 이는 탄산화물에 존재하는 CaCO₃의 충전제 효과 때문인 것으로 나타났다.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.19-24
• /
• 2010

Alloying degree is an important structural factor of PtRu catalysts for direct methanol fuel cells (DMFC). In this work, carbon supported PtRu catalysts were synthesized by reduction method using anhydrous ethanol as a solvent and $NaBH_4$ as a reducing agent. Using anhydrous ethanol as a solvent resulted in high alloying degree and good dispersion. The morphological structure and crystallanity of synthesized catalysts were characterized by X-ray diffraction (XRD), high resolution transmission electron microscope (HR-TEM). CO stripping and methanol oxidation reaction were measured. Due to high alloying degree catalyst prepared in anhydrous ethanol, exhibited low onset potential for methanol oxidation and negative peak shift of CO oxidation than commercial sample. Consequently, samples, applying ethanol as a solvent, exhibited not only enhanced CO oxidation, but also increased methanol oxidation reaction (MOR) activity compared with commercial PtRu/C (40 wt%, E-tek) and 40 wt% PtRu/C prepared in water solution.

• 한국유기농업학회지
• /
• 제16권3호
• /
• pp.287-298
• /
• 2008

우분에 왕겨와 볏짚을 1:1, 1:2, 1:3의 부피비율로 혼합한 먹이조건이 지렁이의 생육, 분립생산량, 체조직으로의 유기물 전환율 및 전환효율을 조사하여, 적정 먹이조건을 추정하였다. 1. 우분+왕겨 혼합구가 우분+볏짚 혼합구보다 지렁이의 증체속도, 증식효율 및 분립생산량이 많았다. 특히 우분+왕겨 1:3 혼합비율이 지렁이 생육에 가장 알맞은 먹이조건이었다(Table 2). 2. 우분+왕겨 혼합 구에서 지렁이 체조직으로의 유기물 전환율과 전환효율이 높았던 것은 먹이 중의 휘발성 고형분과 전탄소함량이 높았기 때문이었다(Table 1, 4). 4. 지렁이 분변토는 약알칼리성이고, 전질소함량, 유효인산함량, CEC 및 치환 성 양이온 함량이 높아서 친환경 농자재로 유용하게 활용될 수 있다고 판단된다(Table 5).

• Journal of Microbiology and Biotechnology
• /
• 제14권6호
• /
• pp.1275-1279
• /
• 2004

Citron peel oil was extracted from citron (Citrus funas) fruit by steam distillation, and was used as starting material for microbial conversion to synthesize attractive flavor compounds by using Enterobacter agglomerans 6L. E. agglomerans was isolated from citron peel and was able to metabolize the citron peel oil and grew well ($A_{600}:\;3.0$) on the citron peel oil as the sole carbon source. Multiple terpene metabolites were produced by E. agglomerans 6L on M9 salt media with citron oil vapor. The identified bioconversion products from the citron peel oil included trans-2-decenal, octanol, $\delta$­valerolactone, $\gamma$-valerolactone, cryptone, hydroxycitronellol, cuminol, and $\gamma$-dodecalactone.

• 조명전기설비학회논문지
• /
• 제26권9호
• /
• pp.18-25
• /
• 2012

Recently, the depletion of fossil fuel carbon dioxide emissions due to limitations in the internal combustion engine vehicles is rising concern about electric vehicle. Neighborhood Electric Vehicle(NEV) is maximum speed 60km/h and one day driving distances less than 80km. In this paper, Power Conversion Controller is proposed for Neighborhood Electric Vehicle. To verify the developed Power conversion Controller, Test performed integration test, max load, power density, efficiency. Confirmed that the vehicle can be applied.