• 제목/요약/키워드: Carbon Absorption

검색결과 823건 처리시간 0.027초

산화마그네슘 경화체 기반 흡착재 종류에 따른 밀도 및 흡수율 특성 (Absorption Ratio and Density Properties According to Absorbent Type Based on Magnesium Oxide Matrix)

  • 권오한;편수정;임현웅;경인수;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 춘계 학술논문 발표대회
    • /
    • pp.182-183
    • /
    • 2017
  • This research identifies radon gas absorption mechanism by adsorption materials, replacing gypsum board with radon emissions, the density and absorption rates of magnesium were carried out using vermiculite, anthracite, powdered active carbon, bentonite, illite, diatomite as a basic study on the fire resistance type of radon Gas reduction type with absorption and decomposition. As a result of the experiment, diatomite showed the lowest density, and the highestt value was the highest. For the absorption rate, bentonite showed the highest absorption rate, and the anthracite showed the lowest absorption rate.

  • PDF

A Study on FDTD Analysis and Fabrication of the Sheet-type Millimeter EM wave Absorber

  • Kim, Dae-Hun;Soo, Dong-Soo;Kim, Dong-Il
    • 한국항해항만학회지
    • /
    • 제34권4호
    • /
    • pp.299-304
    • /
    • 2010
  • In this paper, the EM wave absorber was developed for the 94-GHz detecting radar system. To analysis an EM wave absorber in millimeter wave band, we fabricated three absorber samples using carbon black and titanium dioxide and permalloy with chlorinated polyethylene. After measuring the complex relative permittivity, the absorption characteristics are simulated by 1D FDTD according to different thicknesses of less than 1.0 mm. Then, the EM wave absorber was fabricated based on the FDTD simulation. As a result, the measured results agreed well with the simulated ones, and the developed EM wave absorber with a thickness of 0.7 mm had the desired absorption characteristics of more than 14 dB in the frequency range of the 94-GHz band.

병태동물(病態動物)에서 Oxytetracycline의 생물약제학적(生物藥劑學的) 연구(硏究) (A Biopharmaceutical Study on Oxytetracycline in Pathological Animals)

  • 이진환;최준식
    • Journal of Pharmaceutical Investigation
    • /
    • 제9권2호
    • /
    • pp.1-10
    • /
    • 1979
  • The purpose of this paper was to investigate the bioavailability of oxytetracycline in pathological rats and rabbits pretreated with carbon tetrachloride and mercuric chloride. The results are as follows: The blood level of oxytetracycline administered orally was mostly decreased significantly in rabbits damaged kidney and liver, and in rabbits severely damaged kidney, the blood level of oxytetracycline was not significant at 4 to 6 hours. Urinary clearance of oxytetracycline in rabbits severely damaged kidney was inhibited at 5 to 6 hours but in rabbits damaged liver. Hepatic clearance of oxytetracycline was accelerated in rabbits damaged kidney but in rabbits damaged liver. AUC of oxytetracycline orally administered in rabbits damaged liver and kidney was largely decreased. The absorption of oxytetracycline was decreased in rats damaged liver and kidney as compared with that of normal rats. Especially, absorption of oxytetracycline in rats damaged liver was more decreased than that of rats damaged kidney. The absorption of oxytetracycline was inhibited by combinated administration of carbon tetrachloride and mercuric chloride.

  • PDF

W/O 에멀션액막에서 이산화탄소와 AMP의 화학반응 (Chemical Reaction of Carbon Dioxide with AMP in w/o Emulsion Membrane)

  • 박상욱;최병식;김성수;이재욱
    • 멤브레인
    • /
    • 제14권4호
    • /
    • pp.275-288
    • /
    • 2004
  • 본 연구에서는 준 회분식 교반조를 사용하여 polybutene (PB)와 polyisobutylene (PIB)고분자를 용해한 벤젠 용액을 연속상, 물을 불연속상으로 구성한 w/o 에멀션액막에 $CO_2$을 흡수시켜 흡수속도를 측정하였다. 점탄성을 나타내는 Deborah 수를 사용하여 점탄성 비뉴튼액체에서 구한 부피물질전달계수 ($k_La$)를 고찰하고, 수용액에 첨가한 2-amino-2-methyl-1-propanol(AMP)와 $CO_2$의 반응 메카니즘을 해석하였다.

$K_2CO_3$를 담지시킨 고체 허니컴 이산화탄소 흡수제의 제조 및 이의 특성 평가 (Preparation of Honeycomb Carbon Dioxide Adsorbent Impregnated $K_2CO_3$ and Its Characterization)

  • 이동철;김진배;유윤종
    • 공업화학
    • /
    • 제23권6호
    • /
    • pp.624-629
    • /
    • 2012
  • 온실가스의 주요성분인 이산화탄소를 포집 및 회수하기 위해 세라믹 종이로 만든 허니컴에 $K_2CO_3$를 담지 시켜 이산화탄소 흡수특성을 알아보았다. $70^{\circ}C$, 66% RH 항온항습 조건에서 $K_2CO_3$를 담지 시킨 허니컴 흡수제의 이산화탄소 흡수량은 13.8 wt%를 나타내었다. 이러한 결과는 $K_2CO_3$ 담지율 17.6 wt%와 거의 동일한 수준으로서 허니컴 흡수제에 담지된 $K_2CO_3$의 흡수 반응이 원활하게 진행되었음을 확인할 수 있었다. 또한, 허니컴 흡수제를 충진한 반응기에 4.51% 이산화탄소와 수분 동시공급 또는 수분 선 공급 후 이산화탄소를 공급하여 $50{\sim}80^{\circ}C$ 범위에서 이산화탄소 흡수 후 파과특성을 분석하였다. 그 결과 수분을 먼저 공급한 후 건조된 이산화탄소를 공급했을 때 더욱 늦게 파괴되어 흡수 반응이 좋아짐을 알 수 있었다. 흡수제와 이산화탄소의 흡수 반응에서의 생성물인 $KHCO_3$$128^{\circ}C$에서 이산화탄소를 탈착하여 재생된다는 것을 Temperature Programmed Desorption (TPD)분석 결과를 통해 확인할 수 있었다.

비정질 탄소박막의 광발열 특성 연구 (Photothermal characteristics of amorphous carbon thin films)

  • 오현곤;조경아;김상식
    • 전기전자학회논문지
    • /
    • 제22권1호
    • /
    • pp.213-215
    • /
    • 2018
  • 본 연구에서는 실리콘 기판 위에 DC 스퍼터링 방법을 이용하여 비정질 탄소박막을 제작하고, 흡광특성과 광발열 특성을 조사하였다. 비정질 탄소박막은 1000 nm 파장에서 97%의 흡광도를 보였으며, 백색광이 조사됨에 따라 비정질 탄소박막의 온도는 $21.1^{\circ}C$에서 $24.1^{\circ}C$로 상승하여 약 $3^{\circ}C$의 온도가 증가하였다. 또한, 백색광이 50초 동안 조사되는 동안 비정질 탄소박막에서는 기판에 비해 4배 빠른 온도상승속도로 온도가 증가하였다.

PVDF/플라즈마 막접촉기를 이용한 이산화탄소의 흡수에 관한 연구 (A Study on the Absorption of Carbon Dioxide using PVDF/Plasma Membrane Contactor)

  • 최승학;;오세중
    • Korean Chemical Engineering Research
    • /
    • 제43권1호
    • /
    • pp.161-169
    • /
    • 2005
  • PVDF(polyvinylidenefluoride)중공사막 접촉기를 이용한 이산화탄소의 흡수에 관한 수치모사 및 실험을 수행하였다. 흡수제로는 물 또는 모노에탄올아민(monoethanolamine, MEA) 수용액을 사용하였다. 수치모사결과, 막접촉기에서의 이산화탄소의 농도분포는 MEA 수용액을 흡수제로 사용하였을 경우가 물을 흡수제로 사용하였을 경우보다 흡수제 공급속도의 영향을 덜 받았으며, 이산화탄소의 흡수속도 및 물질전달계수는 MEA의 농도가 증가할수록 증가하였다. 실험을 통하여 얻은 이산화탄소의 물질전달계수를 수치모사결과 및 이론치와 비교한 결과, 물을 흡수제로 사용하였을 경우 물질전달계수는 실험값과 수치모사결과, 이론값이 모두 잘 일치하였다. 반면에 MEA 수용액을 흡수제로 사용하였을 경우에는 수치모사결과와 이론값은 잘 일치하였으나, 실험값은 플라즈마로 처리한 경우와 처리하지 않은 경우 모두 수치모사 결과보다 낮은 값을 나타내었다. 그러나 막접촉기에 사용된 중공사막의 내구성은 플라즈마로 처리시킨 막이 플라즈마처리를 수행하지 않은 막보다 우수하였다.

이산화탄소 흡수를 위한 소다라임 제조 및 특성 (Preparation and Characteristics of Soda Lime for Carbon Dioxide Absorption)

  • 김영진;권석제;서준형;김양수;조계홍;조진상
    • 자원리싸이클링
    • /
    • 제32권2호
    • /
    • pp.52-58
    • /
    • 2023
  • 본 연구에서는 석회석 활용분야 확대를 위해 소석회를 이용한 소다라임 제조 기초 실험을 실시하였다. 소다라임 제조를 위해 압출식 방식과 디스크 방식의 펠렛타이져를 이용하였으며, 첨가제로 벤토나이트를 투입하여 제조한 소다라임의 이산화탄소 흡수 특성을 평가하였다. 실험결과, 제조 방식에 관계없이 이산화탄소와의 반응에 따라 소다라임에서 CaCO3의 peak가 확인되었으며, 방해석과 아라고나이트가 함께 생성된 것을 확인하였다. 디스크 방식으로 제조한 소다라임이 압출방식에 비해 더 큰 비표면적을 나타내었고, 벤토나이트를 첨가한 조건에서도 비표면적이 향상되었다. 비표면적이 향상된 시료 조건에서 이산화탄소 흡수율이 증가되는 것으로 확인되었다.

Bloating Mechanism of Lightweight Aggregate with the Size

  • Lee, Ki Gang
    • 한국세라믹학회지
    • /
    • 제53권2호
    • /
    • pp.241-245
    • /
    • 2016
  • The purpose of this study was to investigate the bloating mechanism of artificial lightweight aggregates with different sizes (ESA, effective surface area). Aggregates were produced using hard clay, stone sludge, and a bloating agent in order to observe the effect of the gradation of the artificial lightweight aggregates. Kerosene and amorphous carbon were used as bloating agent. The particle size of the produced aggregate ranged from 3 mm to 9 mm. With regard to the amount of bloating agent to be used, 2 ~ 6 parts by weight were used. The specific gravity, absorption rate, and the type of aggregates produced by rapid sintering at $1075{\sim}1200^{\circ}C$ were determined. Microstructures were observed. When ESA had a value of 1 or below, kerosene, which has a high burning rate, was found to be advantageous for use as a bloating agent. When ESA had a value of 1 or above, carbon, which has a relatively low burning rate was found to be an advantageous bloating agent. It is thought that kerosene is more advantageous, as ESA decreases, for the production of aggregates having low water absorption rate.

흡습된 CFRP의 AE에 의한 파과거동과 신뢰성 평가 (Fracture behavior using AE method and reliability assessment of CFRP based on absorbed moisture)

  • 남기우;김선진
    • 한국해양공학회지
    • /
    • 제10권4호
    • /
    • pp.38-50
    • /
    • 1996
  • Recently carbon fiber reinforced plastic (CFRP) has been used structural materials in corrosive environment such as for water, chemical tank and pipes. However, mechanical properties of such materials may be change when CFRP and exposed to corrosive environment for long periods of time. The degradation behavior of carbon fiber/epoxy resin composite material in distilled water is investigated using acoustic emission (AE) technique, Fracture toughness tests are performed on the compact tension specimens that are pilled by two types of $[O_2/9O_2]_{3s}$ and $[O/9O]_6s$. During the testes, AE test was carried out to monitor the damage of CFRP by moisture absorption. The data was treated by 2-parameter Weibull distribution and the fracture surface was observed by scanning electron microscope.

  • PDF