• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.39-41
• /
• 2000

Carbon is an attractive candidate for use in eletrochemical supercapacitors that depend on charge storage in the electrode/eletorlyte international double layer. Property of an electrical double layer capacitor depend both on the technique used to prepare the electrode and on the current collector structure. The study is to research that $V_2O_5$-carbon (SP270) composite electrode for supercapacitor. The discharge capacitance of $V_2O_5$-SP270 (20wt%) in 1st and 35cyc1e was 14F/g and 8.5F/g at current density of $0.1mA/cm^2$. The discharge process of $V_2O_5$-SP270 (20wt%) composite electrode is larger than that others.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.77-81
• /
• 2005

Porous-composite electrodes have been developed using silica gel, which reduce carbon aerogel usage with high cost. Silica gel powder was added to the carbon aerogel to simplify the manufacturing procedure and to increase the wet-ability, the mechanical strength and the CDI efficiency. Porous composite electrodes composed of carbon aerogel and silica gel powder were prepared by paste rolling method. Carbon aerosol composite electrodes with $10\times10cm^2$ are placed face to face between spacers, and assembled the four-stage series cells for CDI process. Each stage is composed of 45 cells. Four-stage series cells (flow through cells) for CDI process are put in continuous-system reactor containing 1,000ml-NaCl solution bath of 1,000 ppm. The four-stage series cells with carbon aerogel electrodes are charged at 1.2V and are discharged at 0.001V, and then read the current. Conclusively, removal efficiencies of ions using the four-stage series cells composed of carbon aerogel composite electrodes show good removal efficiency of $99\%$ respectively.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.103-106
• /
• 2000

The electronic properties of carbon nanotube are currently the focus of considerable interest. In this paper, the electronic properties of finite length effect in carbon nanotube for cabon nanoscale device is presented. To calculate the electronic properties of carbon nanotube, Empirical potential method (Brenner' hydrocarbon potential) for carbon and Tight binding molecular dynamic (TBMD) simulation are used. As a result of study, we have known that the value of the band gap decreases with increasing the length of the tube. The energy band gap of (6, 6) armchair carbon nanotube have the ranges between 0.3 eV and 2.5 eV. Also, our results were compared with the results of the other computational techniques. As that result, our results are very well united.

• Journal of Sensor Science and Technology
• /
• v.26 no.3
• /
• pp.179-185
• /
• 2017

This article describes the characteristics of nondispersive infrared carbon dioxide gas sensor according to the temperatures and humidifies. In this researches, a thermopile sensor that included application-specific integrated circuit (ASIC) was used and the White-cell structure was implemented as an optical waveguide. The developed sensor modules were installed in gas chamber and then the temperature of gas chamber has been increased from 283 K to 313 K with 10K temperature step. In order to analyze the effects of humidity levels, the relative humidity levels were changed from 30 to 80%R.H. with small humidifier. Then, the characteristics of sensor modules were acquired with the increment of carbon dioxide concentrations from 0 to 2,000 ppm. When the initial voltages of sensors were compared before and after humidifying the chamber at constant temperature, the decrements of the output voltages of sensors are like these: 9mV (reference infrared sensor), 41 mV (carbon dioxide sensor), 2 mV (temperature sensor). With the increment of ambient temperature, the averaged output voltage of carbon dioxide sensor was increased 19 mV, however, when the humidity level was increased, it was decreased 14mV. Based upon the experimental results, the humidity effect could be alleviated by the increment of temperature, so the effects of humidity and temperature could be only compensated by the ambient temperature itself. The estimated carbon dioxide concentrations showed 10% large errors below 200 ppm, however, the errors of the estimations of carbon dioxide concentrations were less than ${\pm}5%$ from 400 to 2,000 ppm.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.19-27
• /
• 2021

Electrically conductive mortar used in industrial carbon material byproducts was manufactured and analyzed in this study. The contents of the carbon material and mixed water were controlled, and the distance between electrodes was set to 0.42 m and 0.88 m. The carbon material was graphite with a layered structure. The carbon material was used as fine powder and aggregate substitutes according to particle size. The average particle sizes of each materials were 18.4㎛ and 546.1 ㎛ and the electrical conductivities were 62.3 S/m and 32.5 S/m, respectively. To maintain similar mortar flow in each sample, the water content was increased with increasing carbon material, and accordingly, the porosity showed an increasing trend. When electrode distance of the mortar (week 6) was 0.42 m, the voltage-current values were 342 V-1.48 A (S20) and 349 V-1.44 A (S30). For electrode distance of 0.88 m, these values were 513 V-0.98 A (S20) and 500 V-1.01 A (S30). The exothermic properties improved with increasing carbon material content and decreasing electrode distance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.406-408
• /
• 1999

Amorphous carbon nitride thin films were prepared on pretreated silicon(100) substrate in sputtering graphite target by activated gas phase using RF reactively sputtering. We measured the FT-IR spectrum to identify C=N(nitrile)stretching mode(2200cm$\^$-1/), C-H stretching mode(2800cm$\^$-1/), C-H bending mode, C=C stretching mode C=N(imino) mode(1680cm$\^$-1/ ), and the XPS to investigate chemical structure of surface. By the results of FT-H and XPS spectrum, We confirmed that amorphous carbon nitride films with typel (C(1s): 285.9[eV], N(1s): 398.5[ev]) and type 2(C1s): 287.5[eV, N(1s): 400.2[eV]) successfully were synthesized by RF reactively sputtering

• Journal of Forest and Environmental Science
• /
• v.34 no.6
• /
• pp.472-480
• /
• 2018

This study was conducted to estimate carbon storage in Quercus mongolica stands based on stand age class, and to provide basic data on the carbon balance of broad-leaved forests of Korea. The research was conducted at the experimental forest of Kangwon National University, Hongcheon-gun County, Gangwon-do Province, Korea. Three plots were set up in each of three Q. mongolica forest stands (III, V, and VII) to estimate the amount of carbon stored in Q. mongolica aboveground vegetation, coarse woody debris (CWD), organic layer, mineral soil, and litterfall. The carbon storage of the aboveground vegetation increased with an increase in stand age, while the carbon storage ratio of stems decreased. The carbon storage of the organic layer, CWD, and litterfall did not show any significant differences among age classes. In addition, the carbon concentration and storage in the forest soils decreased with depth, and there were no differences among age classes for any soil horizon. Finally, the total carbon storage in the III, V, and VII stands of Q. mongolica were 132.2, 241.1, and $374.4Mg\;C\;ha^{-1}$, respectively. In order to predict and effectively manage forest carbon dynamics in Korea, further study on deciduous forests with other tree species in different regions will be needed.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.347-351
• /
• 2003

The extraction of glycyrrhizic acid from licorice using supercritical carbon dioxide (SCCO$_2$) was investigated with respect to the effects of extraction parameters such as the kind and amount of modifier, temperature, pressure, and extraction time. The conventional organic solvent extraction was also conducted for a quantitative comparison. The content of glycyrrhizic acid in crude extracts was analyzed by HPLC and the yield of glycyrrhizic acid was computed as a weight percent recovery. The optimal pressure and temperature for SCCO$_2$ extraction were found to be 40 MPa and 80$^{\circ}C$, respectively, when SCCO$_2$ was modified with 70% aqueous ethanol. Under the same pressure and temperature, the highest recovery was attained to be 104.57% in the first 60 min when the concentration of 60%, aqueous ethanol in SCCO$_2$ was 15%.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.2926-2936
• /
• 2021

Rare-earth (RE) industries generate a massive amount of radioactive residue containing high thorium concentrations. Due to the fact that thorium is considered a non-economic element, large volume of these RE processed residues are commonly disposed of without treatment. It is essential to study an appropriate treatment that could reduce the volume of waste for final disposition. To this end, this research investigates the applicability of carbon-based adsorbent in separating thorium from aqueous phase sulphate is obtained from the cracking and leaching process of solid rare-earth by-product residue. Adsorption of thorium from the aqueous phase sulphate by carbon-based electrodes was investigated through electrosorption experiments conducted at a duration of 180 minutes with a positive potential variable range of +0.2V to +0.6V (vs. Ag/AgCl). Through this research, the specific capacity obtained was equivalent to 1.0 to 5.14 mg-Th/g-Carbon. Furthermore, electrosorption of thorium ions from aqueous phase sulphate is found to be most favorable at a higher positive potential of +0.6V (vs. Ag/AgCl). This study's findings elucidate the removal of thorium from the rare-earth residue by carbon-based electrodes and simultaneously its potential to reduce disposal waste of untreated residue.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.419-424
• /
• 2016

$H_5PMo_{10}V_2O_{40}$ ($PMo_{10}V_2$) catalyst chemically immobilized on sulfur-containing mesoporous carbon (S-MC) was prepared, and it was applied to the benzyl alcohol oxidation reaction. S-MC was synthesized by a templating method using SBA-15 and p-toluenesulfonic acid as a templating agent and a carbon precursor, respectively. S-MC was then modified to have a positive charge, and thus, to provide sites for the immobilization of $PMo_{10}V_2$. By taking advantage of the overall negative charge of $[PMo_{10}V_2O4_{40}]^{5-}$, $PMo_{10}V_2$ catalyst was immobilized on the S-MC support as a charge matching component. It was revealed that $PMo_{10}V_2$ species were finely and molecularly dispersed on the S-MC via chemical immobilization. In the vapor-phase oxidation of benzyl alcohol, $PMo_{10}V_2$/S-MC catalyst showed higher conversion of benzyl alcohol and higher yield for benzaldehyde and benzoic acid than unsupported $PMo_{10}V_2$ catalyst. The enhanced catalytic performance of $PMo_{10}V_2$/S-MC was due to fine dispersion of $PMo_{10}V_2$ species on the S-MC via chemical immobilization.