• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.7-19
• /
• 2007

The purpose of posted speeds is to provide a speed that ensures the safety of vehicle flow according to given road situations. Because of this, posted speeds must be carefully examined, and posted speeds at freeway exits and entrances in particular should consider car characteristics. Posted speeds at freeway exits and entrances must take changing speeds due to curve radiuses into consideration and in this study, an 85th percentile speed becomes the most important element to consider. When it is considered that most traffic accidents occur because of variations in speed between cars, posted speeds should be set after considering car traveling characteristics. Within these dimensions, instead of putting significance on an upper direction regulation or lower direction regulation, speed distributions which fit to the characteristics of each road should be fully considered. Accordingly, this study evaluated appropriate posted speeds that will reduce the dangers of traffic accidents through posted speed regulations of roads now in operation by offering a posted speed setting method theory, using entries at Yangji, Yongin, and Cheongwon interchanges as subjects.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.215-220
• /
• 2003

In this paper the dynamic characteristics of a Swing Motion Bogie, such as a critical speed and a carbody vibration, are investigated in reply to the request of the Meridian Rail Corporation in the United States. Also described are experimental results of the maximum speed, the derailment coefficient, the lateral force, the vertical force, the vibration acceleration and steady state lateral acceleration measured from main line tests.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.129-130
• /
• 2017

This paper suggests study of basic structure design and structural analysis for the twin car-ferries. The rules and methodology for the analysis of strength of medium and small high speed vessels with a length of more than 50m and a width / ratio of more than 12, such as car-ferries, have not been clarified yet. Therefore, in this paper, the scantling of the members is based on the Korea Classification standards, and the car-ferries standards were additionally applied to verify the structural strength of the design. The results of this study are expected to be useful as basic data related to structural design and structural analysis of high speed twin car-ferries.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.15-20
• /
• 1983

The nature and the sources of sound in cars is discussed in the light of many previous works, and the importance of the system resonances inside cars is suggested. An investigation of a 'boom' problem in a small size passenger car is described. It was established that the 'boom' frequencies coincided with engine firing frequency and also with several system resonances. To find out main transmission path of the noise to the car interior, various possible sources were eliminated from the investigation by means of simple modification to the vehicle. Data on the structural modes of the body, and the acoustic modes of the passenger compartment at various forcing cases were obtained to provide better understanding of the problem. It was found that the acoustic resonance responsible for the boom was controlled largely the bending motion of the floor. To investigate the effect of the structural modification to the acoustic response, center floor of the car was reinforced. a great reduction of the noise inside the car especially at the offending speed range, was achieved by this modification.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2002.05a
• /
• pp.25-27
• /
• 2002

Most of automotive companies make use of spot welding in order to assemble car body. Even though spot welding has been developed for last 60 years, there were some limitations in upgrading production line. Laser welding has advantages In productivity and degree of freedom in design. Thanks to fast speed, we can reduce body assembly line by 80%. Also with non-contact & one-side approach, it is possible to design various car body structures. New project launched the laser welding technology in mass production has started in 1999. In this paper, a new type of cur named 'next generation vehicle (NGV)' is introduced. The car body of NGV is welded with 4㎾ Nd: YAG laser.

• Journal of Fashion Business
• /
• v.15 no.4
• /
• pp.110-121
• /
• 2011

As car seat is the closest part between driver and rider, the interest of the security and comfort of the seat is increasing. This research discovered the best condition for dyeing and finishing to produce a fabric for car seat and also developed the design of fabrication to give the feeling from such a finishing. The best condition of coating finishing solution is aqueous PU 65%, dye resist reagent 20%, water 12%, thicker 3%, and knife thickness 2mm, tenter temperature $170^{\circ}C$, tenter speed 35yard/min, viscosity 12,000cps and stirring time 100kg * 30min. According to the processing time of knife coating upon stirring the change of resin and the uneven of coating quantity was shown. This problems will be solved by means of automatic temperature control apparatus for resin and sealing device through a coming research.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.36-41
• /
• 2003

Among welded structure bogies in use for high speed freight car, a part of bogies manufactured in 1999 and 2000 have found problems that failure occurs in its end beam. In case of a freight car a difference of weight between empty and loading conditions are worse than in case of a passenger car. Moreover its brake system is tread brake without second suspension system. A failure of end beam is supposed to be due to loading by brake rather than vertical loading by freight. This failure can make brake system useless and may be a cause of derailment in the worst case. In this study, we have proposed a simple torsion-free brake shoe holder hanger to remove torsion of hanger bracket which is supposed to be one of causes of failure and performed finite element analyses for making trial manufactures and its application.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.103-108
• /
• 2003

Among welded structure bogies in use for high speed freight car, a part of bogies manufactured in 1999 and 2000 have found problems that failure occurs in its end beam. In case of a freight car a difference of weight between empty and loading conditions are worse than in case of a passenger car. Moreover its brake system is tread brake without second suspension system. A failure of end beam is supposed to be due to loading by brake rather than vertical loading by freight. This failure can make brake system useless and may be a cause of derailment in the worst case. In this study, in order to be proved the cause of failure and to solve the problem it is described that we have measured load history acted on end beam and set up the procedures.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.4
• /
• pp.266-273
• /
• 2003

The purpose of this study is to obtain the effects of the parameters of the suspension system in railway rolling-stock for KT-23 type Passenger vehicle. According to the analysis and the small scale model car test. optimal condition was obtained for the stiffness ratio of secondary spring to primary spring of the suspension system and the mass ratio of the bogie frame to the car body. The analysis of the study shows that if the car body mass is increased or secondary stiffness Is lowered, the vertical vibration level is reduced and the passenger comfort can be improved. Especially, strong peaks are occurred in the frequencies corresponding to the rotational speed of driving axle and vehicle wheel. Hence, in order to obtain the dynamic characteristics through the small scale model car, the driving method of the vehicle on the test bench, rotational characteristics of the wheel and the natural modes of vehicle should be investigated and be modified.

• Fire Science and Engineering
• /
• v.22 no.4
• /
• pp.70-75
• /
• 2008

Recently, there are so many studies related safety of railway vehicle. But these studies are focused on the passenger car, metro system and high speed train. However, the leakage of hazardous materials may contaminate the environment and cause terrible damage to the ecology, even the human and properties. And so, Safety and security have been already established in many countries, currently they are investing lots of money on the development of technology to prevent accidents. Therefore it is necessary to make a systematic plan and develop safety specifications. In this study, we compared between domestic and international general oil tank car safety regulations for the hazardous materials, and prepare the basic for the making of systematic safety plans and safety regulations for the transport of hazardous materials by tank car.