• Journal of Korean Society of Transportation
• /
• v.19 no.2
• /
• pp.89-98
• /
• 2001

The objective of this Paper is to derive an adjustment factor for the presence of heavy vehicles when estimating capacity at unsignalized intersections (and/or at modern roundabouts). According to the 1997 and 2000 Highway Capacity Manual (HCM), potential capacity in such cases is estimated by simply adjusting base critical gap and base follow-up time. However, the procedure suggested in the HCM may lead to some errors in the adjustment, hence resulting in poor evaluation and design for the intersections, because it determines the value of adjusting factors by only the number of lanes on main streets regardless of the types of heavy vehicles. This paper shows a simple formula for making the adjustment. This formula is much like the HCM formula used for heavy vehicles in estimating highway capacity by the adoption of passenger car units (PCU). In contrast to the traditional approaches seen in the HCM, the PCU value of this case is explicitly expressed by the flow rate in the major streams and the gap difference in critical gaps chosen by passenger cars and particular heavy vehicles. Computational results of the adjustment factor are graphically illustrated.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.4 no.2
• /
• pp.85-98
• /
• 2009

Objectives : The purpose of this study was to find out tendency of traffic accident patients treated in korean medicine hospital. Methods : We investigated 77 patients who were treated in Semyung University Korean Medicine Hospital from 1 st, January, 2007 to the 30st September, 2009. Results and Conclusions : 1. In distribution of gender and age, the rate of male was 36.4%, that of female was 63.6% and majority of patients were twenties, thirties and forties. 2. In the traffic accident patterns, the most was car crash from behind(49.4%) and after traffic accident, 42 patients(54.6%) visited our hospital in less than 5 days. 3. 22 patients(28.6%) choose the oriental medical treatment for primary care. And 35 patients(45.4%) visited our hospital due to preference of oriental medicine. 4. In partial pain, most was the neck(76.6%), followed by low back(61.0%). 5. In radiation test(excluded sprain and straightening), the most was HIVD of L-SPINE(14.0%). 6. In the periods of admission, less than 7 days was the 1st(36.4%), 14 days was the 2nd(27.3%). 7. The treatment was effective to 67 patients out of 77 patients who had been hospitalized.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.8 no.1
• /
• pp.27-38
• /
• 2013

Objectives : The purpose of this study is to investigate the latest trends of korean Medicine treatments on traffic accident for recent 5 years. Methods : We investigated the studies on korean Medicine treatments for traffic accident via searching 6 Korean web databases. As a result, 65 research papers were found to be analyzed according to their published year, the titles of journals, the types of study, the number of cases, the sites of injury, the types of treatments the instruments for assessment and ethics approvals. Results : 65 articles were published since 2008. The studies on korean Medicine treatments about traffic accident were mainly published in Journal of Oriental Rehabilitation Medicine. 10 case studies, 14 case series, 11 non randomized controlled trials, 21 randomized controlled trials and 9 systemic reviews had been under research. The most frequently occurred symptoms were neck pain and low back pain. In most studies, various korean Medicine treatments were used to treat the symptoms. Visual analogue scale(VAS) and neck disability index(NDI) were used as primary assessments. In most clinical studies, there were no mention about approval of institutional review board(IRB). Conclusion : In this study, we analyzed the trends of korean Medicine treatments on traffic accident from 2008 to 2012. Reviewing the domestic trends of studies on korean Medicine treatments for traffic accident and examining the strong and weak points of those treatments are essential for the future studies. It is needed to adopt the qualitative methods of evaluation in order to develop a level of evidence.

• Journal of Environmental Science International
• /
• v.23 no.9
• /
• pp.1643-1654
• /
• 2014

The university is one of the main energy consumption facilities and thereby releases a large amount of greenhouse gas (GHG). Accordingly, efforts for reducing energy consumption and GHG have been established in many local as well as international universities. However, it has been limited to energy consumption and GHG, and has not included air pollution (AP). Therefore, we estimated GHG and AP integrated emissions from the energy consumed by Seoul National University of Science and Technology during the years between 2010 and 2012. In addition, the effect of alternative energy use scenario was analysed. We estimated GHG using IPCC guideline and Guidelines for Local Government Greenhouse Inventories, and AP using APEMEP/EEA Emission Inventory Guidebook 2013 and Air Pollutants Calculation Manual. The estimated annual average GHG emission was $11,420tonCO_{2eq}$, of which 27% was direct emissions from fuel combustion sectors, including stationary and mobile source, and the remaining 73% was indirect emissions from purchased electricity and purchased water supply. The estimated annual average AP emission was 7,757 kgAP, of which the total amount was from direct emissions only. The annual GHG emissions from city gas and purchased electricity usage per unit area ($m^2$) of the university buildings were estimated as $15.4kgCO_{2eq}/m^2$ and $42.4tonCO_{2eq}/m^2$ and those per person enrolled in the university were $210kgCO_{2eq}$/capita and $577kgCO_{2eq}$/capita. Alternative energy use scenarios revealed that the use of all alternative energy sources including solar energy, electric car and rain water reuse applicable to the university could reduce as much as 9.4% of the annual GHG and 34% of AP integrated emissions, saving approximately 400 million won per year, corresponding to 14% of the university energy budget.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.104-114
• /
• 2016

Potholes have caused diverse problems such as wheel damage and car accident. A pothole detection technology is the most important to provide efficient pothole maintenance. The previous pothole detections have been performed by manual reporting methods. Thus, the problems caused by potholes have not been solved previously. Recently, many pothole detection systems based on video cameras have been studied, which can be implemented at low costs. In this paper, we propose a new pothole detection algorithm based on saliency map information in order to improve our previously developed algorithm. Our previous algorithm shows wrong detection with complicated situations such as the potholes overlapping with shades and similar surface textures with normal road surfaces. To address the problems, the proposed algorithm extracts more accurate pothole regions using the saliency map information, which consists of candidate extraction and decision. The experimental results show that the proposed algorithm shows better performance than our previous algorithm.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.67-74
• /
• 2011

In recent years, with increasing utilization of mobile devices such as smartphones, the need for PNS(Pedestrian Navigation Systems) that provide guidance for moving pedestrians is increasing. For the navigation services, road network is the most important component when it comes to creating route and guidance information. In particular, pedestrian network requires modeling methods for more detailed and vast space compared to road network. Therefore, more efficient method is needed to establish pedestrian network that was constructed by existing field survey and manual editing process. This research proposed a pedestrian network creation method appropriate for pedestrians, based on CNS(Car Navigation Systems) data that already has been broadly constructed. Pedestrian network was classified into pedestrian link(sidewalk, side street, walking facility) and openspace link depending on characteristics of walking space, and constructed by applying different methodologies in order to create path that similar to the movements of actual pedestrians. The proposed algorithm is expected to become an alternative for reducing the time and cost of pedestrian network creation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.69-74
• /
• 2022

Even after the drunk driving law was revised through the Yoon Chang-ho Act in 2019, the proportion of habitual offenders among all drunk drivers in 2021 was 4.7%, up 0.5% from 2018. In addition, drunk driving is not easily stopped due to the addiction of alcohol, and there is a high probability of recidivism in accidents as it is often driven again. Therefore, in this paper, to prevent this, when alcohol is measured using its own sensor rather than a manual police measure, the vehicle stops and related data such as the current location and time are automatically saved. Since it is not possible to develop directly on the car, this system was developed by converging various technologies and sensors such as Arduino board, Firebase, and GPS based on the IoT environment in consideration of the simulation environment.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.4
• /
• pp.251-258
• /
• 2014

A wheelchair is a typical mobility aid for the physically disabled or the old and the weak, and is the most commonly used rehabilitation aid. In general, most of users of manual wheelchair have difficulty though vocational rehabilitation and independent living is possible. The reason is that long-distance movement is always accompanied with wheelchair transfer problem because a wheelchair is used as direct means of transport. Hence, the wheelchair transfer problem should be first solved in order that a wheelchair user can independently live. Therefore, this study examined and analyzed the domestic and overseas launched products and patented technologies of wheelchair transfer system for vehicle, and proposed a wheelchair transfer mechanism of a new system for vehicle. This study proposed a wheelchair transfer mechanism for vehicle in order to remove the disadvantage of wheelchair transfer system for vehicle to support the conventional wheelchair user's movement, and in order to conform with the structure of domestic welfare vehicle for the disabled. Because a difference between storage space installed in the roof of vehicle and storage space for leisure, which is generally utilized, gets to disappear by applying this proposed mechanism, popularity among users can be increased. And storage space that has become smaller like this will be capable of decreasing the disadvantage of air resistance in traveling. Besides, because of getting to conform with the structure of welfare vehicle, restrictions on the application range will disappear from small sedan to SUV. Therefore, users can have more choices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.100-105
• /
• 2016

The use of 3D scanners has increased gradually according to increasing 3D printer applications. The precision inspection of car parts or electronic components is an important issue not only in the field of mass production, but also in small-scale production. Recently, 3D scanner equipment efficiency and recognition technology has been improved continuously. On the other hand, the spraying time to prepare 3D scanning is time-consuming and has environmental problems. Therefore, an automatic spray system has been in demand by the manufacturing industry. Automatic spray equipment was newly developed for the preparation of a 3D scanner. In this research, the automatic spray system guarantees uniform spray operation. To determine the optimal spray parameters, various spraying methods, solutions and conditions were tested and compared with the experiments. The preparation time for 3D scanning was reduced to 1/10 compared to the manual spraying time, and indicates the optimal spraying conditions through a comparison of various spray coating conditions.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.21-27
• /
• 2023

The mold industry in Japan, an advanced country in the mold industry, is also at a point of great change. The main causes are the Ukraine crisis and the collapse of the global supply chain (parts supply chain) caused by COVID-19. In addition, the prices of overseas products are rising sharply due to rapid exchange rate fluctuations (decrease in the value of the yen). Until now, Japan's monotsukuri industry has been actively pursuing overseas expansion, riding the trend of globalization. However, the trend began to rapidly reverse, and now the monotsukuri industry that had expanded overseas is showing a tendency to return to Japan. Another factor of change is the change in the automobile industry, which is the most demanded product in the mold industry. As the automobile industry evolves from gasoline cars to electric cars, the number of parts that make up a car will drastically decrease. This trend is expected to increase the demand for small-scale production of a variety of products in the mold industry, and furthermore, it is expected that short delivery times will be required in parts development. As in Korea, the production population working in the mold industry is rapidly decreasing in Japan as well. Even if you add up the total population working in manufacturing in Japan, it only accounts for about 15%. Even in Japan, it is judged that it will be difficult to sustain the monotsukuri industry with this small production population. Therefore, since improvement in production efficiency cannot be expected with the same manual dexterity as before, the mold industry is also demanding the development of mold technology at a different level than before to increase productivity. In this paper, I would like to introduce new Japanese mold technology collected through attending the Intermold exhibition. This is an example of applying a dedicated pin (Gastos) to a mold to prevent an increase in internal pressure during plastic injection molding, and a deep drawing press molding technology with an inherent hydraulic function.