• Journal of Chest Surgery
• /
• 제46권4호
• /
• pp.309-311
• /
• 2013

A 43-year-old man experienced chest trauma due to a car accident. Compound sternal fractures with severe dislocation were seen on computed tomography of the chest. Using a SternaLock plating system with manual reduction, fixation of the sternal fracture was successfully performed. There were no complications related to the operation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.750-761
• /
• 2008

The social and economical value assessment of railway facilities implies unaccountable values such as: reduction of travel time, reduction of car accident, reduction of air pollution. However, the value of railway facilities has been evaluated as the transportation and management results. The investment and management results of railway need to be considered objectively. Therefore, this study established the economical value assessment method of railway facilities composed of 10 items of economical value through the existing a preliminary assessment investigation, a manual of railway investment assessment, paper study. In addition, this study proposed the strategy for the value assessment of railway facilities before and after.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.811-812
• /
• 2016

Wiring Harness는 자동차들 구동시키는데 필요한 전기적 신호를 전달하는 매개체 역할을 하며 자동차 성능에 많은 영향을 받는다. 현재의 작업현장에서의 Wiring Harness 작업은 작업자의 수작업에 의존하고 있어 생산성이 낮고 제품불량률도 높다. 따라서 본 연구에서는 반복적인 휴먼에러 낮추기 위해, LED 점등에 의해 순차적으로 지시하고 동시에 확인 검사를 수행할 수 있는 무선 하네스 컨베이어 시스템을 구현한다. 그리고 결과에 의해 공정개선을 통해 자동화를 개선한다. 또한 작업자의 생산성을 높이고 불량을 감소시킨다.

• 방송공학회논문지
• /
• 제27권2호
• /
• pp.228-239
• /
• 2022

본 논문에서는 카셰어링 서비스(car sharing service)에서 차량 상태 무인 검수를 위한 흠집 탐지 딥 러닝 모델을 제안한다. 기존의 차량 상태 검수 시스템은 대여 전, 후 사진에서 각각 흠집을 탐지하는 딥 러닝 모델과 탐지된 두 흠집 영상을 수작업으로 대조하여 새롭게 발생한 흠집을 탐색하는 두 단계로 구성되어 있다. 따라서 수동작업이 필요한 두 단계 모델을 한 단계로 줄이는 무인 흠집 탐지 모델을 위성영상에서 변화를 탐지하는 딥 러닝 모델에 전이 학습을 적용하여 구축한다. 그리고 광택 처리된 자동차 표면의 휘도가 비등방성이고 비전문가인 이용자가 일반 카메라로 촬영하기 때문에 정반사(specular reflection)가 흠집 탐지 성능에 크게 영향을 미친다. 따라서 정반사광으로 발생하는 오탐지를 감소시키기 위하여 정반사광 성분을 제거하는 전처리 과정을 적용한다. 이용자가 휴대폰 카메라로 촬영한 데이터에 대해 제안하는 시스템은 주관적인 측면과 정밀도(precision), 재현율(recall), F1, Kappa 척도면에서 각각 67.90%, 74.56%, 71.08%, 70.18%로서 높은 일치도를 보인다.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.49-55
• /
• 2006

In the consideration of the problem occurred by certain return bender brazing welding works that depend only on handworks, the automatization of the whole production line is impossible due to the high dependency of skillful workers. In addition, it is difficult to establish a standardization due to the various heat exchanger model and irregular amount of orders, and the fault reduction is also impossible due to the severe difference in brazing conditions. It is necessary to develop a method, which quantitively analyzes the problem existed in this manual brazing welding of return benders and technically solves that problem, and to lead the improvement of the productivity and cost reduction in order to increase the business competitive power. Then, this will contribute the technical development of automatic welding for Korea's heat exchanger businesses. Thus, this study develops an automatic technology, which automatically controls the flame strength using digital control methods, for various models and produces a sample model. It is possible to increase the productivity and produce uniformed and qualified products by solving the problem existed in manual processes using the developed automatic return bender brazing system. In addition, the brazing condition can be automatically controlled according to the model and line speed, and such an economical operation can reduce the production cost. The developed system is expected to future applications not only heat exchangers in the field of refrigeration and air conditioning, but also other various industrial fields that apply heat exchangers, such as car and boiler industries.

• 한국ITS학회 논문지
• /
• 제16권4호
• /
• pp.107-121
• /
• 2017

본 연구에서는 군집주행환경에서 비자율차의 행태분석을 위해 영상기반의 조사를 통해 피실험자의 인적특성과 군집주행 인지여부를 조사하고, 주행 시뮬레이션 실험을 통해 비자율차의 차량거동을 수집했다. 또한, 주행 시뮬레이션 실험 후 NASA-TLX 설문조사를 통해 작업부하점수를 조사했다. 영상기반 인지특성 조사 결과 피실험자 대부분이 군집주행 중인 차량들을 인지하고 군집 차량군으로 인해 부담감을 느끼는 것으로 나타났다. 군집주행환경에서의 평균속도가 비군집주행환경일 때보다 낮게 나타났고, 평균속도의 표준편차는 군집주행환경일 때 더 높게 나타났다. 인적특성과 작업부하점수를 연계분석한 작업부하평가 결과 군집, 비군집주행환경 시 인적특성별로 작업부하점수가 통계적으로 유의한 차이가 나타나는 결과들을 확인했다. 인적특성과 차량거동을 연계분석한 차량거동평가 결과에서도 군집, 비군집주행환경 시 통계적으로 유의한 차이가 나타나는 결과들을 확인했다. 본 연구의 결과를 고령운전자, 여성 등 고위험군 운전자의 안전성 증대, 비자율차 운전자에게 주변 군집주행차량에 대한 정보 제공 방안 모색 등의 비자율차 운전자를 위한 교통관리전략을 수립하는데 활용할 수 있을 것이라 판단된다.

• 한국정밀공학회지
• /
• 제28권12호
• /
• pp.1434-1440
• /
• 2011

In this paper, we assessed muscular activities of lower limbs and foot pressure for car and bus drivers according to operating three electronic pedals that we developed. To analyze drivers' physical exhaustion, muscular fatigue of lower limbs was evaluated. Eleven car drivers and six urban bus drivers were participated in this experiment. The virtual driving system was used for the real driving environment. The virtual driving system was comprised of a spring seat, a steering wheel, pedals (clutch, excel and brake pedals), a manual transmission and a virtual driving simulation. For the real vibration like situation on the road, six degree of freedom motion base system was used. Measured muscles were rectus femoris (RF), biceps femoris (BF), tibialis anterior (TA) and gastrocnemius (Gn) muscles. For the quantitative muscular activities, integrated electromyography (IEMG) was analyzed. Muscular fatigues also were analyzed through the analysis of the median frequency. In addition, foot pressures were analyzed and compared through the peak and averaged pressure during the operating three developed electronic pedals. The experiments are conducted with total 17 drivers, 11 general public and 6 drivers. As a result of the analysis, electromyogram and fatigue analysis through intermediate frequency reduction for pedal-1 more efficient than other pedals. And foot pressure also was decreased. Consequently, we suggested the most efficient pedal and method to minimize the amount of cumulative fatigue.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.141-148
• /
• 2013

There are several problems in the conventional 2-D image processing and 3-D measurement systems. In the case of the 2-D image processing system, it is not possible to detect elevation data. In a 3-D measurement system, it requires a skillful operator and a lot of time for measuring data. Also, there exist data errors depending on operators. The limitation of detecting elevation data in the 2-D image processing system can be solved by laser diodes. In this study an algorithm that measures the accurate data in a subject face to be detected by combining laser diodes and a commercial CCD camera is developed. In the development process, a planar equation is developed using laser diodes and the equation is used to obtain a normal vector. Based on the results, an algorithm that transforms commercial CCD camera coordinates to 3-D coordinates is proposed. The completed measurement method will be applied to replace a manual measurement system for vehicle bodies and parts by an automated system.

• 한국지리정보학회지
• /
• 제25권4호
• /
• pp.181-199
• /
• 2022

본 연구에서는 정밀도로지도를 활용하여 자동차의 거동 정보와 정밀도로지도의 위치 관계를 계산하여 차로 이탈 경고장치의 성능을 평가하는 방법론을 도출하였다. 한국의 노면 표시 설치에 대한 기준과 차로 이탈 경고장치의 평가 기준에 대한 분석을 하고, 평가 기준에 맞는 정밀도로지도의 구축하고 평가 장치 을 구성하여 제안한 방법론에 대한 시험을 통해 제안한 방법론에 대한 검증을 실시하였다. 정밀도로지도를 활용한 차로 이탈 경고장치의 평가는 정밀도로지도와 정밀차량위치를 이용한 데이터취득, 실시간 데이터 처리 및 이탈 판단 확인 절차 수행만으로 평가가 가능하고 다양한 도로 환경에 적용 가능하다.

• 한국보건간호학회지
• /
• 제12권1호
• /
• pp.55-74
• /
• 1998

In the past most major accidents resulted in death, but today there is a dramatic increase in the number of people who survive such accidents but who are left with permanent injury. Particularly, children who are inquisitive about their surroundings but immature in their ability to assess danger, are more vulnerable to accidents and their causes as well as to determine attitudes towards prevention. The main objective of the study was to assess the effectiveness of using an accident prevention manual for accident for accident prevention education. The study was a quasi-experimental study using a questionnaire format. The subjects of the study were 393 mothers of children attending six day care centers in Seoul. Data collection was done between May 1 and June 15, 1997. The tools used for the study were a questionnaire developed the researchers and a manual for accident prevention. The collected data were analyzed using SPSS. The results of the study are as follows: 1. Types of accidents included stabbing, bums, falls from heights, choking, falls on slippery surfaces, traffic accidents, drowning, poisoning, and electrical shock in that order of frequency. 2. The main causes of accidents in children were from cosmetics and household medications. 3. The most frequent locations of accidents in the home were the bathroom, kitchen, and stairways in that order. 4. For $90.4\%$ of children safety seats were not used when the ridding in a car. 5. In examining the parents' accident prevention practices, it was found that many parents used only . one electrical outlet for many appliances, tending to overload the electricity lines and that they were not practically concerned bout the flammability of children's pajamas, indicating a less than positive attitude towards fire prevention. 6. The parents had not provided their children with any instruction on accident prevention or on what to do after an accident had occurred. 7. After the use of pamphlet in an accident prevention education program, it was found that there was a statistically significant difference in the degree to which children carried out safety measures (t=14.96, p=.000) and in their safety habits (t=-1.67, p<.1) indicating an effectiveness in this method of education. The results of this study showed that there are many things in a child's environment that can cause accidents and that the possibility of an accident occurring is high. So nurses looking after children should be aware of the need for safety education to prevent accidents in the home and plan to provide appropriate educational material to help parents with this education.