• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.421-427
• /
• 2005

This work analyzes the behaviors of aerated lubricant in the gap between con-rod bearing and journal. It is assumed that the film formation with aerated lubricant is influenced by the two major factors. One is the density characteristics of the lubricant due to the volume change of lubricant for the formation of bubbles and the other is the viscosity characteristics of the lubricant due to the surface tension of the bubble in the lubricant. These two major factors surprisingly increase the load capacity in some ranges of bubble sizes and densities. Modified Reynolds' equation is developed for the computation of fluid film pressure with the effects of aeration ratio in the lubricant. From the calculated load capacity by solving modified Reynolds' equation, journal locus is computed with Mobility method after comparing it with the applied load at each time step. The differences of journal orbits between aerated and pure lubricants are shown in the computed results.

• 한국기계연구소 소보
• /
• 통권18호
• /
• pp.21-27
• /
• 1988

In this study, a series of experiments and analyses are performed to estimate the static characteristics of hydrostatic journal bearing such as load capacity, pressure change in each recess, eccentricity of spindle, etc. The experiments are carried out for a multi-recess type journal bearing with capillary restrictor. The Finite Element Method(FEM) is used for the analyses. The predicted load capacity under the condition of stationary or eccentric ratio of bellow 0.2 of the spindle shows excellent agreement with the measured. But, with an increase of the eccentric ratio when the spindle is rotating, the predicted load capacity is largely estimated than the measured. It seems that the difference is mainly caused among others from the fact that the effect of oil-viscosity variation due to the temperature change in the bearing is not introduced into the analyses. The analysis method proposed to estimate the static characteristics of hydrostatic journal bearing is considered to be very reliable since the predicted results are overall in good agreement with the measured.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권3호
• /
• pp.600-612
• /
• 2013

In 2006, Zhang and Wang proposed a data hiding scheme based on Exploiting Modification Direction (EMD) to increase data hiding capacity. The major benefit of EMD is providing embedding capacity greater than 1 bit per pixel. Since then, many EMD-type data hiding schemes have been proposed. However, a serious disadvantage common to these approaches is that the embedded data is compromised when the embedding function is disclosed. Our proposed secure data hiding scheme remedies this disclosure shortcoming by employing an additional modulus function. The provided security analysis of our scheme demonstrates that attackers cannot get the secret information from the stegoimage even if the embedding function is made public. Furthermore, our proposed scheme also gives a simple solution to the overflow/underflow problem and maintains high embedding capacity and good stegoimage quality.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.485-487
• /
• 1995

This paper proposes a GAs-applied method for power system planning using series capacitors in order to control the flow of power as desired and utilize the existing transmission facilities to its transfer capacity limits. The control strategy problem is formulated as optimization problem. Also, in employing genetic algorithms to solve the optimization problems, real variable-based genetic algorithm is presented to save the coding processing time and obtain more accurate value of the variable. An application to IEEE 57-bus test system proves that the proposed method is effective for improvement of power system transfer capacity.

• 산업기술연구
• /
• 제41권1호
• /
• pp.7-13
• /
• 2021

Fiber-reinforced polymer reinforcement or polyurea reinforcement techniques are applied to strengthen unreinforced masonry walls (UMWs). The out-of-plane reinforcing effect of sprayed glass fiber-reinforced polyurea (GFRPU), which is a composite elastomer made of polyurea and milled glass fibers on UMW, is experimentally verified. The out-of-plane strengths and ductile behaviors based on various coating shapes are compared in this study. An empirical formula to describe the degree of reinforcement on the out-of-plane strength of the UMW is derived based on the experimental results. It is reported that the peak load-carrying capacity, ductility, and energy absorption capacity gradually improve with an increase in the strengthening degree or area. Compared with the existing masonry wall reinforcement method, the GFRPU technique is a construction method that can help improve the safety performance along with ease of construction and economic efficiency.

• 융복합기술연구소 논문집
• /
• 제4권1호
• /
• pp.5-8
• /
• 2014

Recently ionic liquids received much attention as novel materials capable of replacing traditional solvents. The applicability of the ionic liquids should be determined based on their physico-chemical properties. Heat capacity is one of the most important properties to be considered when a process is developed using the ionic liquids and currently DSC has been proved as an effective technique to measure the heat capacity. Micro DSCII can measure heat capacities of various liquids by both an isothermal step method and a scanning method. DSC Q100 and MDSC are able to measure heat capacities of several ionic liquids. For each ionic liquid linear regression of the heat capacity as a function of temperature has been performed to increase accuracy. To investigate the feasibility of ionic liquids as PCMs, their heat capacities have been measured by using Pysis I DSC. This paper briefly summarizes the present techniques of measuring heat capacities of ionic liquids by DSC.

• 한국항공운항학회지
• /
• 제31권2호
• /
• pp.55-65
• /
• 2023

Due to extreme urbanization, ground transportation in the city center is saturated, and problems such as the lack of expansion infrastructure and traffic congestion increase social costs. To solve this problem, a 3D mobility platform, Urban Air Mobility (UAM), has emerged as a new alternative. A vertiport is a physical space that conducts a similar role to an airport terminal. Vertiport consists of take-off and landing facilities (TLOF, Touchdown and Lift-Off area), space for boarding and disembarking from UAM aircraft (gates), taxiways, and passenger terminals. The type of vertiport (structure, number of facilities) and concept of operations are key variables that determine the number of UAM aircraft that can be accommodated per hour. In this study, a capacity calculation method was presented using an optimization technique (Deterministic Integer Linear Programming). The absolute capacity of the vertiport was calculated using an optimization technique, and a sensitivity analysis was also performed.

• 한국터널지하공간학회 논문집
• /
• 제20권5호
• /
• pp.773-786
• /
• 2018

본 연구에서는 강관다단공법에 사용되는 씰링재의 점도특성에 대한 연구를 수행하였다. 씰링재는 차수 및 공벽 안정성 확보 기능과 더불어 후속공정인 그라우트재 주입 시 주입이 원활히 될 수 있도록 최소한의 강도를 보유하여야 한다. 교반조건에 따른 씰링재의 특성을 점도를 통하여 간접적으로 파악하였다. 초기 물과 벤토나이트의 사전 교반 특성에 따라 점도의 급격한 증가 시점이 상이하게 나타났다. 사전교반 시간이 길수록 벤토나이트가 팽윤 할 기회가 많아지므로 상대적으로 짧은 시간에 점도의 급격한 증가 현상이 나타났다. 또한 급격한 점도 증가 이전 단계에서는 물/시멘트/벤토나이트 혼합물이 틱소트로피 거동을 보이다가 점도 증가 이후부터는 레오펙시 거동을 보인다. 또한 사전 교반 시간은 혼합물이 재료분리 거동에도 영향을 미침이 확인이 되었다. 따라서 본 연구결과를 바탕으로 씰링재의 요구성능 및 배합절차에 대해서 추가 논의가 필요하며, 향후 시멘트와 벤트나이트의 상호작용에 대해 심도 깊은 연구를 통하여 현장에서 적용 가능한 가이드 도출이 필요하다.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1097-1108
• /
• 2023

Recently, demand for technology for energy economy and stable supply is increasing due to the increase in power demand of loads. The amount of DC power generation using new and renewable energy is noticeably increasing, and the use of DC power supplies is also increasing due to the increase in electric vehicles and digital loads. During parallel operation to increase the capacity of the power converter, the module bus method or the method using Can communication and serial communication has significant difficulties in smooth operation due to communication time delay for information sharing. Synchronization of information sharing of each power converter is essential for smooth parallel operation, and minimization of communication time delay is urgently needed as a way to overcome this problem. In this paper, a new communication method using pulse width information is proposed as a communication method specialized for parallel operation of power converters to compensate for the disadvantage of communication transmission delay in the existing system. The proposed communication method has the advantage of being easily implemented using the PWM and Capture function of the microcomputer. In addition, the DC/DC converter for DC distribution was verified through simulation and experiment, and it has the advantage of easy capacity expansion when applied to parallel operation of various types of power converters as well as DC/DC converters.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2131-2140
• /
• 1998

Signal-to-interference ratio (SIR)-based dynamic code allocation method to be rioritized for handoff call is proposed and evaluated in a direct sequence-code division multiple access (DS-CDMA) cellular systm. Proposed method allocates a code to a mobile terminal according to the restidual capacity computed by SIR in the base station. We consider the voice activity detection to increase the system capacity. We evaluate the performance of proposed method with computer simulation. And the handoff decision function that controls handoff of mobile terminal is interodcued. The proposed method provide much improvement in the forced termination probability and handoff call fail probability.