• Journal of Animal Science and Technology
• /
• v.51 no.1
• /
• pp.53-60
• /
• 2009

Thirty one Hanwoo steers were used in a completely randomized design experiment to see the effects of concentrate feeding method (group vs. individual feeding) and age at slaughter (26 vs. 28 months of age) on growth performance, feed intake and carcass characteristics. Steers were randomly assigned to one of four groups, G26 (group feeding slaughtered at 26 months of age), G28 (group feeding slaughtered at 28 months of age), I26 (individual feeding slaughtered at 26 months of age) or I28 (individual feeding slaughtered at 28 months of age). Amount of concentrate were restricted to 1.5% of BW for the growing period and 1.8% of BW for the early fattening period in both groups. For the late fattening period, concentrate were given ad libitum for G26 and G28, but were given up to 1.7% of BW for I26 and I28. Average daily gains were higher in individual feeding groups (I26 and I28) than those in group feeding groups (G26 and G28) for the early fattening period (p<0.05). ADGs were higher in group feeding groups than those in individual feeding groups (p<0.05). Concentrate intake in individual feeding groups tended to be higher compared to that in group feeding groups for the early fattening period, but tended to be higher in group feeding groups compared to that in individual feeding groups for the late fattening period. Feeding method or slaughter age had no significant effects on carcass characteristics, yield grade and quality grade. Shear force and tenderness of longissmus muscle were higher in groups slaughtered at 28 months of age than in groups slaughtered at 26 months of age (p<0.05). Feeding method or slaughter age had no effects on cooking loss, water holding capacity, juiciness, flavor, moisture, protein and fat of longissmus muscle.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Journal of Korea Game Society
• /
• v.4 no.4
• /
• pp.11-18
• /
• 2004

The on-line games in the past were played by only two persons exchanging data based on one-to-one connections, whereas recent ones (e.g. MMORPG: Massively Multi-player Online Role-playings Game) enable tens of thousands of people to be connected simultaneously. Specifically, Korea has established an excellent network infrastructure that can't be found anywhere in the world. Almost every household has a high-speed Internet access. What made this possible was, in part, high density of population that has accelerated the formation of good Internet infrastructure. However, this rapid increase in the use of on-line games may lead to surging traffics exceeding the limited Internet communication capacity so that the connection to the games is unstable or the server fails. expanding the servers though this measure is very costly could solve this problem. To deal with this problem, the present study proposes the load distribution technology that connects in the form of local clustering the game servers divided by their contents used in each on-line game reduces the loads of specific servers using the load balancer, and enhances performance of sewer for their efficient operation. In this paper, a cluster system is proposed where each Game server in the system has different contents service and loads are distributed efficiently using the game server resource information such as CPU utilization. Game sewers having different contents are mutually connected and managed with a network file system to maintain information consistency required to support resource information updates, deletions, and additions. Simulation studies show that our method performs better than other traditional methods. In terms of response time, our method shows shorter latency than RR (Round Robin) and LC (Least Connection) by about 12%, 10% respectively.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.677-686
• /
• 2008

This study was conducted to evaluate the effects of dietary wild-ginseng adventitious root meal on growth performance, blood characteristics and meat quality characteristics in growing-finishing pigs. Ninety six pigs[(Landrace×Yorkshire)×Duroc] with average initial body weight of 68.29±0.31kg were used in 70d growth trial. Dietary treatments included 1) CON(Basal diet), 2) WGR1(Basal diet+0.5% wild- ginseng adventitious root meal), 3) WGR2(Basal diet+1.0% wild-ginseng adventitious root meal) and 4) WGR3(Basal diet+1.5% wild-ginseng adventitious root meal). The pigs were allotted into four dietary treatments with six replicate pens and four pigs per pen in a completely randomized design. For the whole period, final body weight and ADG were increased in CON treatment compared to WGR3 treatment(Linear effect, P=0.005). In blood characteristics, red blood cell(RBC) was significantly increased in CON and WGR2 treatments compared to WGR1 treatment (Quadratic effect, P=0.019). WGR2 treatment resulted in higher white blood cell(WBC) than CON and WGR1 treatments(Linear effect, P=0.041). WBC difference was significantly improved in WGR2 treatment compared to other treatments (Linear effect, P=0.042). Total protein was increased in WGR2 treatment compared to CON treatment (Quadratic effect, P=0.011). In cholesterol concentration of blood, total cholesterol, HDL-cholesterol, LDL-cholesterol and triglyceride were not significantly different among treatments. In meet quality, pH in WGR1 treatment was higher than WGR3 treatment(Quadratic effect=0.022). Water holding capacity(WHC) was significantly increased in WGR2 treatment compared to WGR3 treatment(Quadratic effect, P=0.050).

• Korean Journal of Poultry Science
• /
• v.40 no.2
• /
• pp.97-103
• /
• 2013

The present study examined effects of production performance, immune activity and egg quality by raising on exercise yard in laying Hens, the results of which could be used as baseline data to enhance animal welfare and the safety of livestock products. A total of 90 Hy-line-Brown laying hens of 13 weeks old were used in the experiment for 38 weeks. The cage group (Cage group) was raised in a cage, where an area of $0.084m^2$ was assigned to two hens, while hens in the exercise yard $1.1m^2$ group ($1.1m^2$ group) was assigned to a combination of a chicken house ($0.11m^2$) and a exercise yard ($1.1m^2$) per a hen. Hens in the exercise yard $2.2m^2$ group ($2.2m^2$ group) was assigned to a combination of a chicken house ($0.11m^2$) and a exercise yard ($2.2m^2$) per a hen. Treatment was replicated 3 times with ten birds per replication. Ten birds were arranged according to randomized block design. While initial egg production rate was significantly higher in the Cage group, $1.1m^2$ group exhibited a slightly higher rate in the mid- and late-stage of the experiment, although the difference was not statistically significant. Exercise yard treatment groups exhibited a higher feed intake rate than the Cage group up until the hens were 39 weeks old (P<0.05), but the difference dissipated from that age on. The age at first egg in the exercise yard treatment groups was 16 days later than that for the Cage group (P<0.05), although differences in the quality of the eggs were not observed. The results of immune activity test showed that IgA in the exercise yard treatment groups was significantly higher than that in the Cage group (P<0.05). IgG, IgM, and corticosterone were also higher in the exercise yard treatment groups. The soil in exercise yard increased of organic matter and decreased of cation exchange capacity (CEC) in raised hens. In sum, raising hens in a exercise yard raise style decreased the rate of initial egg production, which was followed by a slight increase during the latter part of the experiment. The exercise yard raise hens' immune activity was heightened.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.10 no.1
• /
• pp.1388-1393
• /
• 1968

Higher yield in rice paddies is greatly dependent on adequately balanced and timely supply of water. A majority of rice paddy in Korea is generally irrigated by rainfall, but in many cases it has to be supplemented by artificial irrigation for optimum rice culture. Although the water requirement of rice plant is far higher than that of other crops, submerged condition of rice paddy is not necessarily required. The moisture requirement of rice plant varies with its growing stages, and it is possible to increase the irrigation efficiency through reduction of water loss due to percolation in rice paddies. An experiment was conducted on the effectiveness of economical use of water by different irrigation period and different method of cultivation. The experimental plots were set up by means of randomized block design with three duplications; (a) Alltime submerged (b) Economically controlled, and (c) Extremely controlled. Three different irrigation periods were (a) Initial stage (b) Inter-stage, and (c) last stage. The topsoil of the three plots were excavated to the depth of 30cm and then compacted with clay of 6 cm thickness. Thereafter, they were piled up with the excavated top soils, leveled and cored with clay of 6cm thickeness arround footpath in order to prevent leakage. The results obtained frome the experiments are as follows; (1) There is no difference among the three experiment plots in terms of physical and chemical contditions, soil properties, and other characteristics. (2) Colulm length and ear length are not affected by different irrigation methdos. (3) There is no difference in the mature rate and grain weight of rice for the three plots. (4) The control plot which was irrigated every three days shows an increased yield over the all the time submerged plot by 17 persent. (5) The clay lined plot whose water holding capacity was held days long, needs only to be irrigated every 7 days. (6) The clay lined plot showes an increased yield over the untreated plot; over all the time submerged plot by 18 percent, extremely controlled plot by 18 percent, and economically controled plot by 33 percent.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1007-1018
• /
• 2009

Hydrocyclone is widely used in industry, because of its simplicity in design, high capacity, low maintenance and operational cost. The separation action of a hydrocyclone treating particulate slurry is a consequence of the swirling flow that produces a centrifugal force on the fluid and suspended particles. In spite of hydrocyclone have many advantage, the application for treatment of urban stormwater case study were rare. We conducted a laboratory scale study on treatable potential of micro particles using hydrocyclone filter (HCF) that was a combined modified hydrocyclone with perlite filter cartridge. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particles sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin, road sediment, commercial area manhole sediment, and silica gel particles. Experimental studies have been carried out about the particle separation performance of HCF-open system and HCF-closed system. The principal structural differences of these HCFs are underflow zone structure and vortex finder. HCF was made of acryl resin with 120 mm of diameter hydrocyclone and 250 mm of diameter filter chamber and overall height of 800 mm. To determine the removal efficiency for various influent concentrations of suspended solids (SS) and chemical oxygen demand (COD), tests were performed with different operational conditions. The operated maximum of surface loading rate was about 700 $m^3/m^2$/day for HCF-open system, and 1,200 $m^3/m^2$/day for HCF-closed system. It was found that particle removal efficiency for the HCF-closed system is better than the HCF-open system under same surface loading rate. Results showed that SS removal efficiency with the HCF-closed system improved by about 8~20% compared with HCF-open system. The average removal efficiency difference for HCF-closed system between measurement and CFD particle tracking simulation was about 4%.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.213-226
• /
• 2011

In global supply chain, the scheduling problems of large products such as ships, airplanes, space shuttles, assembled constructions, and/or automobiles are complicated by nature. New scheduling systems are often developed in order to reduce inherent computational complexity. As a result, a problem can be decomposed into small sub-problems, problems that contain independently small scheduling systems integrating into the initial problem. As one of the authors experienced, DAS (Daewoo Shipbuilding Scheduling System) has adopted a two-layered hierarchical architecture. In the hierarchical architecture, individual scheduling systems composed of a high-level dock scheduler, DAS-ERECT and low-level assembly plant schedulers, DAS-PBS, DAS-3DS, DAS-NPS, and DAS-A7 try to search the best schedules under their own constraints. Moreover, the steep growth of communication technology and logistics enables it to introduce distributed multi-nation production plants by which different parts are produced by designated plants. Therefore vertical and lateral coordination among decomposed scheduling systems is necessary. No standard coordination mechanism of multiple scheduling systems exists, even though there are various scheduling systems existing in the area of scheduling research. Previous research regarding the coordination mechanism has mainly focused on external conversation without capacity model. Prior research has heavily focuses on agent-based coordination in the area of agent research. Yet, no scheduling domain has been developed. Previous research regarding the agent-based scheduling has paid its ample attention to internal coordination of scheduling process, a process that has not been efficient. In this study, we suggest a general framework for agent-based coordination of multiple scheduling systems in global supply chain. The purpose of this study was to design a standard coordination mechanism. To do so, we first define an individual scheduling agent responsible for their own plants and a meta-level coordination agent involved with each individual scheduling agent. We then suggest variables and values describing the individual scheduling agent and meta-level coordination agent. These variables and values are represented by Backus-Naur Form. Second, we suggest scheduling agent communication protocols for each scheduling agent topology classified into the system architectures, existence or nonexistence of coordinator, and directions of coordination. If there was a coordinating agent, an individual scheduling agent could communicate with another individual agent indirectly through the coordinator. On the other hand, if there was not any coordinating agent existing, an individual scheduling agent should communicate with another individual agent directly. To apply agent communication language specifically to the scheduling coordination domain, we had to additionally define an inner language, a language that suitably expresses scheduling coordination. A scheduling agent communication language is devised for the communication among agents independent of domain. We adopt three message layers which are ACL layer, scheduling coordination layer, and industry-specific layer. The ACL layer is a domain independent outer language layer. The scheduling coordination layer has terms necessary for scheduling coordination. The industry-specific layer expresses the industry specification. Third, in order to improve the efficiency of communication among scheduling agents and avoid possible infinite loops, we suggest a look-ahead load balancing model which supports to monitor participating agents and to analyze the status of the agents. To build the look-ahead load balancing model, the status of participating agents should be monitored. Most of all, the amount of sharing information should be considered. If complete information is collected, updating and maintenance cost of sharing information will be increasing although the frequency of communication will be decreasing. Therefore the level of detail and updating period of sharing information should be decided contingently. By means of this standard coordination mechanism, we can easily model coordination processes of multiple scheduling systems into supply chain. Finally, we apply this mechanism to shipbuilding domain and develop a prototype system which consists of a dock-scheduling agent, four assembly- plant-scheduling agents, and a meta-level coordination agent. A series of experiments using the real world data are used to empirically examine this mechanism. The results of this study show that the effect of agent-based platform on coordinated scheduling is evident in terms of the number of tardy jobs, tardiness, and makespan.

• Cartoon and Animation Studies
• /
• s.47
• /
• pp.31-52
• /
• 2017

NCS education was created to realize a society in which skills and abilities are respected, such as transcending specifications, establishing recruitment systems, and developing and disseminating national incompetence standards. At the university level, special lectures and job training are being strengthened to raise industrial experts. Especially, in the field of animation, new technologies are rapidly emerging and demanding convergent talents with various fields. In order to meet these social demands, there is a limit to the existing one-class teaching method. In order to solve this problem, it is necessary to participate in a variety of specialized teachers. In other words, rather than solving problems of students' job training and job creation, It is aimed to solve jointly, Team teaching was suggested as a method for this. The expected effects that can be obtained through this are as follows. First, the field of animation is becoming more diverse and complex. The ability to use NCS job-related skills pools can be matched with professors from other departments to enable a wider range of professional instruction. Second, it is possible to use partial professorships in other departments by actively utilizing professors in the university. This leads to the strengthening of the capacity of teachers in universities. Third, it is possible to build a broader and more integrated educational system through cooperative teaching of professors in other departments. Finally, the advantages of special lectures and mentor support of college professors' pools are broader than those of field specialists. A variety of guidance for students can be made with responsible professors. In other words, time and space constraints can be avoided because the mentor is easily met and guided by the university.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.2
• /
• pp.37-51
• /
• 2018

Recently, urban parks are required to actively participate with residents in order to strengthen social functions and maintain sustainable management. This study analyzed the formation process of volunteer resident groups (Chamsamo) in the neighborhood parks in which local residents can participate in an ongoing basis based on the solidarity of a daily living space. The important factors in the activation of resident activity are derived from 5 aspects including resources, local area, resident group capacity, resident group role, and public support. The results of the study are as follows. 1) Life-friendly resources: It was important to find life-friendly resources such as 'Chamsaem' in the park. The combined resources of continuous human activities provided various benefits to the residents. This has led to stronger attachment and community activities to continue to utilize attractive resources in the park. 2) Sharing Common Daily Spaces and Expansion: As the Chamsamo activities were centered around the neighborhood, the network of activists in the local community expanded. This led to continued resident interest and favorable participation as well as to the regional expansion of Chamsamo activities. 3) Park management as part of everyday life: Park management became a part of everyday life, and pleasant park management was facilitated by utilizing the talents of the residents, who carried out diverse activities and constantly streamlined their hard labor. 4) Chamsamo's Leadership Linking Residents and the Public Sector through Leading Park Management Activities: Chamsamo served as a middle leader in linking the public sector and its users. 5) Role and Support of the Public Sector: In order to be able to sustain the activities of residents, the government's willingness to support the resident-led activities of the park in planning and operating the public sector was required. In the public management system of the park, support for residents' activities such as financing, education, and consulting was necessary.