• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.55-64
• /
• 2016

In this paper bearing capacity and safety margin of shallow foundation on weathered soil ground against shear failure by using current design method of allowable stress design (ASD), load resistance factor design (LRFD) based on reliability analysis and partial safety factor design (PSFD) in Eurocode were estimated and compared to each other. Results of the plate loading test used in construction and design were collected and analysis of probability statistics on soil parameters affecting the bearing capacity of shallow foundation was performed to quantify the uncertainty of them and to investigate the resistance bias factor and covalence of ultimate bearing capacity. For the typical sections of shallow foundation in domestic field as examples, reliability index was obtained by reliability analysis (FORM) and the sensitivity analysis on soil parameters of probability variables was performed to investigate the effect of probability variable on shear failure. From stability analysis for these sections by ASD, LRFD with the target reiability index corresponding to the safety factor used in ASD and PSDF, safety margins were estimated respectively and compared.

• Journal of Environmental Science International
• /
• v.23 no.5
• /
• pp.755-761
• /
• 2014

Tourist Psychological Capacity (TPC) is an important issue of the Tourism Capacity research. We gained the tourist satisfaction through the questionnaire investigation in Mount Tai Scenic Area and obtained the tourist satisfaction function using SPSS17.0 regression analysis method. Then we got the best psychological capacity of tourists with the Marginal Satisfaction Method. Finally we verified the influencing factors on TPC. The study found that the best TPC of Mount Tai Scenic Area is 10323 persons; Female shows lower TPC than male. Moreover, female satisfaction is more easily influenced by visitors' number increasing than male satisfaction; TPC plays negative correlation with the increasing of age. Teenagers and adults have no much difference in TPC, but the seniors present a relatively lower TPC than other; The higher education, the smaller TPC.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.3 s.29
• /
• pp.9-18
• /
• 1998

An improved evaluation method of load-carrying capacity for the large-scaled offshore structures, which subjected to the axial force and bending moments simultaneously at the piles, was suggested with reliability analysis and advanced working stress method. Reliability analysis requires the fracture probability and safety factor(${beta}$) for each of forces and the load-carrying capacity due to combined action of axial force and bending moments from $P_n - {beta}$ Curve. The combined equation due to those forces, which suggested by the Korean Specification for the marine structure, was derived for the advanced working stress method and applied to evaluate the load-carrying capacity of jacket-type dolphin piers.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2470-2474
• /
• 1999

The main drawback of parallel type active power filters (APFs) is the large capacity required for harmonic compensation. This paper evaluates the APF capacity requirement for harmonic/reactive power compensation for thyristor converter load. Theoretically achievable maximum power factor under partial load is evaluated. it is shown that the APF capacity can be considerably reduced by deliberately limiting the peak current, while maintaining the filtering performance with an acceptable total harmonic current level. the minimum capacity requirement of APF with current limiting is evaluated as a function of the firing angle of thyristor converter and short circuit ratio(SCR).

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.126-129
• /
• 1999

In this paper, it is assumed that a mobile radio channel is a Rayleigh distributed multipath fading channel and Erlang capacity and equivalent channel numbers are calculated for the reverse link of a imperfect power controlled DS/CDMA cellular system considering both shadowing and multipath fading. The DS/CDMA blocking probability is calculated based on a new analysis method that considers Erlang capacity and ICF(interference correction factor) using the median value of $E_{b(i)}$/ $I_{o}$ corresponding to each reverse link user. It is showed that the effect of multipath fading must not be ignored in Erlang capacity of the IS-95 DS/CDMA cellular system and the Erlang capacity is decreased according to the increase of the deviation of the imperfect power control, to the decrease of the processing gain, to the increase of the voice activity.y.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.277-279
• /
• 2002

Recently, power requirement has been increasing. But the large generation unit is hardly installed because of economic and environment problem. Therefore, the concern for DG(distributed generation) is growing. Present, allowable interconnection capacity of DG for composite distributed generation is studied. In this paper, it is studied that the new interconnection capacity of DG for composite distribution system interconnected DG. We study new allowable interconnection capacity by power factor and placement. We study SERV(sending end reference voltage) variation and allowable interconnection capacity interconnected new DG.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.319-324
• /
• 2009

Lately, knowledge-based society comes, it is important for enterprises to creatively utilize knowledge of technology for technological innovation. So, Technological innovation capacity of enterprises is important factor of business success. To improve technological innovation capacity, enterprises should well utilize their internal knowledges and external knowledges which come from technological diffusion. To well utilize external knowledges of enterprises they should well understand external knowledge flow. Especially knowledge flow also occurs frequently between nations, understanding of knowledge flow which occurs between nations is important to improve nation`s technological innovation capacity. So this paper presents comparison of technological innovation capacity and knowledge diffusion flow between nations.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.490-495
• /
• 2009

In this study, estimate solution of ultimate axial capacity for axial loaded pile is proposed using step-wised shape. This is verified for effective appling on realistic factor by calibration chamber tests. Estimation method of ultimate axial capacity in this study is verified by calibration chamber test. The results of ultimate axial capacity through this proposed method have sufficiently low standard derivations and COVs. Also, this is verified through test that method is similarly resulted with measured values.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.11a
• /
• pp.165-173
• /
• 2000

Analytic models have been developed to solve integrated production-distribution problems in supply chain management (SCM). As one of major constraints in analytic models, capacity, which is the total operation time in this paper has mostly been known or disregarded assuming infinite capacity. Also, as major factors, machine processing time to fabricate or assemble a part or product at a certain machine center in production system and vehicle processing time to deliver a product to a customer by a certain vehicle in distribution system have been fixed and regarded as a static factor, But in the real systems significant differences exit between capacity and the required time to achieve the production-distribution plan and between processing time and consumed time to process a part or product. In this paper, capacity and processing times in the analytic model are considered as dynamic factors and adjusted by the results from independently developed simulation model, which includes general production-distribution characteristics. Through experiments, we obtain the more realistic solutions reflecting stochastic natures by performing the iterative analytic-simulation procedure.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.486.2-486
• /
• 2001