• 한국표면공학회지
• /
• 제49권2호
• /
• pp.152-158
• /
• 2016

We investigated the effect of capacitively coupled Ar plasma treatment on contact resistance ($R_c$) and channel sheet resistance ($R_{sh}$) of graphene field effect transistors (FETs), by varying their channel length in the wide range from 200 nm to $50{\mu}m$ which formed the transfer length method (TLM) patterns. When the Ar plasma treatment was performed on the long channel ($10{\sim}50{\mu}m$) graphene FETs for 20 s, $R_c$ decreased from 2.4 to $1.15k{\Omega}{\cdot}{\mu}m$. It is understood that this improvement in $R_c$ is attributed to the formation of $sp^3$ bonds and dangling bonds by the plasma. However, when the channel length of the FETs decreased down to 200 nm, the drain current ($I_d$) decreased upon the plasma treatment because of the significant increase of channel $R_{sh}$ which was attributed to the atomic structural disorder induced by the plasma across the transfer length at the edge of the channel region. This study suggests a practical guideline to reduce $R_c$ using various plasma treatments for the $R_c$ sensitive graphene and other 2D material devices, where $R_c$ is traded off with $R_{sh}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.22-26
• /
• 2008

In this paper, we developed a hybrid simulation model of carbon laser ablation under the Ar plasmas consisted of fluid and particle methods. Three kinds of carbon particles, which are carbon atom, ion and electron emitted by laser ablation, are considered in the computation. In the present simulation, we adopt capacitively coupled plasma with asymmetrical electrodes. As a result, in Ar plasmas, carbon ion motions were suppressed by a strong electric field and were captured in Ar plasmas. Therefore, a low number density of carbon ions were deposited upon substrate. In addition, the plume motions in Ar gas atmosphere was also discussed.

• Journal of information and communication convergence engineering
• /
• 제9권2호
• /
• pp.217-219
• /
• 2011

As silicon devices shrink and their density increases, the low dielectric constant materials instead of $SiO_2$ film is required. SiOC film as low-k films was deposited by the capacitively coupled plasma chemical vapor deposition and then annealed at $300{\sim}500^{\circ}C$ to find out the properties of the dependence on the temperature and polarity. This study researched the dielectric constant using by the structure of the metal/SiOC film/p-Si, chemical shift, thickness, refractive index and hardness. The trend of reflective index was inverse proportioned the thickness, but the dielectric constant was proportioned it. The dielectric constant decreased with decreasing the thickness and the increment of the refractive index.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.902-907
• /
• 2003

In this paper, the ITO thin film, which is considered as one of the most currently used material for the high performance transparent conducting films for the PDP cell, was made in a parallel-plate, capacitively coupled DC magnetron sputtering system. Some electrical and optical properties of ITO films were investigated and discussed on the basis of glow discharge characteristics. The optimized thin film fabricating conditions of Ar gas pressure and substrate temperature were derived from the Paschen curve and glow discharge characteristics. The maximum transmittance of 89.61 % in the visible region and optical band gap of 3.89 eV and resistivity of 1.67${\times}$10$\^$-3/ $\Omega$-cm were obtained under the conditions of 300 C of substrate temperature and 10∼15 mtorr of pressure, which corresponds nearly to that of Paschen minimum.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.95-98
• /
• 2003

Tin doped indium oxide(ITO) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, liquid crystal display, plasma display panel, thermal heater, and other sensors, were prepared by using the capacitively coupled DC magnetron sputtering method. The influence of the substrate temperature, working gas pressure and deposition time on the electrical, optical and morphological properties were investigated experimentally. ITO films with the optimum growth conditions showed resistivity of $2.36{\times}10^{-4}(\Omega}-cm$ and transmittance of 86.28% for a film 680nm thick in the wavelength range of the visible spectrum.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1430-1432
• /
• 2003

Al doped Zinc Oxide(ZnO:Al) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, plasma display panel, thermal heater, and other sensors, were prepared by using the capacitively coupled DC magnetron sputtering method. The influence of the substrate temperature, working gas pressure and deposition time on the electrical, optical and morphological properties were investigated experimentally. ZnO:Al films with the optimum growth conditions of working gas pressure and substrate temperature showed resistivity of $9.64{\times}10^{-4}\;{\Omega}$-cm and transmittance of 90.02% for a film 860nm thick in the wavelength range of the visible spectrum.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.453-453
• /
• 2007

Electrodeless fluorescent lamp exhibit two modes of operation: a low density mode in which the power is capacitively coupled to the plasma and which is known as the E-mode, and a higher density mode which is an inductive discharge known as the H-mode. The transition between these two(E to H) mode exhibits hysteresis. It is observed that transition currents change at different frequencies and hysteresis exists not only between the starting and minimum maintaining currents of the electromagnetic mode (H mode) discharge but also between the starting and minimum maintaining currents of the electrostatic mode (E mode) discharge. Hysteresis effect can be important role in dimming system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1189-1192
• /
• 1993

Organic thin films were fabricated an using interelectrode capacitively coupled type plasma polymerizaion apparatus, and their optical properties were investigated. A deposition rate of styrene thin films is linearly increased, but one or vinyl-pyridine thin films is nonlinearly increased with increasing of polymerization time, pressure and monomer flow rate. The transmittance of single layer thin films is constant, but that of multi-layer appeared irregular peak with increasing of the number of layers. And then the refractive index of organic thin films is various from 1.55 to 1.65 with wavelength, the extinction coefficient indicated $10^{-3}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1560-1561
• /
• 2007

Electrodeless fluorescent lamp exhibit two modes of operation : a low density mode in which the power is capacitively coupled to the plasma and which is known as the E-mode, and a higher density mode which is an inductive discharge known as the H-mode. The transition between these two(E to H) mode exhibits hysteresis. It is observed that transition currents change at different frequencies and hysteresis exists not only between the starting and minimum maintaining currents of the electromagnetic mode (H mode) discharge but also between the starting and minimum maintaining currents of the electrostatic mode (E mode) discharge. Hysteresis effect can be important role in dimming system.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.437-437
• /
• 2010

DC Hollow cathode 방전은 약 100여 년 전, Paschen에 의해 실험된 이후로 광원, 스퍼터링 공정, 이온빔 소스 등 다양한 분야에 이용되어 왔다. 최근 태양전지용 마이크로 결정질 실리콘 증착 시, RF CCP의 전극에 복수의 홀 혹은 트렌치 구조를 두어 Hollow cathode 방전 효과를 이용하여 향상된 공정 속도로 공정을 진행한다. 그러나 RF-MHCD (Multi hole cathode discharge) 공정을 위한 최적 규격의 홀 기에 관한 연구는 그 중요성과 응용성에도 불구하고 깊게 이루어지지 못한 바 있다. 그러므로 저자는 Capacitively Coupled Plasma (전극 간격 : 4cm, 전극 직경 : 14cm) 장비에서 평면 전극과 10mm 깊이와 각각 3.5mm, 5mm, 7mm, 10mm 직경의 홀이 있는 4개의 전극을 이용하여 Argon RF-MHCD 방전을 관찰하여 조건 별 최적의 홀 전극 디자인을 도출하였다. 실험 조건은 64.5mTorr ~ 645mTorr압력 범위/ 1A~9A이며, 플라즈마는 전극 사이 중앙에 설치한 RF-compensated Langmuir Probe와, 전극과 전기적으로 접촉하는 1000:1 Probe 와 Voltage-Current Probe를 이용하여 측정되었다. 실험 결과 압력 조건 별로, 최적의 전자 밀도를 유도하는 전극 상 홀의 직경이 달라짐을 확인하였다.