• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.418-426
• /
• 2019

Purpose: After analyzing the seismic capability of low-rise RC grid structures with insufficient seismic performance, the purpose of the project is to install steel slab hysteretic dampers (SSHD) to improve the seismic performance of beams and columns, and to suggest measures to minimize damage to the structure and human damage when an earthquake occurs. Method: The evaluation of the seismic performance of a structure is reviewed based on the assumption that the seismic performance is identified for the grid-type subway systems that are not designed to be seismic resistant and the installation of an SSHD system, a method that minimizes construction period, if insufficient, is required. Result: After the application and reinforce of structure with SSHD, and the results of eigenvalue analysis are as follows. The natural periodicity of longitudinal direction was 0.55s and that of vertical direction was 0.58s. Conclusion: As results of cyclic load test of structure with SSHD, the shear rigidity of damper is 101%, the energy dissipation rate is 108% and, plastic rotation angle of all column and beam is satisfied for $I_o$ level and therefore it is judged that the reinforce effect is sufficient.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.46-54
• /
• 2018

A total of 19 elevators for evacuation were installed in the Lotte World Tower and it is planned to operate the shuttle using the manual key from five refuge floors to the 1st floor in an emergency. In the event of a fire or other disaster, it is necessary to conduct intensive analysis to determine how much RSET reduction could be achieved using the evacuation elevator compared to the existing evacuation plans. When the optimal transportation sharing ratio by the evacuation elevators was 40% at the Lotte World Tower, the RSET of the evacuation scenario in parallel with the elevators in the entire building was calculated to be 1 hour and 2 minutes. The RSET of a conventional evacuation scenario (Walking along the stairs without using the elevators) was calculated to be 1 hour 29 minutes, therefore, the former evacuation scenario were found to have a shortening effect of approximately 27 minutes compared to the latter. On the other hand, to maintain this effect, each part of the evacuation route using the elevator must have the capability to protect the evacuee from any hazards caused by fires, such as smoke, flame, and radiant heat during the evacuation. Moreover, the evacuation route should be continuous from the residence position of the elevator user to the final evacuation site, and be recognized easily.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.140-147
• /
• 2019

The purpose of this study is to find biomechanical parameters for optimal shoes production through an ergonomic usability assessment of five existing types of shoes preferred by B-BOY. Ten experts and ten non-experts participated in the experiment, and 12 infrared cameras (Qualis, Oqus), force plate (Kistler, 9286AA) and foot pressure plate (Zebris Gmbh, Zebris PDM-System) were used to obtain the data. The results of the study are as follows. First, P shoes with a friction coefficient of 0.38 and a free moment of 0.32 N/m/kg are desirable in terms of traction capability and safety. Second, on the cushion, it was found that the N shoes 2.51 N, sec/kg and non-expert, and 2.86 N and sec/kg were suitable. Third, it is deemed appropriate for C shoes with a forefoot average pressure of 10.11 KPa (right), 10.05 KPa (left), and V shoes with a rearfoot average pressure of 8.4 KPa (right) and 8.36 KPa (left). In conclusion, the combination of the structure and material of V shoes should be developed for traction and stability, N shoes for cushion, and walking balance for C and V shoes.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.3
• /
• pp.351-359
• /
• 2019

Neurocognitive testing commonly uses the MMSE (Mini-Mental State Examination) to evaluate the overall cognitive function of patients at outpatient clinics, but the MMSE has recently been extensively used in the SNSB II (Seoul Neuropsychological Screening Battery II) for making diagnoses. We retrospectively investigated the results of routine neurocognitive tests and the results of the blood tests of 120 elderly patients who had been referred to a South Central Medical Center from 2017 to 2018 and who had been examined at a public health center. These subjects' space-time capability was high on the sub-region of the global deterioration scale (GDS). GDS showed a significant increase as the Na decreased on the electrolyte analysis. The subjects' concentration, their language-based orientation for space and time, their memory, and their scores for the frontal lobe function on GDS showed statistically significant reductions (P<0.001) For the normal and abnormal groups according to the ALT and creatinine levels, the frontal/execute function areas showed statistically significant differences (P<0.001) as well as negative correlation between GDS and ALT (P<0.01). In conclusion, this study provides basic information to develop test items that are important for patient screening and diagnosis, and several routine blood chemistry factors provide basic information for diagnosing and assessing the status and progress of cognitively impaired patients.

• The Journal of Society for e-Business Studies
• /
• v.24 no.2
• /
• pp.199-216
• /
• 2019

The public SW market is 3 trillion won, which is less than 10% of the total SW market. However, due to the nature of the domestic market, it is an important market with a relatively large impact on small and medium-sized software companies. In this market, government is operating the Public SW Project Demand Forecasting System in order to support the marketing activities of small and medium sized SW companies and establish a fair market order. The current system has limitations such as lack of user convenience, insufficient analysis capability and less business connection. This study was conducted to identify the problems of these systems and to propose a new system for improving the convenience of users and expanding the information utilization of SMEs. To this end, we analyzed the requirements of each stakeholder. We proposed the 2-phased forecasting cycle, the management cycle, and the system life cycle of public SW projects and created a unified identifier (UID) so that the information of those projects can be identified and linked among them. As a result, an integrated reference model of project information management based on system life cycle was developed, which can explain the demand forecasting and project information, and the improved processes was also designed to implement them. Through the result of this study, it is expected that integrated management of public SW projects will be possible.

• Management & Information Systems Review
• /
• v.38 no.1
• /
• pp.225-239
• /
• 2019

In order for a company to grow through technological innovation, technological innovation capacity to support technological innovation is more important than anything else. In addition, the technology commercialization process can not be ignored in order to lead to the improvement of the business performance. In this context, this study analyzed the impact of firm's technological innovation capacity on business performance and tried to analyze whether technological innovation capacity has a moderating effect on technological innovation capacity. To analyze the purpose of this study, we collect data through questionnaires of small and medium venture companies located in the southeast region of korea. The results of multiple regression analysis based on 132 collected company survey data are summarized as follows. First, Technology innovation capacity has a positive effect on business performance. Specifically, companies with well-equipped R&D capabilities, technology accumulation capabilities, and technology innovation systems showed higher business performance(market competitiveness, business growth potential, and business profitability). Second, technology commercialization capacity has a positive effect on the effect of technological innovation capacity on business performance. This result implies that a company with a good technical commercialization capability increases the positive influence of technological innovation capacity on business performance. The results of this study suggest that it is important to systematically manage the technology commercialization capacity in order to generate business performance through technological innovation.

• Journal of the Society of Disaster Information
• /
• v.15 no.1
• /
• pp.1-11
• /
• 2019

Purpose: This study intends to determine how disaster prevention characteristics of important state-designated wooden cultural properties in Gyeongsangnam-do vary according to the surrounding environments and to examine disaster prevention measures for wooden cultural properties that fit their surrounding environments accordingly. Method: The designation status and characteristics of cultural properties in Gyeongsangnam-do and Gyeongsangbuk-do were identified, and the damage status of cultural properties in Gyeongsangnam-do and Gyeongsangbuk-do was reviewed based on the history of disasters. Also, the disaster prevention environments for 58 state-designated wooden cultural properties in Gyeongsangnam-do and Gyeongsangbuk-do were analyzed separately into mountainous area, rural area and urban area, topographic characteristics were drawn. Results: For cultural properties located in urban areas, it was found that security guards were arranged properly and disaster prevention training was carried out well. In addition, access condition to the cultural properties was adequate; prompt access to such properties was possible. In rural areas, flame retardant works have been undertaken properly and many cultural properties were found to be located on a flat ground. Mountainous areas had highly inadequate access condition to cultural properties and disasters occurred most frequently in these areas in the past. Conclution: First, for wooden cultural properties located in urban areas, it is necessary to secure the self-defense fire service manpower for an initial response and reinforce the disaster prevention education. Second, for wooden cultural properties located in rural areas, prevention projects such as insect control project and disaster prevention insurance should be carried out in order to protect the cultural properties. Third, as for wooden cultural properties located in mountainous areas, it is necessary to prepare establish to reinforce self-response capability.

• Maritime Security
• /
• v.1 no.1
• /
• pp.311-343
• /
• 2020

Because of the global warming, the Arctic Ocean is expected to be ice-free by the year 2035. When the Arctic Ocean will be opened, a number of national interests will become more salient as experiencing a shortened sailing distance and decreasing navigation expense, possibility of natural resources transport by sea from Arctic Circle, and indirect-profit making by building a herb port in Asia. To secure the national interests and support the free activities of people in this region, R.O.K government is trying to make advanced policies. In order to carry out the naval tasks in the Arctic Ocean, using the operational characteristics(mobility, flexibility, sustainability, presence of capabilities, projection) is necessary. To this end, ROK Navy should analyze the operational environment (O.E.) by its capability(weakness and strength), opportunity, and threat. R.O.K. Navy should make an effort over the following issues to implement the tasks in the Arctic Ocean: first, Navy needs to map out her own plan (Roadmap) under the direction of government policies and makes crews participate in the education·training programs in home and abroad for future polar experts. Third, to develop the forces and materials for the tasks in cold, far operations area, Navy should use domestic well-experienced shipbuilding skills and techniques of the fourth industrial revolution. Next, improving the combined operations capabilities and military trust with other countries in the Arctic region to cover the large area with lack of forces' number and to resolve the ports of call issues. Lastly, preparation in advance to execute a variety of missions against military and non-traditional threats such as epidemics, HA/DR, SOLAS, in the future operation area is required.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.83-90
• /
• 2021

In this study, effects of the physical and chemical properties of low temperature heated carbon on electrochemical behavior as a secondary battery anode material were investigated. A heat treatment at 600 ℃ was performed for coking of petroleum based pitch, and the manufactured coke was heat treated with different heat temperatures at 700~1,500 ℃ to prepare low temperature heated anode materials. The physical and chemical properties of carbon anode materials were studied through nitrogen adsorption and desorption, X-ray diffraction (XRD), Raman spectroscopy, elemental analysis. Also the anode properties of low temperature heated carbon were considered through electrochemical properties such as capacity, initial Coulomb efficiency (ICE), rate capability, and cycle performance. The crystal structure of low temperature (≤ 1500 ℃) heated carbon was improved by increasing the crystal size and true density, while the specific surface area decreased. Electrochemical properties of the anode material were changed with respect to the physical and chemical properties of low temperature heated carbon. The capacity and cycle performance were most affected by H/C atomic ratio. Also, the ICE was influenced by the specific surface area, whereas the rate performance was most affected by true density.

• Journal of Digital Convergence
• /
• v.20 no.4
• /
• pp.193-202
• /
• 2022

The purpose of this study is to propose an effective informatization policy by categorizing consumer groups according to the level of digital divide and identifying the characteristics of each type. For this end, a total of 402 data were collected through an online and on-site surveys targeting consumers with internet experience, and the data were analyzed using the SPSS 26.0 program. As a result of conducting a K-means cluster analysis based on access to, capability, and utilization of digital devices, four consumer groups were categorized: 'device lover', 'proficient user', 'general user', and 'digital alienated'. By consumer type, significant differences were found in demographic characteristics, social capital, perception of the future information society, attitude toward technology as innovativeness, discomfort and familiarity, which are the antecedent variables of the digital divide. Significant differences in digital device satisfaction and intention to use, which are outcome variables of the digital divide, were also confirmed by consumer type. This study is academically and practically valuable in that it proposes customized informatization policies for each consumer group according to the level of digitization.