• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.23-27
• /
• 2005

Generally, when the injection molds are made in advanced nations, the improvement of a quality and production rate is obtained by using CAE. In this paper, the methodology which is possible to reduce the cycle time of injection molding process is studies by using the cooling analysis with CAE(Moldmax). In case of changing the cooling system design with the analysis result of CAE, the manimum reduction of the cycle time runs into 30 percent. Finally, the average reduction of the cycle time is 17.8 percent.

• Korean Journal of Microbiology
• /
• v.11 no.3
• /
• pp.129-133
• /
• 1973

The authors have investigated about the microbial contamination of goods which is a criterion of hygienic control. Conducting on investigation, a special attention has been paid on the rate of microbial contamination in the goods, especially in manufacturing process of the softdrink. The authors also made an experiment on total microbes which is the criterion of contamination in each step of the process and in raw materials together with materials to be used for subdividing. Results obtained were as follows : 1) The orgin of microbial contamination was found in bottle cap and in tap water, that is, there appeared 9 colony per ml in bottle cap and 31-74 colony per ml in tap water, respectively. 2) It was found that microbial contamination are 4 colony per ml in average through year. However, it appeared 1 colony per ml in winter and 8 colony per ml in summer. 3) Coliform groups are not detected in goods through a year. 4) There was no variation in number of total microbes after ion exchange resin passage in purification process of tap water. 5) The number of microbes in goods are decreased when the raw materials are treated in high temperature short time (HTST) sterilization.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.38-50
• /
• 2020

The purpose of this study is to identify the risks to financial institutions in terms of expanding potential risks due to the deferral of exposure, by identifying the structures in which real estate finance and financial institutions affect real estate prices at low interest rates. To this end, real estate financing is categorized according to the method of financing and the type of value measurement from a risk management perspective and analyzed for each case. As a result of analysis, in the case of profitable real estate, the rate of real estate is increased by directly decreasing the cap rate and directly affecting the fair value calculation method. In the case of non-profitable real estate, the real estate price is increased by expanding the leverage width of investors or financial institutions. Through the analysis of this case, the continuous increase in real estate prices over the past 10 years has the potential to prevent financial institutions from losing under the circumstances such as the growth of real estate finance due to the advancement of the financial market and the continued low interest rate trend that has continued for 10 years. It is judged that the deferred delay is part of the cause, which leads to an increase in the risk to financial institutions.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.27-31
• /
• 2016

Purpose $^{99m}Tc-DMSA$ renal scan is a test for the comparison of the function by imaging the parenchyma of the kidneys by the cortex of a kidney and by computing the intake ratio of radiation by the left and right kidney. Since the distance between the kidneys and the bladder is not far given the bodily structure of an infant, the bladder is included in the examination domain. Research was carried out with the presumption that counts of bladder would impart an influence on the kidneys at the time of this renal scan. In consideration of the special feature that only a trace amount of a RI is injected in a pediatric examination, research on the method of injection was also carried out concurrently. Materials and Methods With 34 infants aged between 1 month to 12 months for whom a $^{99m}Tc-DMSA$ renal scan was implemented on the subjects, a Post IMAGE was acquired in accordance with the test time after having injected the same quantity of DMSA of 0.5mCi. Then, after having acquired an additional image by shielding the bladder by using a circular lead plate for comparison purposes, a comparison was made by illustrating the percentile of (Lt. Kidney counts + Rt. Kidney counts)/ Total counts, by drawing the same sized ROI (length of 55.2mm X width of 70.0mm). In addition, in the format of a 3-way stopcock, a Heparin cap and direct injection into the patient were performed in accordance with RI injection methods. The differences in the count changes in accordance with each of the methods were compared by injecting an additional 2cc of saline into the 3-way stopcock and Heparin cap. Results The image prior to shielding of the bladder displayed a kidney intake rate with a deviation of $70.9{\pm}3.18%$ while the image after the shielding of the bladder displayed a kidney intake rate with a deviation of $79.4{\pm}5.19%$, thereby showing approximately 6.5~8.5% of difference. In terms of the injection method, the method that used the 3-way form, a deviation of $68.9{\pm}2.80%$ prior to the shielding and a deviation of $78.1{\pm}5.14%$ after the shielding were displayed. In the method of using a Heparin cap, a deviation of $71.3{\pm}5.14%$ prior to the shielding and a deviation of $79.8{\pm}3.26%$ after the shielding were displayed. Lastly, in the method of direct injection into the patient, a deviation of $75.1{\pm}4.30%$ prior to the shielding and a deviation of $82.1{\pm}2.35%$ after the shielding were displayed, thereby illustrating differences in the kidney intake rates in the order of direct injection, a Heparin cap and the 3-way methods. Conclusion Since a substantially minute quantity of radiopharmaceuticals is injected for infants in comparison to adults, the cases of having shielded the bladder by removing radiation of the bladder displayed kidney intake rates that are improved from those of the cases of not having shielded the bladder. Although there are difficulties in securing blood vessels, it is deemed that the method of direct injection would be more helpful in acquisition of better images since it displays improved kidney intake rate in comparison to other methods.

• Carbon letters
• /
• v.23
• /
• pp.38-47
• /
• 2017

In this study, magnetite ($Fe_3O_4$) nanoparticles were electrochemically synthesized in an aqueous electrolyte at a given potential of -1.3 V for 180 s. Scanning electron microscopy revealed that dendrite-like $Fe_3O_4$ nanoparticles with a mean size of < 80 nm were electrodeposited on a glassy carbon electrode (GCE). The $Fe_3O_4/GCE$ was utilized for sensing chloramphenicol (CAP) by cyclic voltammetry and square wave voltammetry. A reduction peak of CAP at the $Fe_3O_4/GCE$ was observed at 0.62 V, whereas the uncoated GCE exhibited a very small response compared to that of the $Fe_3O_4/GCE$. The electrocatalytic ability of $Fe_3O_4$ was mainly attributed to the formation of Fe(VI) during the anodic scan, and its reduction to Fe(III) on the cathodic scan facilitated the sensing of CAP. The effects of pH and scan rate were measured to determine the optimum conditions at which the $Fe_3O_4/GCE$ exhibited the highest sensitivity with a lower detection limit. The reduction current for CAP was proportional to its concentration under optimized conditions in a range of $0.09-47{\mu}M$ with a correlation coefficient of 0.9919 and a limit of detection of $0.09{\mu}M$ (S/N=3). Moreover, the fabricated sensor exhibited anti-interference ability towards 4-nitrophenol, thiamphenicol, and 4-nitrobenzamide. The developed electrochemical sensor is a cost effective, reliable, and straightforward approach for the electrochemical determination of CAP in real time applications.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.477-484
• /
• 2009

It is important for the strategy of service to provide the weather information in the environment that the smart clothing has been changed focusing on the consumer center. Recently, the various applications of smart clothing concept have been presented by researchers and developers. Among them, the smart clothing based on the sensors is most likely to gain the highest demand rate in the market. In this paper, we proposed the life weather index monitoring system using the wearable based smart cap. By wearing the proposed smart cap, the weather status is gathered and its signals are transmitted to the connected UMPC. It can be easily monitored in real time. To provide the life weather index according to the sensors, the weather index was analyzed in terms of 6 factors, such as, the heat index, the food poisoning index, the discomfort index, the ultraviolet index, the water pipe freeze possibility index, and the windchill temperature index. Ultimately, this paper suggests empirical application to verify the adequacy and the validity with the life weather index monitoring system. Accordingly, the satisfaction and the quality of services will be improved the smart clothing.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.219-227
• /
• 2011

The superframe structure of IEEE 802.15.4, an international standard for low rate WPAN, is composed of CAP(Contention access period) and CFP(Contention free period). CAP is the contention-based access period, while CFP is contention-free access period for supporting QoS by allocating fixed bandwidth. The standard can support QoS for only a few devices, because the maximum number of GTSs is 7. Furthermore, as the value of BO (Beacon order) or SO (Superframe order) increases, the size of a time slot increases. This makes it difficult to precisely allocate bandwidth for any device, because the bandwidth is allocated by the unit of GTS. The proposed scheme of this paper can reduce the waste of BW in CFP by adaptively reducing the size of a time slot in CFP as the value of BO or SO increases and increase the number of GTSs to 127 by modifying the standard. The performance analysis shows that the proposed scheme can dramatically increase the bandwidth utilization during the CFP when comparing with IEEE 802.15.4.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.4
• /
• pp.395-402
• /
• 2002

In the conventional public switched telephone network(PSTN), there are various types of modulation that can be used in ADSL to offer fast data communication, two of which are CAP(Carrierless Amplitude Phase) and DMT(Discrete MultiTone). As we consider the current situation, DMT is getting more predominant in the market than CAP. One of the reasons is that it gives high performance in spite of its high complexity Since DMT divides the full range of bandwidth into 256 sub-channels, it can be highly adaptive in the circumstances, where the problems of attenuation and noise caused by the propagation distance are very crucial. In this paper, a new bit loading algorithm for DMT modulation is proposed. The proposed algorithm can be efficiently implemented in a way that it requires less computation than the conventional modulation techniques. In contrast to the conventional algorithms which perform sorting processing, the proposed algorithm uses look-up tables to reduce the repetition of calculation. Consequently, it is shown that less processing time and lower complexity can be achieved.

• Tuberculosis and Respiratory Diseases
• /
• v.69 no.6
• /
• pp.450-455
• /
• 2010

Background: High cortisol levels are frequently observed in patients with severe infections are of prognostic value in sepsis. The aim of this study was to evaluate the clinical usefulness of serum cortisol in assessment for the severity of community-acquired pneumonia (CAP). Methods: This study analyzed the results of 52 CAP subjects admitted in Changwon Fatima Hospital between July 2008 to May 2010. Total serum cortisol, infection markers such as C-reactive protein (CRP), procalcitonin (PCT) and CURB (Confusion, Uremia, Respiratory rate, Blood pressure)-65 were examined retrospectively. Results: In clinically unstable subjects on admission day 4, baseline serum cortisol, CURB-65, and CRP were elevated significantly compared to those of stable subjects. Area under curve (AUC) of cortisol, CRP, and CURB-65 from ROC curves were 0.847, 0.783, and 0.724 respectively. In the subjects with serum cortisol ${\geq}22.82{\mu}g/dL$, CRP, PCT, CURB-65 score, and mortality were significantly elevated. Conclusion: These findings suggest that measurement of serum cortisol in early stage may provide helpful information in the assessment of CAP severity.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.4
• /
• pp.298-309
• /
• 2020

Background: Safflower (Carthamus tinctorius L.) is a useful medicinal and oil crop in Korea. However, when safflower is cultivated, the flowering period overlaps with the rainy season, and seed maturation is poor. Therefore, this study aimed to use basic research data to develop superior varieties using agronomic characteristics and crossing method. Methods and Results: A total of 34 safflower germplasms were sown and their agronomic characteristics were investigated. Based on these investigations, the cultivar 'ui-san-hong-hwa' was selected as the mother plant, and 'Myanmar safflower' (Hsu Pan) was selected as the father plant. In addition, we developed a floret-protecting cap to cover florets after emasculation during the artificial crossing. When florets were protected by the cap, the seed setting rate increased in comparison to that in the non-covered florets. Conclusions: Agronomic characteristics can contribute to developing suitable varieties. The results suggest that the protection cap will be helpful in breeding without the floral organ drying. This study contributes an efficient breeding method to develop new safflower varieties.