• The Journal of Advanced Prosthodontics
• /
• v.13 no.4
• /
• pp.216-225
• /
• 2021

PURPOSE. The aim of this study is to evaluate the effects of canine guidance occlusion and group function occlusion on the degree of stress to the bone, implants, abutments, and crowns using finite element analysis (FEA). MATERIALS AND METHODS. This study included the implant-prosthesis system of a three-unit bridge made of monolithic zirconia and hybrid abutments. Three-dimensional (3D) models of a bone-level implant system and a titanium base abutment were created using the original implant components. Two titanium implants, measuring 4 × 11 mm each, were selected. The loads were applied in two oblique directions of 15° and 30° under two occlusal movement conditions. In the canine guidance condition, loads (100 N) were applied to the canine crown only. In the group function condition, loads were applied to all three teeth. In this loading, a force of 100 N was applied to the canine, and 200-N forces were applied to each premolar. The stress distribution among all the components of the implant-bridge system was assessed using ANSYS SpaceClaim 2020 R2 software and finite element analysis. RESULTS. Maximum stress was found in the group function occlusion. The maximum stress increased with an increase in the angle of occlusal force. CONCLUSION. The canine guidance occlusion with monolithic zirconia crown materials is promising for implant-supported prostheses in the canine and premolar areas.

• Journal of Oral Medicine and Pain
• /
• v.13 no.1
• /
• pp.85-93
• /
• 1988

The author studied maximum clenching EMG activities of temporalis anterior and masseter muscle during canine guidance and centric occlusion. It was performed before and after anesthesia of maxillary and mandibular canines. The 22 normal subjects (15 males and 7 females) who had healthy maxillary and mandibular canines were selected. Their occlusal contact scheme was canine guidance during movement and they did not have temporomandibular disorder. The results were as follows : 1. The maximum clenching EMG activities of temporalis anterior and masseter muscle during guidance were less than those during centric occlusion. 2. After left maxillary and mandibular canines were anesthetized with 2% lidocanine with 1:100,000 epinephrine, the maximum clenching EMG acivities of temporalis anterior and masseter muscle during left canine guidance were greater than those before anesthesia of left maxillary and mandibular canines(p<0.01) 3. The maximum clenching EMG activities of temporalis anterior and masseter muscle during right guidance were not significantly different between before and after anesthesia of left maxillary and mandibular canines(p>0.05).

• The Journal of Advanced Prosthodontics
• /
• v.4 no.1
• /
• pp.52-56
• /
• 2012

Conventional implant protocols required a load-free healing period of three to six months between placement and functional loading of the implants. Many efforts have been made to minimize the duration of treatment time. Several literatures have documented immediate function with provisional or definitive prosthesis within a week of the placement in response to these demands. In addition, immediate implant placement has advantages such as shortened treatment time and preservation of soft tissue architectures. This article presents immediate implant placement into fresh extraction sockets followed by functional immediate loading with provisional prosthesis on canine and premolars for a patient having canine protected occlusion.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.1
• /
• pp.45-51
• /
• 2017

PURPOSE. This study aims to investigate the effects of four different lateral occlusion schemes and different excursions on peri-implant strains of a maxillary canine implant. MATERIALS AND METHODS. Four metal crowns with different occlusion schemes were attached to an implant in the maxillary canine region of a resin model. The included schemes were canine-guided (CG) occlusion, group function (GF) occlusion, long centric (LC) occlusion, and implant-protected (IP) occlusion. Each crown was loaded in three sites that correspond to maximal intercuspation (MI), 1 mm excursion, and 2 mm excursion. A load of 140 N was applied on each site and was repeated 10 times. The peri-implant strain was recorded by a rosette strain gauge that was attached on the resin model buccal to the implant. For each loading condition, the maximum shear strain value was calculated. RESULTS. The different schemes and excursive positions had impact on the peri-implant strains. At MI and 1 mm positions, the GF had the least strains, followed by IP, CG, and LC. At 2 mm, the least strains were associated with GF, followed by CG, LC, and IP. However, regardless of the occlusion scheme, as the excursion increases, a linear increase of peri-implant strains was detected. CONCLUSION. The peri-implant strain is susceptible to occlusal factors. The eccentric location appears to be more influential on peri-implant strains than the occlusion scheme. Therefore, adopting an occlusion scheme that can reduce the occurrence of occlusal contacts laterally may be beneficial in reducing peri-implant strains.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.189-200
• /
• 1989

The purpose of this study was to investigate the muscle activity of the group function occlusion and the changed canine guided occlusion using EM2. In this study, 13 subjects with group function occlusion and without temporomandibular disorders were selected, each subject was changed to the canine guided occlusion by forming the lingual ramps in the upper canines with light curing composite resin. The muscle activities of the anterior temporal and masseter muscle were recorded in the group function occlusion and immediately, one week, and two weeks after changing to the canine guided occlusion under the condition of maximum voluntary clenching in centric occlusion, lateral excursion, and during gum chewing. The results were as follows: 1. In case of maximum voluntary clenching in centric occlusion, the muscle activities of the anterior temporal and masseter muscle of working and balancing side didn't show any difference immediately after changing to the canine guided occlusion, one week after changing to the canine guided occlusion, one week after changing to it the muscle activities of the anterior temporal masseter muscle of working and balancing side were increased significantly, and two weeks after changing to it the muscle activities of the masseter muscle were increased significantly in comparison with the group function occlusion. 2. In case of maximum voluntary clenching in lateral excursion, the muscle activities of the anterior temporal and masseter muscle of working and balancing side were reduced significantly immediately after changing to the canine guided occlusion, one week after changing to it the muscle activities of the anterior temporal muscle of balancing side and of the anterior temporal and masseter muscle of working side were reduced significantly, and 2 weeks after changing to it the muscle activities of the anterior temporal and masseter muscle of working side were reduced significantly in comparison with the .group function occlusion. 3. During gum chewing, the muscle activities of the anterior temporal and masseter muscle of working and balancing side didn't show any difference immediately after changing to the canine guided occlusion, one week after changing to it the muscle activities of the masseter muscle of working and balancing side were increased significantly, and two weeks after changing to it only the muscle activities of masseter muscle of working side were increased significantly.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.565-579
• /
• 1993

This study was accomplished to analyse and compare the occlusal contact patterns during eccentric mandibular movements in adult with normal occlusion. 50 subjects(male 27, female 23), who had natural occlusion and no symptom of temporomandibular disorder, were selected. Teeth contact patterns during mandibular eccentric movements were recorded and the distribution of tooth contacts in maximum intercuspation analysed by T-scan system. And then, tooth contact numbers recored by T-scan and silicone bite registration at centric occlusion were analysed and compared. The results obtained were as follows : 1. Antero-posteriorly, the qualitative center of occlusal contacts in centric occlusion were in the first molar areas, but there was a slight deviation in left-right directions. Thus, distribution of occlusal contacts were not bilaterally symmetric. 2. During the mandibular movements from centric occlusal position to right lateral and left lateral directions, the frequency that maxillary canine joined in lateral guidance was relatively high, but pure canine protected occlusion or pure group function occlusion had small frequency. 3. During mandibular protrusive movement, one or more maxillary central incisors frequently joined in protrusive guidance. 4. During mandibular eccentric movements, working and balancing side premature contact was observered in relatively high frequency. 5. In centric occlusal position, the numbers of occlusal contacts recorded on T-scan were relatively smaller than on silicone bite registration.

• Restorative Dentistry and Endodontics
• /
• v.37 no.3
• /
• pp.180-184
• /
• 2012

Traumatic injuries of the face often involve root fractures especially in anterior teeth. The prognosis and the treatment of the root fracture depend on the extent of the fracture line, general health and patient compliance. This case report outlines a new conservative trial treatment modality to stabilize the maxillary central incisors with horizontal root fracture on the cervical to middle third by fabricating canine guidance to remove loading on the traumatized maxillary central incisors during eccentric movements and thus inducing spontaneous healing of the fractured line between the fragments. Radiographs after thirty months showed adequate healing with no signs of pathological changes including root resorption, ankylosis or displacement. Long term follow-up revealed that vitality, stability and aesthetics were maintained and the patient was satisfied with the outcome.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.59-68
• /
• 2013

The objective of this study was to analyze occlusal contact pattern of 33 young adult males with normal occlusion during lateral excursion using T-scan III system which can measure the dynamic occlusion. Occlusal contact patterns were examined and categorized in non-working side disclusion point(more functionally acceptable position) not canine-to-canine position. Disclusion time, occlusal force, and occlusal force distribution ratio of upper canine at disclusion point during lateral excursion movement was also measured and compared among the groups divided according to contact patterns. The results showed that group function was clearly more dominant than canine guidance and other occlusal contact patterns different with existing patterns were found. There were significantly difference between groups in variables of T-scan measurement. T-scan III system is effective tools to analyze and evaluate occlusal contact patterns, disclusion time, occlusal force, and occlusal force distribution ratio of upper canine at disclusion point.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.543-549
• /
• 2005

The maxillary canine is especially important as it has the longest root, provides guidance for lateral movement of the mandible and masticatory function and is a key in esthetics due to its position. Maxillary canine has the longest time to develop and a complex route from the place of formation to the site of eruption, and so it is prone to impaction more than other teeth. The clinician should consider the various treatment options : (a) No treatment and observation, (b) surgical exposure and orthodontic traction (c) autotransplantation (d) extraction. Surgical exposure of the canine and orthodontic treatment to bring the tooth into the line of occlusion is considered the most desirable approach. This case presents the results of treatment for impacted maxillary canine by surgical exposure and orthodontic tooth movement.

• Journal of Veterinary Clinics
• /
• v.29 no.6
• /
• pp.498-501
• /
• 2012

A 10-month-old intact male Maltese dog (body weight, 1.6 kg) presented with intermittent cough and abnormal heart sounds. The dog was diagnosed with a left-to-right patent ductus arteriosus (PDA) on the basis of the results of transthoracic echocardiography, color flow Doppler examination, and angiography. Transcatheter occlusion of the PDA was performed using the $Amplatz^{(R)}$ Canine Duct Occluder (ACDO) via the femoral artery. The device was placed under fluoroscopic guidance and successfully occluded the PDA. The continuous heart murmur disappeared immediately after the correction and no residual flow was detected. The dog was discharged the following day and regularly examined for complications and safety. This is the first report demonstrating the clinical application of ACDO for the transcatheter closure of PDA via the femoral artery in a small-breed dog in Korea.