• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.6
• /
• pp.445-453
• /
• 2016

Fixed robust routing is attracting attention as routing that achieves high robustness against changes in traffic patterns without conducting traffic measurement and performing dynamic route changes. Fixed robust routing minimizes the worst-case maximum link load by distributing traffic of every source-destination (s-d) router pair onto multiple candidate paths (multipath routing). Multipath routing, however, can result in performance degradation of Transmission Control Protocol (TCP) because of frequent out-of-order packet arrivals. In this paper, we first investigate the influence of multipath routing on TCP performance under fixed robust routing with a simulation using ns-2. The simulation results clarify that TCP throughput greatly degrades with multipath routing. We next propose a candidate path selection method to improve TCP throughput while suppressing the worst-case maximum link load to less than the allowed level under fixed robust routing. The method selects a single candidate path for each of a predetermined ratio of s-d router pairs in order to avoid TCP performance degradation, and it selects multiple candidate paths for each of the other router pairs in order to suppress the worst-case maximum link load. Numerical examples show that, provided the worst-case maximum link load is less than 1.0, our proposed method achieves about six times the TCP throughput as the original fixed robust routing.

• Journal of the Korean Statistical Society
• /
• v.35 no.3
• /
• pp.261-280
• /
• 2006

We have developed a new model selection criteria, the partial intrinsic Bayes factor, which is designed for cases when we select a model among a small number of candidate models. For example, we can choose only a few candidate models after exploring scatter plots. By simulation study, we have showed that PIBF performs better than AIC, BIC and GCV.

• Communications for Statistical Applications and Methods
• /
• v.22 no.2
• /
• pp.173-180
• /
• 2015

We propose a selection procedure of principal components in principal component regression. Our method selects principal components using variable selection procedures instead of a small subset of major principal components in principal component regression. Our procedure consists of two steps to improve estimation and prediction. First, we reduce the number of principal components using the conventional principal component regression to yield the set of candidate principal components and then select principal components among the candidate set using sparse regression techniques. The performance of our proposals is demonstrated numerically and compared with the typical dimension reduction approaches (including principal component regression and partial least square regression) using synthetic and real datasets.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.29-36
• /
• 2006

In the process of location selection, it is assumed that transformer substation socially recognized as a dangerous facility require especially more rigorous and resonable process. This paper implements suitability analysis for optimum location selection of transformer substation in southern Gyeonggi province using AHP(Analytic Hierarchy Process) and spatial analysis of GIS in terms of safety, national land use, economical efficiency and environment preservation. To do this, necessary data from 1/5,000 digital map are extracted a s raster format for suitability analysis and a field investigation also was done. In the procedure of site selection, three candidate zones with 1.5km radius were selected for the whole research area and then through field survey low transformer sites were selected from candidate zones. In the last the appropriateness of selected sites was evaluated. The results of the suitability analysis showed that the first candidate site satisfied the location condition best and other candidate sites generally showed good location condition.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.953-966
• /
• 2023

As the importance of renewable energy diffusion spreads, promotion of sustainable renewable energy projects such as agrivoltaics is expected to accelerate. Furthermore, to promote agrivoltaics projects, it must be considered the legislation related to agrivoltaics and Chungnam Province's local policy. This research focuses on the selection of the most suitable sites for agrivoltaics installations in Chungnam Province in South Korea. Therefore, the process of this research was as follows. First, the legislation related to agrivoltaics and local policy in Chungnam Province were identified. Second, it employs an analytic hierarchy process (AHP) to consider important criteria and their weights for site selection. Third, based on the weights calculated AHP, geographic information system (GIS) was performed to select most suitable location selection of agrivoltaics installations in Chungnam Province. The analysis identified approximately 60 promising most suitable location for agrivoltaics installations in Chungnam Province, primarily in the northern part of Chungnam Province. These areas are expected to meet electricity demands in nearby regions since these are relatively adjacent to Gyeonggi Province. According to the results of research, policy suggestions related to agrivoltaics were presented separately into the agricultural sector and the electricity power sector. The study's results serve as a valuable resource for future national-level candidate site selection for agrivoltaics projects.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.59-64
• /
• 2010

This study is to determine an optimal marina's construction location candidate among many alternative candidates in order to obtain the maximized efficiency under the natural conditions. To deal with marina's construction location, the optimal construction location is selected using 10 important factor analysis for 10 candidates in Yeosu city. In this paper, the new model to assign the most reasonable alternative is introduced using 0-1 integer programming. This proposed model has not been applied in the optimal marina's facility candidate selection problem yet. This paper will contribute to determine the most reasonable alternative. Also, this proposal model can be applied to other marina's facility candidate selection problem in other regions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.2
• /
• pp.149-153
• /
• 2017

Objective: This study was to determine the relationship between estimated breeding value and phenotype information after farrowing when juvenile selection was made in candidate pigs without phenotype information. Methods: After collecting phenotypic and genomic information for the total number of piglets born by Landrace pigs, selection accuracy between genomic breeding value estimates using genomic information and breeding value estimates of best linear unbiased prediction (BLUP) using conventional pedigree information were compared. Results: Genetic standard deviation (${\sigma}_a$) for the total number of piglets born was 0.91. Since the total number of piglets born for candidate pigs was unknown, the accuracy of the breeding value estimated from pedigree information was 0.080. When genomic information was used, the accuracy of the breeding value was 0.216. Assuming that the replacement rate of sows per year is 100% and generation interval is 1 year, genetic gain per year is 0.346 head when genomic information is used. It is 0.128 when BLUP is used. Conclusion: Genetic gain estimated from single step best linear unbiased prediction (ssBLUP) method is by 2.7 times higher than that the one estimated from BLUP method, i.e., 270% more improvement in efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.7
• /
• pp.1252-1273
• /
• 2011

In Web Service Composition (WSC) area, services selection aims at selecting an appropriate candidate from a set of functionally-equivalent services to execute the function of each task in an abstract WSC according to their different QoS values. In despite of many related works, few of previous studies consider transactional constraints in QoS-aware WSC, which guarantee reliable execution of Composite Web Service (CWS) that is composed by a number of unpredictable web services. In this paper, we propose a novel global selection-optimal approach in WSC by considering both transactional constraints and end-to-end QoS constraints. With this approach, we firstly identify building rules and the reduction method to build layer-based Directed Acyclic Graph (DAG) model which can model transactional relationships among candidate services. As such, the problem of solving global optimal QoS utility with transactional constraints in WSC can be regarded as a problem of solving single-source shortest path in DAG. After that, we present Graph-building algorithms and an optimal selection algorithm to explain the specific execution procedures. Finally, comprehensive experiments are conducted based on a real-world web service QoS dataset. The experimental results show that our approach has better performance over other competing selection approaches on success ratio and efficiency.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.208-219
• /
• 2023

Recently, as mega-urbanization progresses, urban logistics centered on large cities is growing rapidly, and logistics transportation is increasing due to the lack of logistics infrastructure and the operation of a delivery system using cargo trucks in the city center. being cited as a cause. In order to solve this problem, domestic researchers are conducting research on the development of " Urban Underground railway Logistics System" that minimizes the initial infrastructure construction cost by utilizing the existing urban railway facilities in the city. Therefore, this paper analyzed the usage environment of the actual urban railway station to which the system will be applied in order to derive candidates for the test bed selection of "Urban Underground railway Logistics System". The evaluation criteria for test bed candidate role selection were established, and the candidate group derived from the Brown & Gibson model was used to evaluate the candidate group and derive the candidate role. A review of the results was conducted to contribute to the establishment of a test bed for the " Urban Underground railway Logistics System" under development.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.587-612
• /
• 2014

Objectives: There is requirement to select candidate materials for chronic inhalation/carcinogenicity testing, so we would like to set the priority of candidate materials. Methods and Results: We recommend the priorities for candidate materials based on the chemicals stipulated in the Occupational Safety and Health Act(OSHAct) and the Toxic Chemicals Control Act(TCCA) in Korea. Conclusions: We presented candidate chemicals consisting of solids(powders), gases and liquids(Such as organic solvents) with priorities.