• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.263-271
• /
• 2010

SIP/RTP-based VoIP services are being popular. Recently, however, VoIP anomaly traffic such as delay, interference and termination of call establishment, and degradation of voice quality has been reported. An attacker could intercept a packet, and obtain user and header information so as to generate an anomaly traffic, because most Korean VoIP applications do not use standard security protocols. In this paper, we propose three VoIP anomaly traffic generation methods for CANCEL;BYE DoS and RTP flooding, and a detection method through flow-based traffic measurement. From our experiments, we showed that 97% of anomaly traffic could be detected in real commercial VoIP networks in Korea.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.1
• /
• pp.15-23
• /
• 2001

In this paper, we propose a system to cancel the multi-user interference of synchronous BPSK DS/CDMA systems. In this CDMA scheme, the spectrum of the user's signal is directly spread by means of the Simplex code or the phase offsetted PN code. But in arbitrary bit interval, we use the one spreading code of the Simplex code and the phase offsetted PN code. The receiver cancel the multi-user interference and demodulate information bits by using reference correlator. This paper presents a interference cancellation model and analyzes this system mathematically. The suggested system show that the interference resulting from other users are remarkably reduced. In AWGN and Nakagami fading environment we analyze interference generated from other users and compare the resulting performance with that of the conventional receiver in same user side.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.967-975
• /
• 1998

This paper presents a system to cancel the multi-user interference of synchronous DS/CDMA systems by using the estimation circuit and the reference correlator. In the code-division multiple access(CDMA) scheme, the spectrum of the user's signal is directly spreaded by means of the Simplex coed or the phase offsetted PN code. It is interesting for the Simplex code and the PN code to have a similar correalation property. It these codes are used in DS/CDMA systems, the number of acceptable users can be increased in comparison with conventioal DS/CDMA systems. This thesis presents a interference cancellation model to cancel the multi-use interference in DS/CDMA systems by using Simples code of PN code as a spreading sequence. In AWGN environment, we analyze interference generated from other users and compare the resulting performance with that of the conventioanl receiver in same user side.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9C
• /
• pp.1219-1226
• /
• 2004

The objective of this paper is to proposed a new Hybrid Interference Cancellation(HlC) receiver to cancel MAI in a multirate DS-CDMA system based on multiple processing gain(MPG). We propose a new improved HIC scheme that divides the active users with different data rates split into a number of groups for effectives cancellation Between each group, GW-PIC is performed to cancel other group signals and within them, SIC is carried out to remove multiple access interference in group. We analyze the performance of the proposed receiver in terms of the bit error rate(BER) and examine its performance. As a conclusion, computer simulations show that the proposed schemes outperforms adaptive multistage PIC and conventional SIC receiver over AWGN channel.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.47
• /
• pp.49-78
• /
• 2010

The seller has to deliver goods and hand over documents as required by the contract. It is very important that ownership of goods shall be transferred by the documents from the seller to the buyer. Where terms of payments is made under documentary payment such as negotiable order Bill of lading or any transport documents for symbolic delivery of goods shall be more important between the parties concerned. The buyer may withdraw or cancel the contract where the buyer accept the foul Bill of Lading and demand damages where the buyer accept the other documents which are not in accordance with requirements by the buyer. Withdraw or cancel of contract can be made where discrepancy of documents comes into fundamental breach of contract. In conclusion transport documents by the seller will be used to determine appropriation of transport document to the contract. Therefore the seller has to deliver the proper shipping documents to the buyer. Where the breach of the seller's obligations to deliver documents the buyer has the right of requiring performance, contract avoided, claiming damage to recover the contract under CISG. The significance of transport documents has been focused in this study and careful examination of documents shall be needed to prevent any dispute or differences between the parties.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.95-105
• /
• 1997

In this paper, we have studied about design and fabrication of the actively shielded superconducting MRI magnet. Nonlinear optimization methods are usually used to find optimum coil configurations. However the selection of initial coil configurations is very difficult. In case bad initial data are used, it is even impossible to find optimum coil configurations which satisfy predefined constraints. We have developed computer optimization program which consists of two steps. Initial coil configurations are easily selected through linear optimization in the first step and optimum coil configurations are found through nonlinear optimization in the second step. We have also studied about superconducting shim coils to cancel error fields caused by coil fabrication errors. Many researchers published design concepts of shim coil. However all these studies are for shim coil design using filamentary coils with single turn, Shim coils with multi-turns should be used to produce enough field strength to cancel error fields. We have developed computer program for the design of shim coils which have proper thickness and length. An actively shielded superconducting MRI magnet with a small warm bore was fabricated and four sets of superconducting shim coils were equipped. The magnetic field distributions were measured and field correction was carried out using shim coils.

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1326-1335
• /
• 2019

Common mode (CM) chokes are a crucial part in EMI filters for mitigating the electromagnetic interference (EMI) of switched-mode power supplies (SMPS) and for meeting electromagnetic compatibility standards. However, the parasitic capacitances of a CM choke deteriorate its high frequency filtering performance, which results in increases in the design cycle and cost of EMI filters. Therefore, this paper introduces a negative capacitance generated by a negative impedance converter (NIC) to cancel the influence of equivalent parallel capacitance (EPC). In this paper, based on a CM choke equivalent circuit, the EPCs of CM choke windings are accurately calculated by measuring their impedance. The negative capacitance is designed quantitatively and the EPC cancellation mechanisms are analyzed. The impedance of the CM choke in parallel with negative capacitances is tested and compared with the original CM choke using an impedance analyzer. Moreover, a CL type CM filter is added to a fabricated NIC prototype, and the insertion loss of the prototype is measured to verify the cancellation effect. The prototype is applied to a power converter to test the CM conducted noise. Both small signal and EMI measurement results show that the proposed technique can effectively cancel the EPCs and improve the CM filter's high frequency filtering performance.

• The KIPS Transactions:PartD
• /
• v.13D no.5 s.108
• /
• pp.709-716
• /
• 2006

As the software complexity increases, the development success rate decreases and failure rate increases exponentially. The failure rate related to the software size can be described by a growth function. Based on this phenomenon, this paper estimates the development success and completion rate using the Gompertz growth function. At first, we transformed a software size of numerically suggested $10^n$ into a logarithm and kept the data interval constantly. We tried to derive a functional relationship between the development success rate and the completion rate according to the change of logarithmic software size. However, we could not find a function which can represent this relationship. Therefore, we introduced the failure rate and the cancel rate which are inverse to the development success rate and completion rate, respectively. Then, we indicated the relation between development failure rate and cancel rate based on the change of software size, as a type of growth function. Finally, as we made the Gompertz growth function with the function which describes the cancel rate and the failure rate properly. We could express the actual data suitably. When you apply the growth function model that I suggested, you will be able to get the success rate and completion rate of particular site of software very accurately.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.500-503
• /
• 2002

Biomedical signals are ubiquitously contaminated and degraded by background noise which span nearly all frequency bandwidths. This paper proposes the MADF (multiplication free adaptive digital filter) algorithm to cancel the noise. And the convergence characteristics of the algorithm is analyzed. In the experimental results, the MADF algorithm has the advantage in which has superior to a condition of low-frequency and slow data speed. This application gives an important significance in ensuring the objectivity of clinical information and in promoting the representation and the disease diagnosis.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.345-348
• /
• 2000

In this paper, A Feedforward Linear Power Amplifier for IMT-2000 which IMD characteristics was improved was designed and fabricated. To improve the main power amplifier IMD characteristics, the Feedback loop was added to basic Feedforward Power Amplifier structure. Therefore, the output power of error amplifier can be reduced, and it is easy to control the linearization circuit to cancel total IMD. The designed power amplifier represented the 40㏈m(l0W) output power and -55㏈C 3rd IMD at Center frequency 2.14㎓ (@5㎒).