• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.385-392
• /
• 2005

The purpose of this study was to observe the effect of canal filling on the bacteria left in the dentinal tubules and to compare the sealing ability between Gutta-percha and Resilon. The bovine dentin block models were prepared E. faecalis was inoculated to dentin blocks and incubated. The dentin blocks were divided into 5 groups. Group 1 was the negative control. Group 2 was the positive control. Group 3 was filled with ZOE based sealer and Gutta-percha, Group 4 with resin based sealer and Gutta-percha, and Group 5 with resin based sealer and Resilon. After 24 hour, the blocks were incubated at $37^{\circ}C$ for 1, 2, 3 and 4 weeks on BHI agar plates. The internal dentin portion of the blocks was removed using ISO 027, 029, 031, 035 round burs and the dentin chips were incubated at $37^{\circ}C$ for 24 hour Following incubation, the optical density of the medium was measured. The data were statistically analysed using repeated measures ANOVA and one-way ANOVA. The results were as follows, 1. There. was statistically significant reduction in the number of E. faecalis of the group where dentinal tubules were completely sealed with nail varnish in comparison with the groups obturated with gutta-percha or resilon (p < 0.05). 2. In group 5, the number of E. faecalis in the dentinal tubules decreased significantly with time (p < 0.05). whereas in Group 3 and 4, there was no reduction in its number (p > 0.05). 3. Under the conditions of this experiment, E. faecalis survived up to 4 weeks after obturation with gutta-percha or resilon (p > 0.05).

• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.682-689
• /
• 1998

The purpose of this study was to evaluate the sealing ability of the Microseal$^{(R)}$, which was new obturation system made by Tycom company, U.S.A. Forty-five extracted single-rooted human teeth were resected at cemento-enamel junction and divided three groups. All canals were prepared using Profile system, and then each group was obturated by lateral condensation technique (group 1), vertical condensation technique (group 2) and Microseal$^{(R)}$ condensation technique (group 3) with root canal sealer. Teeth were immersed in resorcinol-formaldehyde resin for 5 days at $4^{\circ}C$ and the resin was allowed to polymerize completely for 4 days at room temperature. Teeth were resected horizontally at 1 mm (level I), 2 mm (level II), 3 mm (level III) from the anatomical root apex using low speed microtome and examined with Image analyzer (IBASR, Zeiss co., Germany.) at ${\times}25$ magnification. The gab between the canal wall and the filling material, which was filled with the resin, was measured at each of the three levels. Each ratio of leakage was expressed percentage by calculating the ratio of the area of the resin to the total area of the canal and was analyzed statistically (one-way ANOVA). The results were as follows; 1. The mean ratio of leakage (%) was 6.46% at group 1, 3.06% at group 2, 11.27% at group 3. 2. When evaluating the ratio of leakage at the three levels, there was level I> level II> level III in all groups. Especially, the difference between level I and level III was statistically significant (p<0.05). 3. When evaluating the ratio of leakage at the three groups, there was group 3> group 1> group 2 at all levels. Especially the difference between group 2 and group 3 was statistically significant (p<0.05).

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.515-524
• /
• 1998

The purposes of this study were to observe the cavity wall morphology and to evaluate the degree of cavity cleanliness when root-end retrograde cavity preparation was done with ultrasonic diamond instruments. To observe the morphology of retrocavity and to evaluate the degree of cavity cleanliness. root-end resections were done on 20 palatal roots of extracted maxillary first molars after canal filling with gutta-percha. Retrocavities were prepared using either ultrasonic diamond instruments or stainless steel ones of medium power setting of level 6 ($Miniendo^{TM}$, EIE, CA, U.S.A.). Morphology of the cavity. degrees of the remaining canal debris and smear layer were evaluated under the scanning electron microscope. The results were as follows: Cavities prepared with ultrasonic diamond instruments showed scratched appearance of wall, while ultrasonic stainless steel preparation showed hatcheted appearance. Ultrasonic diamond instruments induced more smear layer than stainless steel ones did (p<0.01) in the cavity. However, there was no significant difference in canal debris (p>0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.518-524
• /
• 1994

A traumatically intruded tooth is one that is forcefully and abruptly dispaced from its position into the surrounding alveolar bone. Although intrusion of permanent teeth is infrequent, the sequelae compromise the longevity of the tooth and often include pulp necrosis, internal and external root resorption, rupture of periodontal ligament and loss of marginal bone. The purpose of this study was to examine three common management techniques for traumatic intrusion, observation for re-eruption, surgical repositioning & fixation and orthodontic extrusion. In the recent, the accepted treatment was to allow the permanent teeth to reerupt spontaneously for 6-8 weeks. If this did not occur, orthodontic traction was applied. The pulpal status of the teeth was monitored and either calcium hydroxide therapy or conventional endodontics was instituted following pulpal necrosis depending on the maturity of the root end. Pulpectomy and a calcium hydroxide filling were also the treatment of choice if there was evidence of internal or external root resorption. This will reduce the chance of root resorption and provide a period of monitoring prior to a definitive root canal filling.

• Restorative Dentistry and Endodontics
• /
• v.45 no.1
• /
• pp.5.1-5.8
• /
• 2020

Objectives: The obturation quality of MTA, Biodentine, Total Fill BC root canal sealer (RCS), and warm gutta-percha (WGP) in teeth with simulated internal root resorption (IRR) was evaluated by using micro-computed tomography. Materials and Methods: Standardized IRR cavities were created using 40 extracted maxillary central incisor teeth and randomly assigned into 4 groups (n = 10). IRR cavities were filled with MTA, Biodentine, Total Fill BC RCS (bulk-fill form) and WGP + Total Fill BC RCS. Percentage of voids between resorptive cavity walls and obturation material (external void), and inside the filling materials (internal voids) were measured. Results: Total Fill BC sealer in the bulk-fill form presented significantly highest values of external and internal void percentages (p < 0.05). Biodentine showed a significantly lowest external void percentage (p < 0.05). WGP + Total Fill BC RCS presented significantly lower values of internal void percentages than all groups (p < 0.05), except Biodentine (p > 0.05). Conclusion: None of the filling materials were created void-free obturation in resorption cavities. Biodentine may favor its application in teeth with IRR over Angelus MTA and bulkfill form of Total Fill BC.

• Korean Journal of Dental Materials
• /
• v.46 no.1
• /
• pp.1-10
• /
• 2019

There are several causes of tooth discoloration following root canal treatment. In this study, we evaluated the effects of sealers on tooth discoloration and internal bleaching. Twenty-four teeth were divided into 4 groups: control group, AH plus, Endosequece BC, and MTA fillapex group. Root canal filling was performed using each sealer conventionally and non-vital bleaching was performed with sodium perborate. The L, a, and b values were measured using Vita easyshade. Tooth discoloration after root canal treatment occurs irrespective of the type of sealers and may cause discoloration with only gutta-percha cone. The effect of non-vital bleaching following the use of calcium silicate-based sealers such as Endosequece BC and MTA fillapex was higher than that of AH plus. Therefore, it needs careful use of sealers in endodontics and calcium silicate-based sealers have advantages of bleaching in case of discolored tooth.

• Restorative Dentistry and Endodontics
• /
• v.48 no.1
• /
• pp.8.1-8.8
• /
• 2023

Objectives: This study was designed to evaluate the parameters of bonding performance to root dentin, including push-out bond strength and dentinal tubular biomineralization, of a hydraulic bioceramic root-end filling material premixed with dimethyl sulfoxide (Endocem MTA Premixed) in comparison to a conventional powder-liquid-type cement (ProRoot MTA). Materials and Methods: The root canal of a single-rooted premolar was filled with either ProRoot MTA or Endocem MTA Premixed (n = 15). A slice of dentin was obtained from each root. Using the sliced specimen, the push-out bond strength was measured, and the failure pattern was observed under a stereomicroscope. The apical segment was divided into halves; the split surface was observed under a scanning electron microscope, and intratubular biomineralization was examined by observing the precipitates formed in the dentinal tubule. Then, the chemical characteristics of the precipitates were evaluated with energy-dispersive X-ray spectroscopic (EDS) analysis. The data were analyzed using the Student's t-test followed by the Mann-Whitney U test (p < 0.05). Results: No significant difference was found between the 2 tested groups in push-out bond strength, and cohesive failure was the predominant failure type. In both groups, flake-shaped precipitates were observed along dentinal tubules. The EDS analysis indicated that the mass percentage of calcium and phosphorus in the precipitate was similar to that found in hydroxyapatite. Conclusions: Regarding bonding to root dentin, Endocem MTA Premixed may have potential for use as an acceptable root-end filling material.

• The Journal of the Korean dental association
• /
• v.54 no.8
• /
• pp.658-665
• /
• 2016

Treatment of immature permanent teeth with irreversibly damaged pulp has been challenging in dental practice because of the lack of apical constriction, thin dentinal walls, and short roots. This may lead to the extrusion of filling materials, and fracture of the root due to its more fragile feature during shaping of the root canal. Apexification with calcium hydroxide or MTA is one of the treatment options for these cases. Although favorable results of apexification have been reported, these treatment procedures do not guarantee the increase of root length and/or width even after a long term period. Thus, treated teeth are still prone to fractures. Recently, pulp revascularization has been proposed as an alternative treatment for immature teeth with necrotic pulp and periapical pathosis. Pulp revascularization allows the stimulation of the apical development and the root maturation. There have been many treatment protocols using various materials such as antibiotics and calcium hydroxide medicament. In this case report, literature review about pulp revascularization and two related cases are presented.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.2
• /
• pp.422-427
• /
• 1997

In the Pediatric Dentalc profession the occurrence rate intrusion of young permanent teeth is rather low, and the treatment method varies from one another. Intrusion of the teeth bring complications to the pulp and periodontal ligament, and thus the possibility of endodontic treatment increases. For the formation of calcific barriers, calcium hydroxide is used in young permanent teeth and this makes the final canal filling possible. In this case report, we will show two cases of young permanent teeth intrusion and the treatment methods to help assess the recognition of treatment for young permanent teeth intrusion.

• Restorative Dentistry and Endodontics
• /
• v.43 no.4
• /
• pp.39.1-39.20
• /
• 2018

Magnetic resonance imaging (MRI) is an advanced diagnostic tool used in both medicine and dentistry. Since it functions based on a strong uniform static magnetic field and radiofrequency pulses, it is advantageous over imaging techniques that rely on ionizing radiation. Unfortunately, the magnetic field and radiofrequency pulses generated within the magnetic resonance imager interact unfavorably with dental materials that have magnetic properties. This leads to unwanted effects such as artifact formation, heat generation, and mechanical displacement. These are a potential source of damage to the oral tissue surrounding the affected dental materials. This review aims to compile, based on the current available evidence, recommendations for dentists and radiologists regarding the safety and appropriate management of dental materials during MRI in patients with orthodontic appliances, maxillofacial prostheses, dental implants, direct and indirect restorative materials, and endodontic materials.