• 한국통신학회논문지
• /
• 제37C권9호
• /
• pp.757-762
• /
• 2012

일반적으로 보통의 카메라는 초당 24 프레임을 갖는다. 이런 카메라를 가지고는 초당 1000m에 가까운 스피드를 가지는 총알을 촬영하기 어렵다. 하지만 볼록거울을 사용하면 스테레오그래픽 투영방법에 의해 긴 길이를 짧은 화면에 담을 수 있다. 대부분 고속 물체를 촬영하기 위해서는 초당 프레임이 보통 카메라의 몇 배에 달하는 카메라를 사용하거나 전자장비를 사용하여 여러 개의 카메라를 매우 작은 시간차를 두고 촬영하는 방법을 사용한다. 본 논문에서는 보통의 카메라와 볼록거울을 사용하여 야간 사격훈련용 예광탄 탄도 모니터링 시스템을 제안하며 250m 사격장에서 표적에 명중한지 아니한지 발견 가능함을 보였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.737-747
• /
• 2011

5678SMRT has installed various sensor for operating conditions(field of electric, facilities, signal, communication equipment and track) and environment of Every Function Room for remotely detecting and monitoring. Installed sound sensor for analyzed after remotely heard the noise of every equipment at Every Function Room and temperature sensor for check the temperature condition of Every Function Room. Additional installed voltage sensor in signal equipment room for monitoring RF track-circuit's voltage condition. Installed displacement sensor at The Chungdam bridge's railway for measuring and monitoring track displacement caused by temperature change and Pan/Tilt camera at sub-station and drainage for remotely field monitoring. Installed sensor for each equipment's operating condition and failure at Every Function Room then periodic check of workforce turned to around-the-clock surveillance by sensor therefore improvement of operating equipment. SMRT is lots of prevent a failure by Immediately detect of precondition of equipment failure by analyzed the sensor data. If the occurrence of an failure, become detected Immediately so possibility correct diagnosis and order by remotely field check by installed camera and sound sensor at field.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.224-228
• /
• 2004

In these days, as it frequently happens that water level in the river exceeds the design floods due to irregular heavy rainfall, so it is required, first of an, to manage with railroad bridge safely. Because train control criterion under heavy rainfall is still not prepared and automatic flood monitoring system for railroad bridges is not used, worry over invisible economic loss due to train passage delay is in existence. Therefore, it is important to secure the safety and detect the risk like turnover or failure of railroad bridges through systematic disaster prevention system. And the transition from conventional monitoring method to real time monitoring method supported by sensors and communication system with high technology is rapidly needed. This research is on developing the real time flood monitoring system which prevents railroad disasters in advance by detecting continuously the water level of railroad bridge through CCD camera and water level gauge.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.449-452
• /
• 2005

For home networking system with a function of air quality monitoring, a wireless sensor module with several air quality monitoring sensors was developed for indoor environment monitoring system in home networking. The module has various enlargements for various kinds of sensors such as humidity sensor, temperature sensor, CO2 sensor, flying dust sensor, and etc. The developed wireless module is very convenient to be installed on the wall of a room or office, and the sensors in the module can be easily replaced due to well designed module structure and RF connection method. To reduce the system cost, only one RF transmission block was used for sensors' signal transmission to 8051 microcontroller board in time sharing method. In this home networking system, various indoor environmental parameters could be monitored in real time from RF wireless sensor module. Indoor vision was transferred to client PC or PDA from surveillance camera installed indoor or desired site. Web server using Oracle DB was used for saving the visions by web-camera and various data from wireless sensor module.

• 한국지형학회지
• /
• 제25권1호
• /
• pp.67-80
• /
• 2018

This study used aerial and terrestrial images to build a three-dimensional model of cliffs located in Pado beach using SfM (Structure from Motion) techniques. Using both images, the study purposed to reduce the shadow areas that were found when using only aerial images. Accuracy of the two campaigns was assessed by root mean square error, and monitored by M3C2 (Multiscale Model to Model Cloud Comparison) method. The result of the M3C2 in closed areas such as sea cave and notch did not express the landforms partly. However, eroded debris on sea cliffs were detected as eroded area by M3C2, as well as in captured pictures by multi-camera. The result of this study showed the applicability of multi-camera and SfM in monitoring changes of sea cliffs.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2873-2878
• /
• 2023

The purpose of this study is to perform radiation monitoring by acquiring gamma images and real-time optical images for ^99mTc vial source using charge couple device (CCD) cameras equipped with the proposed compact gamma camera. The compact gamma camera measures 86×65×78.5 mm³ and weighs 934 g. It is equipped with a metal 3D printed diverging collimator manufactured in a 45 field of view (FOV) to detect the location of the source. The circuit's system uses system-on-chip (SoC) and field-programmable-gate-array (FPGA) to establish a good connection between hardware and software. In detection modules, the photodetector (multi-pixel photon counters) is tiled at 8×8 to expand the activation area and improve sensitivity. The gadolinium aluminium gallium garnet (GAGG) measuring 0.5×0.5×3.5 mm³ was arranged in 38×38 arrays. Intrinsic and extrinsic performance tests such as energy spectrum, uniformity, and system sensitivity for other radioisotopes, and sensitivity evaluation at edges within FOV were conducted. The compact gamma camera can be mounted on unmanned equipment such as drones and robots that require miniaturization and light weight, so a wide range of applications in various fields are possible.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.200-202
• /
• 2004

This paper deals with the real-time monitoring and control system using PC, PDA(Win CE embedded device) and PCS(based BREW platform). The camera attached to the server captures the moving target, and the captured frame of color image is encoded in JPEG for image compression at the server. The client(PC, PDA, PCS) receives the image data from the remote server and the received image is decoded from decompression. We use the TCP/IP protocol to send the image frames. The client can control the position of the camera by sending the control command to the server. Two DC servo motors for the camera are controlled in any directions, up-down and left-right, by the controller which is communicating with the server via the serial communication to get the control command. In this way, on the client we can monitor the moving images at the server and also control the position of the camera.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권12호
• /
• pp.4492-4507
• /
• 2021

In camera sensor networks (CSNs), in order to better identify the point, full-view problem requires capture any facing direction of target (point or intruder), and its coverage prediction and sensor density issues are more complicated. At present, a lot of research supposes that a large number of homogeneous camera sensors are randomly distributed in a bounded square monitoring region to obtain full-view rate which is close to 1. In this paper, we deduce the sensor density prediction model in heterogeneous deployed CSNs with arbitrary full-view rate. Aiming to reduce the influence of boundary effect, we introduce the concepts of expanded monitoring region and maximum detection area. Besides, in order to verify the performance of the proposed sensor density model, we carried out different scenarios in simulation experiments to verify the theoretical results. The simulation results indicate that the proposed model can effectively predict the sensor density with arbitrary full-view rate.

• 한국정보통신학회논문지
• /
• 제10권8호
• /
• pp.1366-1372
• /
• 2006

농산물에 대한 수입이 개방된 이후 대량의 값싼 외국 농산물들은 점점 국내 농산물 시장의 점유율을 높이고 있으며, 이러한 과정에서 수입 시 사용된 방부제와 기타 유해 물질들의 검출 문제도 발생하고 있다. 국내 농가들은 시장 경쟁력을 높이기 위하여 국가의 체계적인 지원과 이를 뒷받침하는 시스템 도입을 요구하고 있다. 이에 본 논문에서는 소비자에게 실시간으로 농산물의 생산 및 관리 정보를 제공하기 위한 모니터링 시스템을 설계하였다. 실시간 모니터링을 위하여 기존의 CCTV(Closed-Circuit Television)와 같은 아날로그 카메라가 아니라, 장소에 구별 없이 네트워크가 가능한 곳에서 CCTV보다 좋은 화질의 영상을 제공하는 웹 카메라를 사용하여 시스템을 구현하였다. 본 실시간 모니터링 시스템의 특징은 여러 웹 카메라 영상을 다중 화면으로 구성한 멀티비전 인터페이스와 농산물을 효율적으로 관리하기 위한 영상 저장 기능 및 정해진 시간에 따라 영상 저장이 이루어지는 스케줄링 녹화가 가능하다.

• 한국수산과학회지
• /
• 제43권6호
• /
• pp.735-739
• /
• 2010

This study investigated a method for monitoring fishes immigrating to upper streams from the sea in relation to water level with elapsed time, and measured fish behavior patterns and swimming speed in a fishing boat gateway using an acoustic camera system. This method was employed due to difficulties, linked to high turbidity, of using only underwater optical systems for monitoring fish migrating to brackish water. Results showed that fish length distribution showed high correlation between haul sampling and an automatic counting algorithm supported by the DIDSON software program. These results will help to maximize the effects of fish run management by increasing understanding of the amount of major fish species migrating in relation to durable water levels.