• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.33.1-33.1
• /
• 2008

As a part of the construction of Korean Space Weather Prediction Center (K-SWPC), Korea Astronomy and Space Science Institute (KASI) installed a Scintillation Monitor (SCINTMON) and an All-Sky Camera to observe upper atmospheric/ionospheric phenomena. The SCINTMON is installed in KASI building in Daejeon in cooperation with Cornell university and is monitoring the ionospheric scintillations on GPS L-band signals. All-Sky Camera is installed at Mt. Bohyun in Youngcheon in cooperation with Korea Polar Research Institute. It is used to take the photograph for upper atmospheric layer through appropriate filters with specific airglow or auroral emission wavelengths and to observe upper atmospheric disturbance, propagation of gravity wave and aurora. The integrated data from the instruments including SCINTMON and All-Sky Camera will be used for giving nowcast on the space weather and making confidential forecast based on some space weather prediction models.

• International Journal of Control, Automation, and Systems
• /
• 제5권1호
• /
• pp.15-23
• /
• 2007

In surveillance, monitoring, and target tracking operations, high-resolution images should be obtained even if the target is in a far distance. Frequent movements of vehicles such as boats degrade the image quality of onboard camera systems. Therefore, stabilizer mechanisms are required to stabilize the line of sight of boatboard camera systems against boat movements. This paper addresses design and implementation of a strapdown boatboard camera stabilizer. A two degree of freedom(DOF)(pan/tilt) robot performs the stabilization task. The main problem is divided into two subproblems dealing with attitude estimation and attitude control. It is assumed that exact estimate of the boat movement is available from an attitude estimation system. Estimates obtained in this way are carefully transformed to robot coordinate frame to provide desired trajectories, which should be tracked by the robot to compensate for the boat movements. Such a practical robotic system includes actuators with fast dynamics(electrical dynamics) and has more degrees of freedom than control inputs. Backstepping method is employed to deal with this problem by extending the control effectiveness.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1011-1016
• /
• 2015

Gas piping systems in power plants and factories are always influenced by the mechanical vibrations of rotational machines such as pumps, blowers, and compressors. Unusual vibrations in a gas piping system influence possible leakages of liquids or gases, which can lead to large explosive accidents. Real-time measurements of unusual vibrations in piping systems in situ prohibit them from being possible leakages owing to the repeated fatigue of vibrations. In this paper, a non-contact 3-dimensional measurement system that can detect the vibrations of a solid body and monitor its vibrational modes is introduced. To detect the displacements of a body, a stereoscopic camera system is used, through which the major vibration types of solid bodies (such as X-axis-major, Y-axis-major, and Z-axis-major vibrations) can be monitored. In order to judge the vibration types, an artificial neural network is used. The measurement system consists of a host computer, stereoscopic camera system (two-camera system, high-speed high-resolution camera), and a measurement target. Through practical application on a flat plate, the measured data from the non-contact measurement system showed good agreement with those from the original vibration mode produced by an accelerator.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2014년도 추계 종합학술대회 논문집
• /
• pp.7-8
• /
• 2014

본 논문에서는 적외선 열 영상 카메라를 기반으로 한 스마트 화재 탐지 및 자동소화 시스템의 구현에 관한 것으로 스마트 화재감지 시스템 및 화재 발생 시 이를 초기에 진화 할 수 있는 자동소화 장치 인터페이스 플랫폼의 설계 및 구현에 관한 것이다. 시스템 개발의 주요 기능은 열 영상 카메라와 메가픽셀 카메라를 기반으로 하는 화재 탐지 영상 시스템 및 뷰어; 화재 발생 시 초기에 화재를 진화 할 수 있는 자동소화 장치시스템; 영상 시스템과 자동소화 장치 시스템을 연결해 주는 인터페이스 플랫폼이다.

• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.864-869
• /
• 2009

The measurement of contact wire uplift in electric railways is one of the most important test parameters to accepting the maximum permitted speed of new electric vehicles and pantographs. The contact wire uplift can be measured over short periods when the pantograph passes monitoring stations. In this paper, a high-speed image measurement system and its image processing method are being developed to evaluate dynamic uplift of overhead contact wires caused by pantograph contact forces of Korea Tilting Train eXpress (TTX) and Korea Train eXpress (KTX). The image measurement system was implemented utilizing a high-speed CMOS (Complementary Metal Oxide Semiconductor) camera and gigabit ethernet LAN. Unlike previous systems, the uplift measurement system using high speed camera is installed on the side of the rail, making maintenance convenient. On-field verification of the uplift measurement system for overhead contact wire using high speed camera was conducted by measuring uplift of the TTX followed by operation speeds at the Honam conventional line and high-speed railway line. The proposed high-speed image measurement system to evaluate dynamic uplift of overhead contact wires shows promising on-field applications for high speed trains such as KTX and TTX.

• 한국IT서비스학회지
• /
• 제17권3호
• /
• pp.53-61
• /
• 2018

In this paper, we propose a car sealing monitoring system combined with ICT Technology. The automobile sealer is an adhesive used to bond inner and outer panels of doors, hoods and trunks of an automobile body. The proposed car sealer monitoring system is a system that can accurately and automatically inspect the condition of the automobile sealer coating process in the general often factory production line where the lighting change is very severe. The sealer inspection module checks the state of the applied sealer using an area scan camera. The vision inspection algorithm is adaptive to various lighting environments to determine whether the sealer is defective or not. The captured images and test results are configured to send the task results to the task manager in real-time as a smartphone app. Vision inspection algorithms in the plant outdoors are very vulnerable to time-varying external light sources and by configuring a monitoring system based on smart mobile equipment, it is possible to perform production monitoring regardless of time and place. The applicability of this method was verified by applying it to an actual automotive sealer application process.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.595-599
• /
• 2002

Edge welding of thin sheets is very difficult because of the fit-up problem and small weld area In laser welding, joint fit-up and penetration are critical for sound weld quality, which can be monitored by appropriate methods. Among the various monitoring systems, visual monitoring method is attractive because various kinds of weld pool information can be extracted directly. In this study, a vision sensor was adopted for the weld pool monitoring in pulsed Nd:YAG laser edge welding to monitor whether the penetration is enough and the joint fit-up is within the requirement. Pulsed Nd:YAG laser provides a series of periodic laser pulses, while the shape and brightness of the weld pool change temporally even in one pulse duration. The shutter-triggered and non-interlaced CCD camera was used to acquire a temporally changed weld pool image at the moment representing the weld status well. The information for quality monitoring can be extracted from the monitored weld pool image by an image processing algorithm. Weld pool image contains not only the information about the joint fit-up, but the penetration. The information about the joint fit-up can be extracted from the weld pool shape, and that about a penetration from the brightness. Weld pool parameters that represent the characteristics of the weld pool were selected based on the geometrical appearance and brightness profile. In order to achieve accurate prediction of the weld penetration, which is nonlinear model, neural network with the selected weld pool parameters was applied.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.630-636
• /
• 2008

Monitoring the location of the shoreline and foreshore changes through the time and core tasks are carried out by coastal engineers for a wide range of research. With the advent of digital imaging technology, the shore-based video monitoring system provides many advantages than field surveys. This study presents the development and construction(installation) of video monitoring system to assist the study of coastal and shoreline dynamics and evolution, especially sandbar variation at the Nakdong river estuary. For the purpose of this study, at high building near the Dadea-po beach (St. 2) and Jinudo(island) (St. 1) foreshore region, where coastline variation is highly active, 5 video cameras installed; the coastline movement has monitored since Aug. 2007 using the systems. From the image results of video camera, the 'Spit' type sandbar appears at the foreshore region of Doyodeung and Dadea-po beach and measured the deposition process of Jinudo(island) foreshore region. As a result, the monitoring system using video-based technique built in this study would be able to identify changes in the area and width of shoreline and beach of Nakdong river estuary.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.135-143
• /
• 2005

The shoes process management monitoring system for supporting SCM is developed in this study. This system consists of a monitoring program, a conveyer system, a pneumatic unit, a controller, an USB camera, and a server and a client computer. To operate the developed system easily, the monitoring program using LabVIEW in the Windows environment is developed. This program consists of 5 modules: production management, inventory control, media management, defective management, and communication management. The developed system has several advantages: reduced time for managing process work, decreased labor costs, effective operation, and continuous work without an operator. Nowadays advanced manufacturing companies are trying to find a way to check the performance of their production equipments and plants from remote sites. Thus, to manage the developed system from remote sites, communication network is constructed. In order to evaluate the performance of the monitoring system, experiments were performed. The experimental results showed that the developed system provided a reliable performance and a stable communication.

• 한국초지조사료학회지
• /
• 제41권4호
• /
• pp.295-301
• /
• 2021

본 연구는 무인기를 이용한 동계사료의 수량조사시 필요한 검량식의 작성을 위한 식생조사 및 분광측정의 적정 시기와, 작성된 검량식의 적용이 적절한 시기를 판단하기 위하여 고정식 자동 분광 측정장치를 개발하여 호밀, 총체보리, IRG를 대상으로 NDVI를 장기간 측정하였다. 그리고 NDVI가 최댓값이 되는 날을 기준으로 증가기간과 감소시간으로 기간을 나누어 건물수량 예측을 위한 검량식을 작성하고 검량식의 예측정확도를 각각 비교하였다. 조사결과 호밀, 총체보리, IRG는 각각 4월 8일, 4월 9일, 4월 5일에 NDVI가 최대치가 되었으며 NDVI 증가기간의 검량식은 결정계수(R²)는 각각 0.84, 0.84, 0.78로 높은 상관관계를 보였고 NDVI 감소기간에는 각각 0.00, 0.02, 0.27로 매우 낮게 나타났다. 따라서 NDVI 측정을 통한 건물수량 예측을 효율적으로 하기 위해서는 NDVI 변화를 정확히 측정할 필요가 있으며 고정식 자동 분광 측정 방법은 생육에 따른 NDVI의 정밀 측정에 효과적인것으로 판단된다.