• 한국환경복원기술학회지
• /
• 제9권2호
• /
• pp.81-89
• /
• 2006

The purpose of this study was to evaluate the applicability of small RC(radio controlled) helicopter and single lens reflect camera as SFAP(Small Format Aerial Photography) aquisition system to monitor the vegetation coverage of wetland. The system used to take pictures of small artificial wetland were a common optical camera(Nikon F80 with manual lens whose focal length was 28mm) attached to the bottom of a RC helicopter with a 50 cubic inch size glow engine. Three hundreds pictures were taken at the altitude of 50m above the ground, from 23rd June to 7th September 2005. Four from the images were selected and scanned to digital images whose dimension were 2048${\times}$1357 pixels. Those images were processed and rectified with GCP(Ground Control Poins) and digital map, and then classified by the supervised- classification module of image processing program PG-steamer Version 2.2. The major findings were as follows ; 1. The final images processed had very high spatial resolution so that the objects bigger than 30mm like lotus(Nelumbo nucifera), rock and deck were easily identified. 2. The dominant plants of the monitoring site were Monochoria ragianlis, Typha latifolia, Beckmannia syzigachne etc. Because those species have narrow and long leaves and form irregular biomass, the individuals were hardly identifiable, but the distribution of population were easily identifiable depending on the color difference. 3. The area covered by vegetation was rapidly increased during the first month of monitoring. At the beginning of the monitoring 23th June 2005, The rate of area covered by vegetation were only 34%, but after 27 and 60 days it increased to 74%, and the 86% respectively.

• 한국인터넷방송통신학회논문지
• /
• 제19권6호
• /
• pp.9-13
• /
• 2019

본 논문에서는 IoT 기반 열상 센서와 영상 센서 일체형 IP CCTV 설계에 관하여 연구하였으며 Full HD IP 카메라 영상과 열상모듈에서 전송되어지는 열상 데이터를 동시에 인지하여 가공 및 전송 할 수 있는 모니터링 시스템에 사용할 수 있도록 하였다. 열상 센서에서 감지하는 신호를 디지털로 변환하여 영상에 중첩시켜 실제 주변 온도에 대한 정보를 영상과 함께 실시간 제공하고, 영상 카메라에 열상이 추가됨으로 온도 변화를 예측하여 기존 장비에서 불가능한 화재 예측이 가능하게 하였다. 따라서 열상 센서와 영상센서 일체형 감시 장비를 통하여 환경 모니터링 시스템에서 전송되는 온도 데이터와 영상 신호를 송신하여 모니터링 시스템에 적용 가능하도록 하였다.

• 한국위성정보통신학회논문지
• /
• 제7권3호
• /
• pp.116-120
• /
• 2012

전 세계적으로 빌딩 에너지 세이빙에 대한 관심이 증가하고 있으며, BEMS(Building Energy Management System)을 효율적으로 운용하기 위한 IT 기술에 대한 연구를 지속적으로 진행하고 있다. 최근 LED 조명기술의 발전으로 LED를 제어하여 에너지 절감효과를 극대화 할 수 있으며 BEMS에 이러한 LED 조명 제어기술들이 개발되고 있다. 본 논문에서는 건물에 설치되어 있는 IP 카메라와 Adaptive GMM(Gaussian Mixture Model)을 이용하여 BEMS용 LED 조명제어에 대한 시스템을 제안하였다. 설계한 구조를 기반으로 빌딩의 영상을 실시간으로 모니터링하고, 동적 객체를 영상추적하며, 다수의 객체를 클러스터링하고 인체 이동을 감지하여 LED 조명을 제어하는 기능을 제안하고, 관련 Software 개발을 통해 구현가능성을 입증하였다.

• 한국ITS학회 논문지
• /
• 제22권1호
• /
• pp.115-125
• /
• 2023

본 논문은 교통상태 감시 등 교통관제를 위해 설정한 CCTV 카메라의 화각 상태에서 교통량, 속도 등 교통정보 수집을 동시에 수행할 수 있는 CCTV 카메라 자세보정 알고리즘 개발에 관한 것이다. 개발한 자율자세보정 알고리즘은 차량인식 및 추적기법을 이용하여 도로를 식별하고, 운영자의 교통감시 및 교통정보 수집을 위한 화각을 결정한다. 제안 알고리즘의 성능검증은 현장에 설치한 CCTV를 이용하였으며, 교통감시 및 교통정보 수집을 위해 각각 설정한 화각에 대해 자율자세보정 알고리즘이 자동 산출한 화각의 결과와 비교하였다. 분석결과 운영자 감시를 위한 화각은 상호 96%의 일치성을 보였다. 교통정보의 경우는 교통량 및 속도의 정확도가 각각 96%, 95%로 산출됐으며 수동 설정한 화각과 비교할 때 약 2%의 오차가 발생하는 것으로 나타났다. 결과적으로 제안 알고리즘을 통해 관제용 CCTV를 이용하여 교통정보 수집 및 교통상황 감시를 동시에 수행할 수 있음을 확인하였다.

• 수산해양기술연구
• /
• 제60권2호
• /
• pp.128-141
• /
• 2024

Fish resource surveys were conducted near Jeju Island in June, August and October 2021 using an underwater camera monitoring system, fish pots, and SCUBA diving methods. The efficiency of the methods used to survey fish resources was compared using the number of individuals compared to area per unit time (inds/m³/h) and the number of species compared to area per unit time (spp./m³/h). As a result of comparing the number of individuals compared to the area per unit time (inds/m³/h), the order was underwater camera 214.69, SCUBA diving 124.62, and fish pots 0.57 inds/m³/h. The number of species compared to area per unit time (spp./m³/h) is in the following order: SCUBA diving 0.85, underwater camera 0.38, and fish pots 0.01 spp./m³/h. The fish resource monitoring method using underwater cameras was found to be more efficient in individual counts, and the SCUBA diving method was found to be more efficient in species counts. When considering cost and survey efficiency, the fish resource survey method using underwater cameras was judged to be more effective. The results of this study are expected to be widely used in estimating the population density of fish, which is the core of future fisheries resource surveys.

• Journal of Multimedia Information System
• /
• 제5권2호
• /
• pp.105-110
• /
• 2018

Autonomous cars require the integration of multiple communication systems for driving safety. Many carmakers unveil mirrorless concept cars aiming to replace rear and sideview mirrors in vehicles with camera monitoring systems, which eliminate blind spots and reduce risk. This paper presents optical vehicle-to-vehicle (V2V) communications for autonomous mirrorless cars. The flicker-free light emitting diode (LED) light sources, providing illumination and data transmission simultaneously, and a high speed camera are used as transmitters and a receiver in the OCC link, respectively. The rear side vehicle transmits both future action data and vehicle type data using a headlamp or daytime running light, and the front vehicle can receive OCC data from the camera that replaces side mirrors so as not to prevent accidents while driving. Experimental results showed that action and vehicle type information were sent by LED light sources successfully to the front vehicle's camera via the OCC link and proved that OCC-based V2V communications for mirrorless cars can be a viable solution to improve driving safety.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2064-2068
• /
• 2010

In this paper, we introduced a sequential intelligent image analysis system(SIIAS). This system is implemented using PTZ camera with intelligent analysis algorithm and TI's Davinci DM6446. Enter, abandon, removal and cross functions are included in our system. These functions can be used individually or in combination for object monitoring and tracking. Sequential intelligent function processing is more efficient than the previous one by virtue of accurate observation, wide area monitoring and low cost.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.746-751
• /
• 2003

A method of measuring the length of defects on the wall of the spent nuclear fuel pool using the image processing and a laser slit beam is proposed. Since the defect monitoring camera is suspended by a crane and hinged to the crane hook, the camera viewing direction can not be adjusted to the orientation that is exactly perpendicular to the wall. Thus, the image taken by the camera, which is horizontally rotated along the axis of the camera supporting beam, is distorted and thus, the precise length can not be measured. In this paper, by using the LASER slit beam generator, the horizontally rotated angle of the camera is estimated. Once the angle is obtained, the distorted image can be easily reconstructed to the image normal to the wall. The estimation algorithm adopts a 3-dimensional coordinate transformation of the image plane where both the laser slit beam and the original image of the defects exist. The estimation equation is obtained by using the information of the beam projected on the wall and the parameters of this equation are experimentally obtained. With this algorithm, the original image of the defect taken at arbitrary rotated angle can be reconstructed to an image normal to the wall. From the result of a series of experiments, the accuracy of the defect is measured within 0.6 and 1.3 % error bound of real defect size in the air and underwater, respectively under 30 degree of the inclined angle of the laser slit beam generator. Also, the error increases as the inclined angle increases upto 60 degree. Over this angle, the defect length can not be measured since the defect image disappears. The proposed algorithm enables the accurate measurement of the defect length only by using a single camera and a laser slit beam.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.535-544
• /
• 2024

In the rapidly advancing landscape of computer vision (CV) technology, there is a burgeoning interest in its integration with the construction industry. Camera calibration is the process of deriving intrinsic and extrinsic parameters that affect when the coordinates of the 3D real world are projected onto the 2D plane, where the intrinsic parameters are internal factors of the camera, and extrinsic parameters are external factors such as the position and rotation of the camera. Camera pose estimation or extrinsic calibration, which estimates extrinsic parameters, is essential information for CV application at construction since it can be used for indoor navigation of construction robots and field monitoring by restoring depth information. Traditionally, camera pose estimation methods for cameras relied on target objects such as markers or patterns. However, these methods, which are marker- or pattern-based, are often time-consuming due to the requirement of installing a target object for estimation. As a solution to this challenge, this study introduces a novel framework that facilitates camera pose estimation using standardized materials found commonly in construction sites, such as concrete forms. The proposed framework obtains 3D real-world coordinates by referring to construction materials with certain specifications, extracts the 2D coordinates of the corresponding image plane through keypoint detection, and derives the camera's coordinate through the perspective-n-point (PnP) method which derives the extrinsic parameters by matching 3D and 2D coordinate pairs. This framework presents a substantial advancement as it streamlines the extrinsic calibration process, thereby potentially enhancing the efficiency of CV technology application and data collection at construction sites. This approach holds promise for expediting and optimizing various construction-related tasks by automating and simplifying the calibration procedure.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.135-140
• /
• 2003

This study try to surface deformation analyzing and 3-D monitoring of hydro structure by close-range photogrammetry technique using 35mm metric camera. For this, the lens distortion parameters were acquired for 21mm super-wide-angle lens which is mounted in 35mm metric camera. After that, the system designed for absolute deformation analysis of object surface, and examined the application validity Also, optimum photographing condition was derived by calculated the standard deviation of this system. This system can monitor periodically changing of surface area, volume and deformation precisely after placed plate underwater. Finally, this paper suggested efficiency of absolute deformation analysis by using small format camera.