• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.11 s.188
• /
• pp.58-67
• /
• 2006

Due to the variety of signal processing and complicated mathematical analysis, it is not easy to accomplish 3D bin-picking with non-contact sensor. To solve this difficulties the reliable signal processing algorithm and a good sensing device has been recommended. In this research, 3D laser scanner and CCD camera is applied as a sensing device respectively. With these sensor we develop a two-step bin-picking method and reliable algorithm for the recognition of 3D bin object. In the proposed bin-picking, the problem is reduced to 2D intial recognition with CCD camera at first, and then 3D pose detection with a laser scanner. To get a good movement in the robot base frame, the hand eye calibration between robot's end effector and sensing device should be also carried out. In this paper, we examine auto-calibration technique in the sensor calibration step. A new thinning algorithm and constrained hough transform is also studied for the robustness in the real environment usage. From the experimental results, we could see the robust bin-picking operation under the non-aligned 3D hole object.

• Journal of Sensor Science and Technology
• /
• v.14 no.2
• /
• pp.116-124
• /
• 2005

In this paper range measurement systems are designed using an ultrasonic sensor and a camera. An ultrasonic sensor provides the range measurement to a target quickly and simply but its low resolution is a disadvantage. We tackle this problem by employing a camera. Instead using a stereoscopic sensor, which is widely used for 3D sensing but requires a computationally intensive stereo matching, the range is measured by focusing and structured lighting. In focusing a straightforward focusing measure named as MMDH(min-max difference in histogram) is proposed and compared with existing techniques. In the method of structure lighting, light stripes projected by a beam projector are used. Compared to those using a laser beam projector, the designed system can be constructed easily in a low-budget. The system equation is derived by analysing the sensor geometry. A sensing scenario using the systems designed is in two steps. First, when better accuracy is required, measurements by ultrasonic sensing and focusing of a camera are fused by MLE(maximum likelihood estimation). Second, when the target is in a range of particular interest, a range map of the target scene is obtained by using structured lighting technique. The systems designed showed measurement accuracy up to 0.3[mm] approximately in experiments.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.397-408
• /
• 2008

A wide variety of applications of imaging spectrometer have been proved using data from airborne systems. The Compact Airborne Imaging Spectrometer System (CAISS) was jointly designed and developed as the airborne hyperspectral imaging system by Korea Aerospace Research Institute (KARI) and ELOP inc., Israel. The primary mission of the CAISS is to acquire and provide full contiguous spectral information with high spatial resolution for advanced applications in the field of remote sensing. The CAISS consists of six physical units; the camera system, the gyro-stabilized mount, the jig, the GPS/INS, the power inverter and distributor, and the operating system. These subsystems are to be tested and verified in the laboratory before the flight. Especially the camera system of the CAISS has to be calibrated and validated with the calibration equipments such as the integrating sphere and spectral lamps. To improve data quality and its availability, it is the most important to understand the mechanism of imaging spectrometer system and the radiometric and spectral characteristics. The several performance tests of the CAISS were conducted in the camera system level. This paper presents the major characteristics of the CAISS, and summarizes the results of performance tests in the camera system level.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.44-52
• /
• 2019

We implement an educational indoor autonomous mobile robot system that integrates LiDAR sensing information with RGB-D camera image information and exploits the integrated information. This system uses the existing sensing method employing a LiDAR with a small number of scan channels to acquire LiDAR sensing information. To remedy the weakness of the existing LiDAR sensing method, we propose the 3D structure recognition technique using depth images from a RGB-D camera and the deep learning based object recognition algorithm and apply the proposed technique to the system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1105-1109
• /
• 1995

A CCD-camera, which is structured with vision system, was used to realize automatic seam-tracking system and 3-D information which is needed to generate torch path, was obtained by using laser-slip beam. To extract laser strip and obtain welding-specific point, Adaptive Hough-transformation was used. Although the basic Hough transformation takes too much time to process image on line, it has a tendency to be robust to the noises as like spatter. For that reson, it was complemented with Adaptive Hough transformation to have an on-line processing ability for scanning a welding-specific point. the dead zone,where the sensing of weld line is impossible, is eliminated by rotating the camera with its rotating axis centered at welding torch. The camera angle is controlled so as to get the minimum image data for the sensing of weld line, hence the image processing time is reduced. The fuzzy controller is adapted to control the camera angle.

• Korean Journal of Remote Sensing
• /
• v.12 no.2
• /
• pp.97-110
• /
• 1996

In this paper, we describe the structure, function, and the operation method of the high resolution CCD camera system on the KITSAT-3, which will be launched in 1998. We have developed the camera system with the University of Stellenbosch in the Republic of South Africa. Currently we are doing the environmental test for the engineering model of the camera system. The main purposes of the system are the technology acquisition and operation test. The around resolution of the system is 15 m at the 800 Km earth orbit.

• Korean Journal of Remote Sensing
• /
• v.19 no.2
• /
• pp.99-106
• /
• 2003

The shoreline changes were observed and analysed using the video image by a remote unmanned automatic camera monitoring system installed at Haeundae beach of Busan City. In order to analyse quantitatively the shoreline changes caused by waves and tides, the image averaging technique and the rectification technique for obliquely acquired image were applied to the video image during the typhoon Bart in September, 1999. The results showed that the camera monitoring system can be used as a very cost effective and efficient tool for monitoring shorelines which change continuously due to waves and tides.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.88-99
• /
• 1998

In assembly, misalignment must be detected and compensated for during the mating period, regardless of the complexity of the cross-sectional shape. To this end, we propose a novel omnidirectional image sensing system for assembling parts with complicated shapes(OISSA) and its feasibility for detecting the misalignment between mating parts is shown by a series of simulations. This system encompasses a camera with an optical unit attached to the front of the camera. The optical unit consists of a pair of plane mirrors and a pair of conic mirrors. Utilizing the proposed sensing system, a 2$\pi$ coaxial image of the misalignment along the mating boundary interface between mating parts can be immediately obtained without experiencing self-occlusion.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.233-236
• /
• 2004

In this study, we analyzed the accuracy of the conversion from DLT parameters to physical camera parameters and optimized the use of DLT model for non-metric cameras in photogrammetric tasks. Using the simulated data, we computed two sets of physical camera parameters from DLT parameters and Bundle adjustment for various cases. Comparing two results based on the RMSE values of check points, we optimized the arrangement of GCPs for DLT.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.46-46
• /
• 2017

We developed a rice simulation model for remote-sensing (SIMRIW-RS, Homma et al., 2007) to evaluate rice production and management on a regional scale. Here, we reports its application trial to estimate rice production in farmers' fields in Sendai, Japan. The remote-sensing data for the application was periodically obtained by multispectral camera (RGB + NIR and RedEdge) attached with unmanned air vehicle (UAV). The airborne images was 8 cm in resolution which was attained by the flight at an altitude of 115 m. The remote-sensing data was relatively corresponded with leaf area index (LAI) of rice and its spatial and temporal variation, although the correspondences had some errors due to locational inaccuracy. Calibration of the simulation model depended on the first two remote-sensing data (obtained around one month after transplanting and panicle initiation) well predicted rice growth evaluated by the third remote-sensing data. The parameters obtained through the calibration may reflect soil fertility, and will be utilized for nutritional management. Although estimation accuracy has still needed to be improved, the rice yield was also well estimated. These results recommended further data accumulation and more accurate locational identification to improve the estimation accuracy.