• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.170-170
• /
• 2000

This paper deals with on-Line detection of strip movement and real time positioning of brackets of EMD connected with it. Strip movement is detected by 4 line CCD camera and measured position correction value is inputted to motor position controller to control position of brackets.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.1
• /
• pp.35-41
• /
• 2012

This paper proposes a moving object detection algorithm for active camera system that can be applied to mobile robot and intelligent surveillance system. Most of moving object detection algorithms based on a stationary camera system. These algorithms used fixed surveillance system that does not consider the motion of the background or robot tracking system that track pre-learned object. Unlike the stationary camera system, the active camera system has a problem that is difficult to extract the moving object due to the error occurred by the movement of camera. In order to overcome this problem, the motion of the camera was compensated by using SURF and Pseudo Perspective model, and then the moving object is extracted efficiently using stochastic Label Cluster transport model. This method is possible to detect moving object because that minimizes effect of the background movement. Our approach proves robust and effective in terms of moving object detection in active camera system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.2
• /
• pp.40-49
• /
• 1992

In this paper,a new approach-using the linear movement of the lens location in a camera and focal distance in each location for the measurement of the depth of the 3-D object from several 2-D images-is proposed. The sharply focused edges are extracted from the images obtained by moving the lens of the camera, that is, the distance between the lens and the image plane, in the range allowed by the camera lens system. Then the depthin formation of the edges are obtained by the lens location. In our method, the accurate and complicated control system of the camera and a special algorithm for tracing the accurate focus point are not necessary, and the method has some advantage that the depth of all objects in a scene are measured by only the linear movement of the lens location of the camera. The accuracy of the extracted depth information is approximately 5% of object distances between 1 and 2m. We can see the possibility of application of the method in the depth measurement of the 3-D objects.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.269-276
• /
• 2010

In this paper, we present the detection method of moving objects based on two background models. These background models support to understand multi layered environment belonged in images taken by shaking camera and each model is MBM(Multiple Background Model) and TMBM (Temporal Median Background Model). Because two background models are Pixel-based model, it must have noise by camera movement. Therefore correlation coefficient calculates the similarity between consecutive images and measures camera motion vector which indicates camera movement. For the calculation of correlation coefficient, we choose the selected region and searching area in the current and previous image respectively then we have a displacement vector by the correlation process. Every selected region must have its own displacement vector therefore the global maximum of a histogram of displacement vectors is the camera motion vector between consecutive images. The MBM classifies the intensity distribution of each pixel continuously related by camera motion vector to the multi clusters. However, MBM has weak sensitivity for temporal intensity variation thus we use TMBM to support the weakness of system. In the video-based experiment, we verify the presented algorithm needs around 49(ms) to generate two background models and detect moving objects.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.25-28
• /
• 2000

Gaze detection is to find out the position on a monitor screen where a user is looking at, using the computer vision processing. This System can help the handicapped to use a computer, substitute a touch screen which is expensive, and navigate the virtual reality. There are basically two main types of the study of gaze detection. The first is to find out the location by face movement, and the second is by eye movement. In the gaze detection by eye movement, we find out the position with special devices, or the methode of image processing. In this paper, we detect not the iris but the pupil from the image captured by Head-Mounted Camera with infra-red light, and accurately locate the position where a user looking at by A(fine Transform.

• Journal of Information Display
• /
• v.12 no.3
• /
• pp.125-128
• /
• 2011

Alignment failure sometimes occurs during the rubbing process because the rubbing cloth comes in direct contacts with the surface of the alignment film. A number of researches observed and evaluated the surface of the alignment film after the rubbing process had been reported. The real-time rubbing process has not been observed directly yet, though. In this study, the movement of the piles of the rubbing cloth during the rubbing process was observed with a high-speed camera. Furthermore, the relationship between the rubbing scratch on the alignment films and the movement of the pile was investigated. It was found that the movement of the pile affected the rubbing scratches.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.121-129
• /
• 1998

A quantitative non-contact multi-point measurement system is proposed to the measurement of three-dimensional movement of floating vessels by using digital image processing. The instantaneous three-dimensional movement of a floating structure which is floating in a small water tank is measured by this system and its three-dimensional movement is reconstructed by the measurement results. The validity of this system is verified by position identification for spatially distributed known positional values of basic landmarks set for the camera calibration. It is expected that this system is applicable to the non-contact measurement for an unsteady physical phenomenon especially for the measurement of three-dimensional movement of floating vessels in the laboratory model test.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.219-221
• /
• 2014

The objective of this paper is to simulate the dynamic behavior of a floating structure model, using image processing and close-range photogrammetry, instead of the contact sensors. Previously, the movement of structure was presented through the exterior orientation estimation of a single camera by space resection. The inverse resection yields the 6 orientation parameters of the floating structure, with respect to the camera coordinate system. The single camera solution is of interest in applications characterized by restriction in term of costs, unfavorable observation conditions, or synchronization demands when using multiple cameras. This article discusses the theoretical determinations of camera exterior orientation based on Direct Linear Transformation and photogrammetric resection using least squares adjustment. The proposed method was used to monitor the motion of a floating model. The results of six degrees of freedom (6-DOF) by inverse resection show that the appropriate initial values by DLT can be effectually applied in least squares adjustment, to obtain the precision of exterior orientation parameters. Additionally, a comparison between the close-range photogrammetry and total station results was feasibly verified. Therefore, the proposed method can be considered as an efficient solution to simulating the movement of floating structure.

• Journal of the Korea Computer Graphics Society
• /
• v.28 no.3
• /
• pp.13-21
• /
• 2022

In this paper, the goal is to investigate how manipulating the camera can minimize motion sickness and maximize immersion when a user moves in a virtual environment that requires vertical movement. In general, since a user uses virtual reality in a flat space, the actual movement of the user and the virtual movement are different, resulting in sensory conflict, which has the possibility of causing virtual reality motion sickness. Therefore, we propose three powerful camera manipulation techniques, implement them, and then propose which model is most appropriate through user experiments.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.70-74
• /
• 2018

In order to ensure the flow of goods available and more flexible, reduce labor costs, many factories and industrial zones around the world are gradually moving to use automated solutions. One of them is to use Automated guided vehicles (AGV). Currently, there are a line tracing method as an AGV operating method, and a method of estimating the current position of the AGV and matching with a factory map and knowing the moving direction of the AGV. In this paper, we propose ceiling Light and guided line based moving direction estimation algorithm using multi-camera on the AGV in smart factory that can operate stable AGV by compensating the disadvantages of existing AGV operation method. The proposed algorithm is able to estimate its position and direction using a general - purpose camera instead of a sensor. Based on this, it can correct its movement error and estimate its own movement path.