• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.3
• /
• pp.1-13
• /
• 2019

The study examines preference between rural bus and call-a-bus before call-a-bus operation and empirically analyzes the effecting factors on the call-a-bus satisfaction after operation. As the result of log-linear model, older persons prefer call-a-bus because of door-to-door service convenience and female also because of limitation of trip moving means. It is shown that persons with lower number of trips prefer call-a-bus. As the result of ordinal regression model for call-a-bus satisfaction, age, the number of family members and bus stop distance have the positive tendency but the going out frequency and the return time negative among rural bus preference persons. Male and the going out frequence show the negative tendency but trip moving means, bus stop distance, rural bus satisfaction, depart and return time positive among call-a-bus preference persons. The persons who have the positive preference on call-a-bus shows higher satisfaction on call-a-bus.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.4
• /
• pp.21-28
• /
• 2019

As ICT technology develops, researches on the construction of communication system for the rapid processing using ICT technology in case of traffic accidents are actively under way. e-Call (Emergency call) is a vehicle ICT-based emergency rescue system that recognizes and reports traffic accidents. On the other hand, the existing bus information system collects the positioning data through the position tracking system mounted on the bus and transmits it to the center, and then provides various services based on the bus information of the collected buses. In this paper, we designed and implemented an emergency rescue system that using the existing bus information system in order to deal with accidents, failures, and emergency situations on public buses quickly.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.19-20
• /
• 2015

Since 2013, Seoul Metropolitan Government (SMG) has introduced big data initiatively in administration and put into practices in transportation, safety, welfare in order to overcome limited resources and conflicting interests. For establishing a new midnight bus service, SMG prepared optimized midnight bus routes by analyzing big data from mobile phone Call Data Record (CDR) through collaboration with a telecommunication company. Despite of limited budget and resources, newly identified routes can cover over 42% of the citizen with 9 routes and less than 1% of buses compare with day time operation. In addition to solve transportation problem, SMG utilizes big data to resolve location selection problem for choosing new facility locations such as life double cropping centers and senior citizen leisure centers. As results, SMG demonstrates big data as a good tool to make policies and to build smarter city by overcome space-time limitation of resources, mediation of conflicts, and maximizes benefit of the citizen.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.205-216
• /
• 2009

The aim of this study is to propose an integrated operation plan of information call services by multi-connecting call services which are now being serviced by each different call number services and by providing one stop service which organically links alternative transportations such as railroad, air, and bus and also related organizations as well as road traffic information. For the objective, we analyzed the current status of Korean and foreign country systems and reviewed operation technology and technical specifications of the integrated system according to 3 steps, i.e. infrastructure procurement, test bed and extended completion, stabilization and high valuable services completion. Throughout the result of this study, traffic information one stop service, convenient service, diverse related information provision service, real-time information provision, and efficient system are expected to be implemented in the traffic information call service.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.101-116
• /
• 2017

This Study estimates the actual night traffic using the smart card data used by most of the public transportation users, and compares it with the current night bus routes by KT Telecom based on the night time call volume. In order to compare the current night bus and night trips evaluated by smart card data, we presented indicators related to the degree of matching, and estimated the volume of service currently provided. The unique approach of the study is that we chose subway station instead of bus stop for the unit of the study. Bus stops has their complexity in a way that stops with same name could belong to different administrative area depending on its direction. For this reason, we decided to use subway station and defined its adjacent administrative district as the scope of influence. Since night bus is the primary means of transportation during the late night, it is anticipated that they will be able to provide better service by calculating the actual traffic and selecting the routes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.77.4-77
• /
• 2002

Communicating devices for the seriously disabled using eye-ball movement or some body movement are proposed. The first one is a device to use image processing, whose input signal is eyeball movement, A feature of this device is that the device can be readily realized using a note-book computer with USB (Universal Serial Bus) interface bus. This device is incorporated with a word processing software called Nearly Ladder. The second one is an emergency call switch which is used by a patient who can move his finger slightly. The patients can switch on the emergency switch only by touching a switch with his finger. The essence of this sensor is a touch sensor. The sensor can be realized using onl...

• ETRI Journal
• /
• v.10 no.2
• /
• pp.13-19
• /
• 1988

This paper describes on the interworking services. interworking issues and the design concepts in the Interworking System (IWS) between Pubilc Switched Telephone Network (PSTN) and Packet Switched Data Network (PSDN), which has been developed at the Electronics and Tedecommunications Research Institute (ETRI). As a gateway between PSTN and PSDN, IWS provides the interconnection between PSTN and PSDN. In addition to the provision of basic interconnection services (i.e. dial-in/dial-out services), IWS provides the Maintenance and Administration (M&A) services for system itself and the supplementary services such as the call barring, direct call and closed user group. The architecture of IWS is based on the multiprocessor system with single system bus. And a multiprocessor real time kernel is used to support the inter-board communication as well as the inter-process commmunications. Especially, the operation and maintenance functions of IWS are treated in detail.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.97-99
• /
• 2007

This paper presents a fuzzy logical control method to implement an on-line optimum efficiency control for Permanent Magnet Synchronous Motor. This method real-timely adjusts the output voltage of the inverter system to achieve the optimum running efficiency of the whole system. At first, the input power is calculated during the steady state in the process of efficiency optimizing. To exactly estimate the steady state of the system, this section needs check up the speed setting on timely. The second section is to calculate input power of dc-bus. The exact measurement of the voltage and current is the vital point to acquire the input power. The third section is the fuzzy logic control unit, which is the key of the whole drive system. Based on the change of input power of dc-bus and output voltage, the variable of output voltage is gained by the fuzzy logical unit. With the on-line optimizing. the whole system call fulfill the minimum input power of dc-bus on the running state. The experimental result proves that the system applied the adjustable V/f control method and the efficiency-optimizing unit possesses optimum efficiency, and it is a better choice for simple variable speed applications such as fans and pump.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.81-91
• /
• 2008

In this study, data collection delay time generated in bus information system is analysed and improvement on system reliability by minimizing the delay time is suggested. To minimize the data collection delay time (call setup time), factors on data collection phase are analyzed. Each connecting time that it occurs from wireless communication during data collection phase, is selected as a main effective variable and a model for selecting an optimum communication point to minimize the effect of data delay time by each connecting time is suggested. In this model, minimization of the point between the time carrying out wireless communication and vehicle moving time, is calculated and the difference between the bus arrival time and information delivered time to the passenger is reduced. The test results for the proposed model in BIS using a CDMA (Code Division Multiple Access) communication show that delay time in real system operation has been improved. The minimum data collection delay time based on optimal communication position leads to the better reliability for Bus Information System. This study can be applied to the selection of optimal communication position and detection position instead of empirical methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1335-1345
• /
• 1994

In this paper, the performance analysis of Inter-Processor Communication Network(IPCN) in a large-capacity digital switching system, TDX-10, is presented. The simulation model of IPCN is developed using discrete event model of SLAM II. The simulation results of maximum buffer length and mean waiting times at each node, and utilization of D-bus are derived. Finally, the maximum call handling capacity of IPCN is obtained by taking link speed into consideration.