• 한국가스학회지
• /
• 제6권1호
• /
• pp.52-58
• /
• 2002

가스 배관 진단 시스템은 배관 내부에 투입되어 배관 내부의 여러 정보를 수집한다. 배관 진단을 위한 센서로는 배관 내부의 상태를 측정하는 캘리퍼(caliper) 센서와 온도, 압력센서가 있다. 그리고 정확한 위치 정보를 제공할 수 있는 IMU(Inertial Measurement Unit)와 주행 거리계를 사용하는 결합 항법 시스템도 필요하다. 본 논문에서는 가스 배관 진단시스템을 위한 항법 데이터 저장 시스템을 개발한다. 항법 데이터 저장 시스템은 실시간 동작을 위하여 마스터/슬레이브 구조를 가진다. 마스터 시스템은 항법 데이터를 저장하거나 통신하는데 사용하며 슬레이브 시스템은 센서 데이터를 처리한다. 개발된 항법 데이터 저장 시스템의 성능은 Pull Rig 실험을 통하여 검증한다.

• Industrial Engineering and Management Systems
• /
• 제9권1호
• /
• pp.20-27
• /
• 2010

The purpose of this study was to compare the consistency of external ear measurements obtained by electronic digital caliper, photocopier scanning and digital photographic methods. Photogrammetric measurements were made after image editing software was used to optimize the brightness, contrast, size and image clarity. The CorelDRAW dimension tool was used to create a dimension line that measured the vertical and horizontal length between any two landmarks. Results of repeated measures analysis of variance revealed no significant differences in length and width of the pinna between the three methods. The reliability of the three measurement techniques showed a high degree of consistency. Further study and efforts could be extended to measurement hands, foots and facial dimensions by present techniques.

• Journal of Nutrition and Health
• /
• 제4권1호
• /
• pp.29-40
• /
• 1971

For the measurement on the fat content if University Students, an intensive examination was conducted on a total of 3,030 students(male 2,577, female 453), from 16 to 25 years of age. The subjects were all students who had passed the written entrance examination for Seoul National University. Total Body Fat amount was measurement by skin-fold thickness with a skin-fold caliper(Manufactured by Cambridge Scientific Industrial Inc. U.S.A.) at four sites of the body, and it was calculated by Kim's and Lee's regression equation. As a result of this survey, the following conclusions were obtained; 1. Physical Measurements: i) The average of body height by anthropometric was male $167.95{\pm}4.85cm$ and female $156.03{\pm}4.56cm$. ii) The average body weight by anthropometric was male $56.42{\pm}5.65kg$ and female $51.29{\pm}5.34kg$. iii) The average of chest-girth by anthropometric was male $89.95{\pm}5.33cm$ and female $81.36{\pm}4.89cm$. iv) The average of sitting-height by anthropometric was male $91.23{\pm}4.98cm$ and female $86.18{\pm}4.15cm$. v) The average of arm circumference by anthropometric was male $23.76{\pm}2.17cm$ and female $22.39{\pm}1.79cm$. In all cases the male measurements were higher than the female. 2. The mean skin-fold thickness measured with a large skin-fold caliper was; At the sub-scapular: male $11.54{\pm}4.84mm$ and female $14.07{\pm}4.49mm$, Abdominal: male $10.36{\pm}7.09mm$ and female $14.95{\pm}5.47mm$, Lumbar; male $12.55{\pm}6.44mm$ and female $17.02{\pm}6.57mm$, Upper arm: male $6.28{\pm}3.71mm$ and female $11.62{\pm}3.99mm$, Total average: male $10.18{\pm}5.52mm$ and female $14.41{\pm}5.13mm$, in all cases the female measurements were higher than the male. 3. Data on body fat amounts according to body fat weight regression equation were: in male: Fat weight=10.56kg, Fat free weight=45.86kg, Fat weight/Total body mass(%)=18.71%, (Body fat amount %), Fat weight/Fat free weight(%)=23.02%, Fat free weight/Total body mass(%)=81.29%. in female: Fat weight=12.23kg, Fat free weight=39.06kg, Fat weight/Total body mass(%)=23.85%, Fat weight/Fat free weight(%)=31.31%, Fat free weight/Total body mass(%)=76.15%. The females value was higher than the males.

• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.43-51
• /
• 2015

목재 이용의 측면에서 중요한 인자 중 하나인 수축률에 관한 다양한 연구가 수행되고 있다. 버니어 캘리퍼스를 이용하여 치수를 측정할 때, 목재 시편에 작용하는 외력에 의해 왜곡된 치수가 측정될 수 있고, 시편의 양이 많으면 치수측정에 많은 시간이 소요된다. 스캐너를 이용하여 획득한 이미지로 치수를 측정하고, 수축률을 계산하면 외력이 작용하지 않아 치수 측정의 오류를 줄일 수 있고, 한 번의 스캔으로 여러 시편의 이미지를 획득하여 시간을 단축시킬 수 있다는 장점이 있다. 스캔 이미지 상에서 목재 시편과 배경 사이의 경계면을 뚜렷하게 구분할 수 있도록 threshold 방법을 적용하여 치수 측정을 용이하게 하였다. 이미지를 이용하여 측정된 목재 시편의 치수는 버니어 캘리퍼스를 이용하여 측정한 값보다 다소 크게 측정되었으며, 버니어 캘리퍼스보다 높은 정밀도로 수축률을 계산하기 위한 스캔 이미지의 최대 픽셀 길이는 0.053 mm/pixel인 것을 확인하였다.

• Journal of Nutrition and Health
• /
• 제4권3호
• /
• pp.5-12
• /
• 1971

For the measurement of the fat contents and nutritional status of urban High School girls, an intensive examination was conducted on a total of 2,085 students from 13 to 19 years of age groups. Total body fat cotents were measured by Skin-fold thickness with a Skin-fold Caliper manufactured by Cambridge Scientific Industrial Inc. at four sites of the body and it was calculated by Kim's regression equation. And Heights, Weights, and Chest circumferences were measured with Martin's Anthropometer. As the results of this study, the following conclusions were obtained: 1. The averages of heights, weights and chest girths were 153.1 cm, 46.2 kg and 76.6 cm. respectively. 2. The mean Skin-fold thicknesses of each site measured with a Lange skin-fold Caliper were: Sub-scapular: $13.44\;mm{\pm}4.41\;mm$. Abdominal : $10.55\;mm{\pm}4.02\;mm$. Lumbar: $10.56\;mm{\pm}4.06\;mm$. Upper arm: $15.35\;mm{\pm}4.37\;mm$. Total Average: $12.46\;mm{\pm}4.48\;mm$. 3. The average Skin-fold thicknesaes by age were as follow: ·9.02 mm at 13 years of age. 10.04 at 14, 11.82 at 15, 14.43 at 16, 15.12 at 17, 16.48 at 18, and 16.61 at 19 respectively. 4. The mean of fat contents calculated according to regression equation was 11.04kg. (9.14 at 13, 9.98 at 14, 11.12 at 15, 11.74 at 16, 12.21 at 17, 12.96 at 18, 13.29 at 19 respectively.)

• 구강회복응용과학지
• /
• 제28권2호
• /
• pp.139-145
• /
• 2012

본 연구의 목적은 근관세척제로 2.5% Sodium Hypochlorite, 2% chlorhexidine gel, 식염수를 사용하였을 때, Root ZX와 Sybron Mini의 근관장 측정의 정확도를 평가하고자 하는 것이다. 20개의 발치된 사람 치아에서 Donnelly의 gelatin technique으로 측정하였다. Digital caliper를 이용해 0.01 mm 단위까지 각 전자 근관장 측정기의 0.5와 0.0 level에서 전자 근관장을 측정하였다. 각 측정은 세척제 종류에 따라 세 번식 반복해서 측정하였다. 세 가지 세척제에서 Sybron Mini와 Root ZX의 정확도는 유의한 차이가 없었으며, 제조사의 지시 (Sybron Mini의 0.0 level과 Root ZX의 0.5 level)에서 전자 근관장 측정)에 따라 사용되었을 때 세척제에 따른 전자 근관장 측정기의 정확도는 유의한 차이가 없었다. Root ZX와 Sybron Mini의 사용 시 제조사의 지시대로 사용한다면, 근관세척제으로서 2.5% Sodium Hypochlorite, 2% chlorhexidine gel, 식염수의 사용은 근관장 측정의 정확도에 영향을 미치지 않는다.

• Imaging Science in Dentistry
• /
• 제35권3호
• /
• pp.115-119
• /
• 2005

Purpose : To evaluate the magnification error percentage in repeatedly taken panoramic radiographs of same patient and machine. Materials and Methods : 92 panoramic radiographs from 46 patients were traced and 30 horizontal and vertical measurements were made with digital sliding caliper. The results were compared with paired t-test. Results : There was no statistically significant difference between the two measurements. The overall difference as percentage error was $6.19\pm5.60\%$. The largest error as $14.61\pm12.44\%$ was found at condylar height 1, and smallest as $1.86\pm1.61\%$ at mandibular height. Overall vertical error excluding condylar height 1 was $3.76\pm3.97\%$, and the horizontal error $6.88\pm5.92\%$. Conclusion . Repeatedly taken panoramic radiographs of the same patient and machine was reliable since there was no significant percentage error difference but the percentage error ranged from $1.86\pm1.61\%\;to\;14.61\pm12.44\%$ indicating the error depends on the measuring site.

• 대한치과보철학회지
• /
• 제11권1호
• /
• pp.9-14
• /
• 1971

The author measured the maximum interincisal distance by means of the sliding caliper. The subjects measured here were 149 healthy Korean males and 229 females, ranging from 15 to 49 years old, with normal occlusion. The results were as follows; 1. The mean value of maximum interincisal distance was $50.03{\pm}0.22mm$. in male and $45.18{\pm}0.14mm$. in female. 2. There was a significant difference in the mean value between male female. 3. The interincisal distances in maximum opening were slightly larger in male than female. 4. There was no significant difference in the mean value between the age groups in Korean adults. But it has been revealed that there was apparent difference in the mean value between 15~19 years and 20~29 years old, in female. 5. It has been appeared that maximum interincisal distance in male was 69mm, minimum 37mm., and maximum interincisal distance in female was 58mm. minimum. 30mm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.150.4-150
• /
• 2001

The geometry PIG provides pipeline operators with continuous measurement of pipe centerline coordinates, bend radius, displacement, and bending strain in a single pass through the pipeline. This study introduces the developed geometry PIG(Pipeline Inspection Gauge) which is used for geometry surveys. This tool is equipped with the several sensor systems. The Inertial Navigation System (INS) comprises angle rate gyros and linear accelerometers. The system measures the precise path of the PIG during its traverse of the pipeline. This system is also used to produce a detailed map of the lire, measure curvature. Odometers measure the PIG´s distance moved along the line and instantaneous speed during the PIG run. Caliper sensors measure pipeline ...

• Journal of Korean Dental Science
• /
• 제15권2호
• /
• pp.132-140
• /
• 2022

Purpose: Dental diagnostic records derived from study models are a popular method of obtaining reliable and vital information. Conventional plaster models are the most common method, however, they are being gradually replaced by digital impressions as technology advances. Moreover, three-dimensional dental models are becoming increasingly common in dental offices, and various methods are available for obtaining them. This study aimed to evaluate the accuracy of the measurement of dental digital models by comparing them with conventional plaster and to determine their clinical validity. Materials and Methods: The study was conducted on 16 patients' maxillary and mandibular dental models. Tooth size (TS), intercanine width (ICW), intermolar width (IMW), and Bolton analysis were taken by using a digital caliper on a plaster model obtained from each patient, while intraoral scans were manually measured using two digital analysis software. A one-way analysis of variance test was used to compare the dental measurements of the three methods. Result: No significant differences were reported between the TS, the ICW and IMW, and the Bolton analysis through the conventional and two digital groups. Conclusion: Measurements of TS, arch width, and Bolton analysis produced from digital models have shown acceptable clinical validity. No significant differences were observed between the three dental measurement techniques.