• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.1-14
• /
• 2019

A full scale hydrodynamic simulation that requires an accurate reproduction of shock-induced detonation was conducted for design of an energetic component system. A detailed hydrodynamic analysis SW was developed to validate the reactive flow model for predicting the shock propagation in a train configuration and to quantify the shock sensitivity of the energetic materials. The pyrotechnic device is composed of four main components, namely a donor unit (HNS+HMX), a bulkhead (STS), an acceptor explosive (RDX), and a propellant (BPN) for gas generation. The pressurized gases generated from the burning propellant were purged into a 10 cc release chamber for study of the inherent oscillatory flow induced by the interferences between shock and rarefaction waves. The pressure fluctuations measured from experiment and calculation were investigated to further validate the peculiar peak at specific characteristic frequency (${\omega}_c=8.3kHz$). In this paper, a step-by-step numerical description of detonation of high explosive components, deflagration of propellant component, and deformation of metal component is given in order to facilitate the proper implementation of the outlined formulation into a shock physics code for a full scale hydrodynamic simulation of the energetic component system.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.105-113
• /
• 2018

In this study, the engineering properties including bearing capacity of subgrades stabilized with a binder are analyzed by laboratory and field experiments. The main components of the binder are CaO and $SO_3$. After the binder was mixed with a low plasticity clay, the passing rates were relatively decreased as the sieve mesh size increased. Not only did the soil type change to silty sand, but engineering properties, such as the plasticity index and modified California bearing ratio (CBR), were improved for the subgrade. A comparison of the compaction curves of the stabilized subgrade and field soil compacted with the same energy demonstrated an increase of approximately 6% in the maximum dry unit weight, slight decrease in optimum moisture content, and considerable increase improvement in grain size. In the modified CBR test, the effect of unit weight and strength increase of the modified soil (with a specific amount of binder) was remarkably improved. As the proportion of granulated material increased after the addition of binder, the swelling was reduced by 3.3 times or more during initial compaction and 6.5 times by final compaction. The unconfined compressive strength of the specimens was maintained at the homogeneous value with a constant design strength. The stabilized subgrade was validated by applying it in the field under the same conditions; this test demonstrated that the bearing capacity coefficients at all six sites after one day of compaction exceeded the target value and exhibited good variability.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1555-1565
• /
• 2018

Detection of subtle ground deformation of volcanoes plays an important role in evaluating the risk and possibility of volcanic eruptions. Ground-fixed observation equipment is difficult to maintain and cost-inefficient. In contrast, satellite remote sensing can regularly monitor at low cost. In this paper, following the study of Chadwick et al. (2006), which applied the interferometric SAR (InSAR) technique to the Sierra Negra volcano, Galapagos. In order to investigate the deformation of the volcano before 2005 eruption, the recent activities of this volcano were analyzed using Sentinel-1, the latest SAR satellite. We obtained the descending mode Sentinel-1A SAR data from January 2017 to January 2018, applied the Persistent Scatter InSAR, and estimated the depth and expansion quantity of magma in recent years through the Mogi model. As a result, it was confirmed that the activity pattern of volcano prior to the eruption in June 2018 was similar to the pattern before the eruption in 2005 and was successful in estimating the depth and expansion amount. The results of this study suggest that satellite SAR can characterize the activity patterns of volcano and can be possibly used for early monitoring of volcanic eruption.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.2
• /
• pp.158-164
• /
• 2021

Hypertriglyceridemia is the main risk factor for atherosclerosis. It is reported that triglyceride (TG) induces macrophage cell death, and is involved in the formation of plaques and development of atherosclerosis. We previously reported that TG-induced cell death of macrophages is mediated via pannexin-1 activation, which increases the extracellular ATP and subsequent increase in potassium efflux, thereby activating the caspase-2/caspase-1/apoptotic caspases, including the caspase-8 pathway. Contrarily, some studies have reported that caspase-8 is an upstream molecule of caspase-1 and caspase-2 in several cellular processes. Therefore, this study was undertaken to investigate whether caspase-8 influences its upstream molecules in TG-stimulated macrophage cell death. We first confirmed that caspase-8 induces caspase-3 activation and poly ADP-ribose polymerase (PARP) cleavage in TG-treated macrophages. Next, we determined that the inhibition of caspase-8 results in reduced caspase-1 and -2 activity, which are upstream molecules of caspase-8 in TG-induced cell death of macrophages. We also found that ATP treatment restores the caspase-8 inhibitor-induced caspase-2 activity, thereby implying that caspase-8 affects the upstream molecules responsible for increasing the extracellular ATP levels in TG-induced macrophage cell death. Taken together, these findings indicate that caspase-8 potentiates the TG-induced macrophage cell death by activating its upstream molecules.

• Particle and aerosol research
• /
• v.16 no.4
• /
• pp.107-117
• /
• 2020

Based on the airborne measurement results over a coal fired power plant and steel work in Dangjin city, SO2 emission amounts of each site are estimated (top-down emission). Airborne measurements were carried out on May-June and October-November 2019. The estimated SO2 emission in 2019 for the power plant was 1502.1 kg/hr and that for the steel work was 2850.5 kg/hr, higher as much as a factor of 2.5 and 2.0, respectively, than the emission amounts provided by both facilities (bottom-up emission). The outcomes strongly illustrates that well designed airborne observations can serve a quantitative diagnostic tool for bottom-up emission estimates. Further research direction to improve the reliability of the top-down emission estimates is suggested.

• The Mathematical Education
• /
• v.61 no.4
• /
• pp.521-537
• /
• 2022

The unprecedented COVID-19 pandemic has disrupted, interrupted, and changed the way we normally prepare our teacher candidates in teacher preparation programs. In this paper, we, two mathematics teacher educators (MTEs), reflect our own experiences in appropriating, transforming, reconstructing, and modifying our pedagogies of teacher education in making a transition from face-to-face to online environment during the COVID-19 pandemic. Using a collaborative self-study, we discussed issues, challenges, changes, opportunities, and innovations of teaching an elementary mathematics methods course in the online environment. Using a constant comparison method, we explored the following three themes: (1) using virtual manipulatives; (2) creating collaborative, interactive, and shared learning experiences for preservice teachers; and (3) making preservice teachers engaged in student thinking. These findings indicated that online teaching requires transformative knowledge for teacher educators. Transferring face-to-face to online is not a simple matter of putting the existing content to online; it should focus on pedagogical improvement in teaching mathematics rather than technology's sake or how it can be repurposed in a new online environment in a way that students' learning is optimized. The findings of this study provide implications for unpacking MTEs' technological pedagogical content knowledge (TPACK), creating collaborative learning experiences for preservice teachers, and designing a collaborative self-study between MTEs engaged in the community of professional learning.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.551-554
• /
• 2011

One of the key issues in the research of organic field-effect transistors (OFETs) is the low-voltage operation. To address this issue, we synthesized poly(styrene-r-benzocyclobutene-r-methyl methacrylate) (P(S-r-BCB-r-MMA)) as a thermally cross-linkable gate dielectrics. The P(S-r-BCB-r-MMA) showed high quality dielectric properties due to the negligible volume change during the cross-linking. The pentacene FETs based on the 34 nm-thick P(S-r-BCB-r-MMA) gate dielectrics operate below 5 V. The P(S-r-BCB-r-MMA) gate dielectrics yielded high device performance, i.e. a field-effect mobility of $0.25cm^2/Vs$, a threshold voltage of -2 V, an sub-threshold slope of 400 mV/decade, and an on/off current ratio of ${\sim}10^5$. The thermally cross-linkable P(S-r-BCB-r-MMA) will provide an attractive candidate for solution-processable gate dielectrics for low-voltage OFETs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.643-650
• /
• 2021

The purpose of this study was to evaluate the impact of lecture content on the overall academic satisfaction in non-contact online classes. The study was conducted using an online survey of 107 university students attending metropolitan, local and foreign universities for a week from August 25th, 2020 to September 2nd, 2020. The analysis methods used included descriptive statistics and chi-square distribution, Fisher's exact test, linear by linear association, and logistic regression. The result of the study showed a significant decrease in Junior by 0.025 times compared to Senior (p<.05). Furthermore, a significant decrease in the impact of recorded lectures by 0.036 times compared to a hybrid of face-to-face and online lectures (p<.05). Compared to the response 'No', the number of student's responses of 'Yes' increased significantly by 31.358 times (p<.05). Additionally, a significant increase was seen in teaching methods by 19.709 times, and academic satisfaction by 7.989 times(p<.05). In conclusion, the results imply that the quality of lecture content is also important to improve the student's satisfaction with school life, but overall management is required in the areas of appropriate teaching methods, appropriate tuition, and evaluation methods.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.393-403
• /
• 2021

Recently, there is becoming larger interest in the public practice centers equipped with advanced manufacturing equipment of industries that is difficult to have in all vocational high schools for strengthening practical education and technical education tailored to the Fourth Industrial Revolution in vocational high schools. In this study, using spatial optimization approaches, we explored the optimal location sets of the public practice centers of vocational high schools in Seoul for an illustration. For the proposed optimial location methods, P-median Problem (PMP) and Maximal Coverage Location (MCLP) were used because, when the public practice centers located in priority of large vocational high schools based on the number of students, it showed that the result is not minimizing the travel distance and maximizing the demand of the vocational high school students. This study found that the PMP can find the optimal location sets that minimize the travel distance of whole students. In addition, all students can be captured through locating five public practice centers by MCLP. It should be noted that the optimal locations of this study are limited in Seoul. However, the frame of this methodology applied in this study can be utilized to locate the public practice centers in other regions based on the spatial decision making.

• Journal of Industrial Convergence
• /
• v.20 no.6
• /
• pp.83-92
• /
• 2022

This study is to investigate the factors affecting post-traumatic stress disorder (PTSD) symptoms among hospital nurses during the COVID-19 pandemic in Korea. Cross-sectional, descriptive design is used in this study. Data collection was completed through an online self-administered survey from December 2020 to January 2021 among 180 registered nurses dealing with COVID-19 patients at hospitals. This survey includes socio-demographic questions, including a 22-item PTSD questionnaire, a 14-item type D personality questionnaire, a 25-item resilience questionnaire, and a 23-item Social Support Scale questionnaire. 56.1% of the subjects in this study were at risk of PTSD. In the high-risk group for PTSD, resilience and social support were lower than those in the low-risk group for PTSD. But there was no statistically significant difference in both variables (resilience t=0.21, p=.836, social support t=1.07, p=.287). However, education (OR = 2.23, p= .041) and type D personality (OR = 3.67, p < .001) were significant factors for PTSD symptoms. The results of the study can be utilized to recognize PTSD in nurses by identifying factors influencing PTSD during epidemics such as COVID-19, and to apply management systems such as psychological programs to help overcome them.