• 대한전자공학회논문지SD
• /
• 제49권6호
• /
• pp.25-34
• /
• 2012

본 논문에서는 near-field scanning (NFS) 시스템을 위한 새로운 보정 방법을 제시하였다. 제안된 교정 방법은 새로운 near-field probe (NFP)와 circular patch patterns (CPPs) and meander patterns (MPs) 같은 새로 고안된 패턴으로 구성되어 있다. 제안된 패턴들은 IEC61967-2과 6에 언급된 기존의 방법과 비교해 공간 해상도을 개선하고 NFP의 교정 절차를 단순화하기 위해 사용하였다. 또한 감쇄 특성에 대한 NFP의 길이 효과를 8mm와 30mm의 길이를 가지고 조사하였다. 이러한 특성을 위해 지름 (D)가 20, 40, 60, 그리고 100mm의 CPP를 만들었고 여러 가지 폭과 간격을 가지는 MP를 설계하고 제작하였다. 단순화된 교정 절차를 이용하여 공간 해상도와 측정 높이 사이의 역 관계를 발견하였다. 테스팅 결과는 측정 높이 $200{\mu}m$에서 $120{\mu}m$의 공간해상도를 복잡한 수정 알고리듬 없이 8GHz 아래에서 얻을 수 있음을 보였다. 제작 단가를 위해 모든 패턴과 NFP는 일반적인 고가의 LTCC 대신 저가의 PCB (FR-4)을 이용해 실현하였다. 이결과를 칩 수주 EMC 사용 가능성을 검증하기 Sub-micron scale 동작이 가능한 NFSS을 제작하였고, 제안된 NFP를 이용하여 사용 칩의 측정결과 $200{\mu}m$ 패턴의 형태를 정확하게 묘사가 가능한 수준의 해상도를 확보하여 칩 수준 EMC 검증에 사용 할 수 있음을 증명하였다.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.673-683
• /
• 2016

This paper analyzes the accuracy of the methods used in calibrating the thermal power of Nigeria Research Reactor-1 (NIRR-1), a low-power miniature neutron source reactor located at the Centre for Energy Research and Training, Ahmadu Bello University, Zaria, Nigeria. The calibration was performed at three different power levels: low power (3.6 kW), half power (15 kW), and full power (30 kW). Two methods were used in the calibration, namely, slope and heat balance methods. The thermal power obtained by the heat balance method at low power, half power, and full power was $3.7{\pm}0.2kW$, $15.2{\pm}1.2kW$, and $30.7{\pm}2.5kW$, respectively. The thermal power obtained by the slope method at half power and full power was $15.8{\pm}0.7kW$ and $30.2{\pm}1.5kW$, respectively. It was observed that the slope method is more accurate with deviations of 4% and 5% for calibrations at half and full power, respectively, although the linear fit (slope method) on average temperature-rising rates during the thermal power calibration procedure at low power (3.6 kW) is not fitting. As such, the slope method of power calibration is not suitable at lower power for NIRR-1.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.51-60
• /
• 1991

The main objective of this study is to examine the adaptability for the large watershed of the storage tank model which can be applied for the analysis of both long and short terms runoff developed on the basis of hydrologic data for a smaH mountaineous watershed. The results obtained in this study are summarized as follows ; 1. Areal rainfalls of the Dae Chong watershed were calculated by Thiessen method composed of 9 Thiessen networks. 2. Optimal parameters for two types, Model A and Model B of tank models were derived through calibration procedure by standardized Powell method. 3. Monthly simulated flows of Model B are seemed to be closer to the monthly observed than those of Model A during calibration period in the long terms runoff. 4. Relative errors for the simulated flood flows of Model B were apperaed as lower percentage to the observed than those of Model A during calibration period in the short terms runoff. 5. Daily simulated hydrographs of Model B are seemed to be closer to the daily observed than those of Model A during verification period in the long terms runoff. Significance of Model B was highly acknowledged in comparison with Model A in the correlation analysis between annual observed and annual simulated runoff. 6. Reproducibility of simulated flows for Model B is generally seemed to be better than that of Model A during calibration period in the short terms runoff. 7. It can be concluded that reproducibility of Model B is superior to that of Model A in the long and short terms runoff even a large watershed like the result of the small one. 8. It was verified that adaptability for the large watershed of Model B is superior to that of Model A between the two models which were developed by a small watershed characteristics for both long and short terms runoff. 9. Further study for getting a suitable tank model is desirable to be established by the decision, calibration method of initial parameters of tank model and by additional application of another watershed with different watersheds and meterological characteristics.

• 한국해안해양공학회지
• /
• 제10권3호
• /
• pp.109-119
• /
• 1998

수평 2차원 POM (Princeton Ocean Model)을 바닥마찰과 개방경계조건에 대하여 수정하고, 간석지를 모의하기 위하여 wetting-and-drying 기법을 첨가하여 천수만과 인근연안에 적용하였다. 연구해역의 주된 기작인 조석에 의한 해수유통만을 고려하였다. 본 논문은 천수만 해역에서의 모델 보정과 검증 절차 및 결과를 제시한다. 조석표의 평균 조석 특성을 이용하여 모델영역 전반에 걸쳐 진폭과 위상을 포함하는 조석파의 전파에 대하여 모델을 보장하였고, 보정 결과가 조석파를 잘 재현하였다. 보정된 모델을 1995년 여름 관측된 해수면 변위와 유속에 대한 시계열 자료를 이용하여 검증하였고, 검증 결과가 조석 및 조류를 잘 재현하였다. 보정 및 검증 결과가 본 모델이 천수만 해역에서 조석 현상을 잘 재현할 수 있음을 보여주었다

• 센서학회지
• /
• 제22권6호
• /
• pp.404-409
• /
• 2013

We devised calibration procedure for industrial thermometers by a comparison method at the boiling point of nitrogen (${\sim}-196^{\circ}C$). The uncertainty of the calibration was 4 mK (k = 2). As experimentally demonstrated in this work, the effect of the atmospheric pressure on the boiling point of nitrogen can be easily detected by the thermometer. Therefore, when the boiling point of nitrogen is used for calibration of thermometer by comparison, either a reference thermometer must be used to provide the reference temperature or the effect of atmospheric pressure should be carefully considered. The use of a copper block with a large thermal mass soaked into the liquid nitrogen was proven to be more reliable, and the stability of the temperature immersed into the copper block was 1.4 mK. The temperatures at the thermometer wells, evaluated by the crossed-measurement method to compensate for the inaccuracy of the thermometers and the linear drift of the temperature of the copper block, were equivalent within 0.23 mK of standard uncertainty.

• 비파괴검사학회지
• /
• 제26권4호
• /
• pp.246-254
• /
• 2006

방사선 측정분야에서 사용되는 감마 서베이미터의 교정데이터 자동처리를 위한 전산 프로그램을 개발하였다. 전산 프로그램은 Visual Basic을 기반으로 개발되었으며, 교정과정에 따라 단계별로 윈도우를 제작하고 코드화하였다. 교정 데이터의 자동처리를 위해 Microsoft Excel 프로그램을 제어하여 미리 자동 연산된 엑셀 셀 내에 데이터가 입력되도록 하였다. 개발프로그램 성능평가의 일환으로 검증된 데이터와 프로그램에서 출력된 데이터를 비교한 결과, 교정인자 산출 및 불확도 평가에서 동일한 결과가 나왔다. 또한, 개발프로그램을 교정업무에 적용시킨 결과, 업무의 효율성 및 정확성은 증가하였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1141-1141
• /
• 2001

The aim of the study was to evaluate the performance of 3 calibration methods, modified partial least squares (MPLS), local PLS (LOCAL) and artificial neural network (ANN) on the prediction of chemical composition of forages, using a large NIR database. The study used forage samples (n=25,977) from Australia, Europe (Belgium, Germany, Italy and Sweden) and North America (Canada and U.S.A) with information relative to moisture, crude protein and neutral detergent fibre content. The spectra of the samples were collected with 10 different Foss NIR Systems instruments, which were either standardized or not standardized to one master instrument. The spectra were trimmed to a wavelength range between 1100 and 2498 nm. Two data sets, one standardized (IVAL) and the other not standardized (SVAL) were used as independent validation sets, but 10% of both sets were omitted and kept for later expansion of the calibration database. The remaining samples were combined into one database (n=21,696), which was split into 75% calibration (CALBASE) and 25% validation (VALBASE). The chemical components in the 3 validation data sets were predicted with each model derived from CALBASE using the calibration database before and after it was expanded with 10% of the samples from IVAL and SVAL data sets. Calibration performance was evaluated using standard error of prediction corrected for bias (SEP(C)), bias, slope and R2. None of the models appeared to be consistently better across all validation sets. VALBASE was predicted well by all models, with smaller SEP(C) and bias values than for IVAL and SVAL. This was not surprising as VALBASE was selected from the calibration database and it had a sample population similar to CALBASE, whereas IVAL and SVAL were completely independent validation sets. In most cases, Local and ANN models, but not modified PLS, showed considerable improvement in the prediction of IVAL and SVAL after the calibration database had been expanded with the 10% samples of IVAL and SVAL reserved for calibration expansion. The effects of sample processing, instrument standardization and differences in reference procedure were partially confounded in the validation sets, so it was not possible to determine which factors were most important. Further work on the development of large databases must address the problems of standardization of instruments, harmonization and standardization of laboratory procedures and even more importantly, the definition of the database population.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.857-861
• /
• 2004

This paper describes preliminary results we have obtained in developing a computer vision system based on active IR illumination for real time gaze tracking for interactive graphic display. Unlike most of the existing gaze tracking techniques, which often require assuming a static head to work well and require a cumbersome calibration process for each person, our gaze tracker can perform robust and accurate gaze estimation without calibration and under rather significant head movement. This is made possible by a new gaze calibration procedure that identifies the mapping from pupil parameters to screen coordinates using the Generalized Regression Neural Networks (GRNN). With GRNN, the mapping does not have to be an analytical function and head movement is explicitly accounted for by the gaze mapping function. Furthermore, the mapping function can generalize to other individuals not used in the training. The effectiveness of our gaze tracker is demonstrated by preliminary experiments that involve gaze-contingent interactive graphic display.

• 로봇학회논문지
• /
• 제13권3호
• /
• pp.190-197
• /
• 2018

Geomagnetic field signals have potential for use in underwater navigation and geophysical surveys. To map underwater geomagnetic fields, we propose a method that exploits an autonomous surface vehicle. In our system, a magnetometer is rigidly attached to the vehicle and not towed by a cable, minimizing the system's size and complexity but requiring a dedicated calibration procedure due to magnetic distortion caused by the vehicle. Conventional 2D methods can be employed for the calibration by assuming the horizontal movement of the magnetometer, whereas the proposed 3D approach can correct for horizontal misalignment of the sensor. Our method does not require a supporting crane system to rotate the vehicle, and calibrates and maps simultaneously by exploiting data obtained from field operation. The proposed method has been verified experimentally in inland waters, generating a magnetic field map of the test area that is of much higher resolution than the public magnetic field data.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.620-623
• /
• 2005

KARI has prepared Calibration and Validation activities for the KOMPSAT-2 (KOrea Multi-Purpose SATellite-2) MSC data that will be launched at the end of this year. Firstly, we divided the Cal/Val activities of it to four parts, Spatial, Spectral, Radiometric and Geometric, and defmed the detailed Cal/Val items from them. Secondly, Cal/Val targets have been defined and manufactured for the role of them. Thirdly, we have made the plan and the procedure for the Cal/Val items, developed the codes for them, studied more detailed method to do them, and trained the Cal/Val activities using the foreign satellite image data by ourselves. KARI has been now setting up the KOMPSAT-2 LEOP plan with the Cal/Val activities, and probably will finish the EOP Cal/Val activities for the KOMPSAT-2 MSC data by the next April or May.