• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.566-574
• /
• 2013

In this paper, direct power control system for three-phase PFC AC/DC converter without the source voltage sensors is proposed. The sinusoidal input current and unity effective power factor are realised based on the estimated flux in the observer. Both active and reactive power calculated using estimated flux. The estimation of flux is performed based on the reduced-order virtual flux observer using the actual currents and the command control voltage. Moreover, source voltage sensors are replaced by a estimated flux. DC output voltage has been compensated by DC output ripple voltage estimation algorithm. The active and reactive powers estimation are performed based on the estimated flux and Phase angle. The proposed algorithm is verified through simulation and experiment.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.9
• /
• pp.928-933
• /
• 1990

In the vector controlled induction machine drives, mechanical speed sensors such as shaft encoder and resolver have been used. However, the mechanical speed sensors present some problems and restrict the wide applications of high performance AC drives. This paper describes the vector strategy with the speed estimation algorithm in which motor slip frequency is calculated. Also, the angle deviation of the rotor flux vector is calculated and instantaneously compensated to keep the q axis flux zero in the rotational reference frame.

• Korean Journal of Materials Research
• /
• v.32 no.7
• /
• pp.320-325
• /
• 2022

Single OLED and tandem OLED was manufactured to analyze the electroluminescence characteristics of DC driving, AC driving, and full-wave rectification driving. The threshold voltage of OLED was the highest in DC driving, and the lowest in full-wave rectification driving due to an improvement of current injection characteristics. The luminance at a driving voltage lower than 10.5 V (8,534 cd/m²) of single OLED and 20 V (7,377 cd/m²) of a tandem OLED showed that the full-wave rectification drive is higher than that of DC drive. The luminous efficiency of OLED is higher in full-wave rectification driving than in DC driving at low voltage, but decrease at high voltage. The full-wave rectification power source may obtain higher current density, higher luminance, and higher current efficiency than the AC power source. In addition, it was confirmed that the characteristics of AC driving and full-wave rectification driving can be predicted from DC driving characteristics by comparing the measured values and calculated values of AC driving and full-wave rectification driving emission characteristics. From the above results, it can be seen that OLED lighting with improved electroluminescence characteristics compared to DC driving is possible using full-wave rectification driving and tandem OLED.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.1
• /
• pp.43-46
• /
• 2007

Solenoid coil is one of the commonly used one in superconducting power machines because it can produce uniform magnetic field at the center of the coil. Most of the AC loss in a solenoid coil is magnetization loss which is generated by the perpendicular magnetic field. This paper compares the electrical characteristics of two solenoid coils made of YBCO wire and BSCCO wire. We made and tested the BSCCO solenoid coil and YBCO solenoid coil which had the same number of turns and inner diameter. Number of turns and inner diameter of both coils were 30 turns and 10cm, respectively. AC loss of both coils were calculated by using the finite element method. Result shows that AC loss of YBCO coil was about 1/7 of that of the BSCCO coil when the current was 40A.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.688-694
• /
• 2009

In this paper, we present the results of a preliminary study on the piezoelectric energy harvesting performance of a Zr-doped $PbMg_{1/3}Nb_{2/3}O_3-PbTiO_3$ (PMN-PZT) single crystal beam. A novel piezoelectric beam cantilever structure is used to demonstrate the feasibility of generating AC voltage during a state of vibration. The energy-harvesting capability of a PMN-PZT beam is calculated and tested. The frequency response of the cantilever device shows that the first mode resonance frequency of the excitation model exists in the neighborhood of several hundreds of hertz, which is similar to the calculated value. These tests show that several significantly open AC voltages and sub-mW power are achieved. To test the possibility of a small scale power source for a ubiquitous sensor network service, energy conversion and the testing of storage experiment are also carried out.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.808-809
• /
• 2008

22.9kV 50MVA HTS power cable has been developed and tested by Korea Electrotechnology Research Institute and LS Cable Company and it was supported by a grant from Center for Applied Superconductivity Technology of the 21st Century Frontier R&D Program. In this paper, DC Ic of 100m HTS cable which is installed at Kochang testing station was measured and analyzed. A measurement technique of DC Ic used by resistance and inductance removal method is established. The HTS power cable is composed of 2 layers for transmission and 1 layer for shield. For the analysis of AC losses in an HTS power cable, 2-dimensional numerical calculation was carried out to define the magnetic field distribution. We calculated the magnetization losses in the HTS core of that cable from these fields. These calculated results are in accordance with those of experiment.

• Journal of the Korean Society of Safety
• /
• v.27 no.4
• /
• pp.7-12
• /
• 2012

In this study, the solidification characteristics inside the AC7A casting material was analyzed using the numerical analysis method and was verified using the experimental method by the pre-heated temperature conditions of metal casting device. For the numerical analysis, "COMSOL Multiphysics", the commercial code based on the finite element analysis(FEA), was used in order to predict the thermal deformation of the AC7A casting material including temperature, displacement and stress distribution. Also, in order to verify the results calculated by the numerical analysis, the experiment for temperature measurement inside the AC7A casting material was performed using the K-type thermocouple under the same condition of numerical analysis method. In the numerical results, thermal deformation inside AC7A casting material was well-suited for manufacturing products when the pre-heated temperatures of the metal casting device was $250^{\circ}C$. When the results of the temperature distribution were experimentally measured and were compared with those of the numerical result, it appeared that there was some temperature difference because of the latent heat by phase change heat transfer. However, the result of cooling temperature and patterns were almost similar except for the latent heat interval. The solidification characteristics was closely related to the temperature difference between the surface and inside of the casting.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.294-296
• /
• 1995

In this paper, a vector control method for a AC-Excited BLSM(Brushless Synchronous Motor) is proposed. The BLSM has a feature that separate exciter is not needed for excitation. The proposed method is described in two parts as follow, one is the design of drive and the other is a modeling for its implementation. Rotor flux is estimated using indirect sensing method based on voltage equation in the synchronously rotation reference frame. And rotor position is calculated from rotor angular velocity and stator current. Through computer simulation results of this proposed system, it is shown that the BLSM drive has a ability of precision torque control from the static and dynamic performance.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8265-8270
• /
• 2016

Purpose: A cost-utility analysis was performed to assess the cost-utility of neoadjuvant chemotherapy regimens containing doxorubicin and cyclophosphamide (AC) versus paclitaxel and gemcitabine (PG) for locally advanced breast cancer patients in Iran. Materials and Methods: This cross-sectional study in Namazi hospital in Shiraz, in the south of Iran covered 64 breast cancer patients. According to the random numbers, the patients were divided into two groups, 32 receiving AC and 32 PG. Costs were identified and measured from a community perspective. These items included medical and non-medical direct and indirect costs. In this study, a data collection form was used. To assess the utility of the two regimens, the European Organization for Research and Treatment of Cancer Quality of Life Questionnaire-Core30 (EORTC QLQ-C30) was applied. Using a decision tree, we calculated the expected costs and quality adjusted life years (QALYs) for both methods; also, the incremental cost-effectiveness ratio was assessed. Results: The results of the decision tree showed that in the AC arm, the expected cost was 39,170 US$ and the expected QALY was 3.39 and in the PG arm, the expected cost was 43,336 dollars and the expected QALY was 2.64. Sensitivity analysis showed the cost effectiveness of the AC and ICER=-5535 US$. Conclusions: Overall, the results showed that AC to be superior to PG in treatment of patients with breast cancer, being less costly and more effective.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.4123-4126
• /
• 2015

Background: Carcinoma of the esophagus is associated with significant morbidity and mortality. The most common subtype is squamous cell carcinoma (SCC). In the past three decades, the incidence of SCC has been reported to be decreasing whereas esophageal adenocarcinoma (AC) is increasing. This study assessed the trend of esophageal cancer in Brunei Darussalam over a three decades period. Materials and Methods: The National Cancer registry was searched for esophageal cancers from 1986 to 2012. Data on age, gender, racial groups (Malays, Chinese, Indigenous and foreign nationals) and histology type were collected. The rate (ASR) and Age Specific Incidence rate (ASIR) were calculated. Results: The predominant tumor type was SCC which accounted for 89% of all esophageal cancer. The gender ratio was 2.25: 1 (male: female) and the mean age at diagnosis was $66.9{\pm}12.9$ years, significantly younger for esophageal AC ($57.2{\pm}16.0$) compared to SCC ($68.1{\pm}12.0$, p<0.05), and among the foreign nationals (p<0.05 for trend). The proportions of SCC among all esophageal cancers in the various racial groups were: Malays (87.8%), Chinese (100%), Indigenous (100%) and foreign nationals (20%). None of the Chinese and Indigenous groups were diagnosed with esophageal AC. The overall ASR for esophageal cancer was 2.1/100,000; 2.0/100,000 for SCC with a declining trend and 0.17/100,000 for esophageal AC, without any trend observed. Among the two major racial groups; the Chinese has higher ASR (3.42/100,000) compared to the Malays (ASR 0.95/100,000). Conclusions: SCC is the predominant tumor type of esophageal cancer in Brunei Darussalam and more common among the Chinese. There was a declining trend in the incidence of SCC but not for esophageal AC.