• 제목/요약/키워드: Calcium oxide powder

검색결과 29건 처리시간 0.031초

Effect of Admix Ratio of Free-machining Agent 'KSX' that Contains Complex Calcium Oxide Powder on Machinability

  • Furuta, Satoshi;Masuda, Shinsuke
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.297-298
    • /
    • 2006
  • Free-machining agent 'KSX' contains complex calcium oxide is developed. The effect of admix ratio of KSX on mechanical properties and machinability with two different cutting speeds is reported. KSX displays improved machinability without deterioration of mechanical properties up to 0.3mass% addition. It was observed that KSX is effective with a small addition of 0.1mass% at slower cutting speed, and increased of admix ratio is effective at faster cutting speed.

  • PDF

환원-확산법에 의한 Sm-Fe 합금분말 제조시 Sm2O3 첨가량의 영향 (The Effect of Excess Samarium Oxide on the Preparation of Sm-Fe Alloy Powder by Reduction-diffusion Method)

  • 곽훈;이정구;최철진
    • 한국분말재료학회지
    • /
    • 제16권5호
    • /
    • pp.336-341
    • /
    • 2009
  • To produce alloy powders with only Sm$_2$Fe$_{17}$ single phase by reduction-diffusion (R-D) method, the effect of excess samarium oxide on the preparation of Sm-Fe alloy powder during R-D heat treatment was studied. The quantity of samarium oxide was varied from 5% to 50% whereas iron and calcium were taken 0% and 200% in excess of chemical equivalent, respectively. The pellet type mixture of samarium, iron powders and calcium granulars was subjected to heat treatment at 1100$^{\circ}C$ for 5 hours. The R-D treated pellet was moved into deionized water and agitated to separate Sm-Fe alloy powders. After washing them in deionized water several times, the powders were washed with acetic acid to remove the undesired reaction products such as CaO. By these washing and acid cleaning treatment, only 0.03 wt% calcium remained in Sm-Fe alloy powders. It was also confirmed that the content of unreacted $\alpha$-Fe in Sm$_2$Fe$_{17}$ matrix gradually decreased as the percentage of samarium oxide is increased. However, there was no significant change above 40% excess samarium oxide.

굴 패각 분말로부터 벌크 세라믹 구조체 제조 (Consolidation to Bulk Ceramic Bodies from Oyster Shell Powder)

  • 조경식;이현권;민재홍
    • 한국분말재료학회지
    • /
    • 제23권3호
    • /
    • pp.221-227
    • /
    • 2016
  • Waste oyster shells create several serious problems; however, only some parts of them are being utilized currently. The ideal solution would be to convert the waste shells into a product that is both environmentally beneficial and economically viable. An experimental study is carried out to investigate the recycling possibilities for oyster shell waste. Bulk ceramic bodies are produced from the oyster shell powder in three sequential processes. First, the shell powder is calcined to form calcium oxide CaO, which is then slaked by a slaking reaction with water to produce calcium hydroxide $Ca(OH)_2$. Then, calcium hydroxide powder is formed by uniaxial pressing. Finally, the calcium hydroxide compact is reconverted to calcium carbonate via a carbonation reaction with carbon dioxide released from the shell powder bed during firing at $550^{\circ}C$. The bulk body obtained from waste oyster shells could be utilized as a marine structural porous material.

난각으로부터 합성된 초미립 CaO 분말을 이용한 C3S, C2S, C3A 분말 합성 및 혼합 경화체에 미치는 C3A 함량의 영향 (Synthesis of C3S, C2S, C3A Powders using Ultra-fine Calcium Oxide Powder Synthesized from Eggshell and Effect of C3A Content on Hardened Mixed Aggregates)

  • 공헌;권기범;박상진;노효섭;이상진
    • 한국분말재료학회지
    • /
    • 제26권6호
    • /
    • pp.493-501
    • /
    • 2019
  • In this work, ultra-fine calcium oxide (CaO) powder derived from eggshells is used as the starting material to synthesize mineral trioxide aggregate (MTA). The prepared CaO powder is confirmed to have an average particle size of 500 nm. MTAs are synthesized with three types of fine CaO-based powders, namely, tricalcium silicate (C3S), dicalcium silicate (C2S), and tricalcium aluminate (C3A). The synthesis behavior of C3S, C2S and C3A with ultra-fine CaO powder and the effects of C3A content and curing time on the properties of MTA are investigated. The characteristics of the synthesized MTA powders are examined by X-ray diffraction (XRD), field emission-scanning electron microscope (FE-SEM), and a universal testing machine (UTM). The microstructure and compressive strength characteristics of the synthesized MTA powders are strongly dependent on the C3A wt.% and curing time. Furthermore, MTA with 5 wt.% C3A is found to increase the compressive strength and shorten the curing time.

갑오징어갑으로부터 칼슘의 추출을 위한 전처리 방법의 검토 (Study on Pretreatment Methods for Calcium Extraction from Cuttle Bone)

  • 조문래;허민수;김진수
    • 한국수산과학회지
    • /
    • 제34권5호
    • /
    • pp.483-487
    • /
    • 2001
  • 갑오징어 가공 부산물인 갑으로부터 유용 칼슘을 효율적으로 추출하기 위하여 소성처리 ($800^{\circ}C$, 2시간), 고온가압처리 ($121^{\circ}C$, 10시간) 및 초음파처리 ($60^{\circ}C$, 10시간)와 같은 전처리 방법에 대하여 검토하였다 소성처리에 의한 칼슘 추출 분말의 경우 백색이었으나, 기타 추출법으로 처리되어진 칼슘 분말의 경우 연노랑색을 나타내었다 소성처리에 의한 갑 분말의 칼슘함량은 $70.5\%$로 원료 및 다른 전처리 방법에 비하여 약 2배정도 증가하였다 전 처리 방법에 따른 칼슘의 가용화율은 원료에 비하여 초음파처리 및 고온가압처리의 경우 약간 감소하였으나, 소성처리한 경우 약 22배가 증가하였다. 이상의 칼슘제로서 가장 중요한 품질지표인색조, 칼슘 가용화율 및 순도 둥으로 미루어 보아 전처리 방법으로는 소성처리가 가장 우수하였다. 소성처리 시료를 RED 상분석한 결과 주성분은 산화칼슘이었다. 그러나, 소성처리에 의한 칼슘 추출 분말의 경우 pH가 12.9로 강알칼리를 나타내어 안전성 측면에서 식품품질 개선제 둥으로 사용하기에는 다소 문제가 있었다. 이상의 결과로 미루어 보아 갑오징어갑으로부터 칼슘을 추출하는 방법으로는 소성처리가 가장 우수하였으나, 강알칼리로 인해 식품 품질개선제 등과 같이 효율적으로 이용하기 위하여는 반드시 중성부근의 pH로 조정이 이루어져야 하리라 판단되었다.

  • PDF

X-Ray Diffraction Analysis of Various Calcium Silicate-Based Materials

  • An, So-Youn;Lee, Myung-Jin;Shim, Youn-Soo
    • 치위생과학회지
    • /
    • 제22권3호
    • /
    • pp.191-198
    • /
    • 2022
  • Background: The purpose of this study was to evaluate the composition of the crystal phases of various calcium silicate-based materials (CSMs): ProRoot white MTA (mineral trioxide aggregate) (WMTA), Ortho MTA (OM), Endocem MTA (EM), Retro MTA (RM), Endocem Zr (EN-Z), BiodentineTM (BD), EZ-sealTM (EZ), and OrthoMTA III (OM3). Methods: In a sample holder, 5 g of the powder sample was placed and the top surface of the material was packed flat using a sterilized glass slide. The prepared slides were mounted on an X-ray diffraction (XRD) instrument (D8 Advance; Bruker AXS GmbH, Germany). The X-ray beam 2θ angle range was set at 10~90° and scanned at 1.2° per minute. The Cu X-ray source set to operate at 40 kV and 40 mA in the continuous mode. The peaks in the diffraction pattern of each sample were analyzed using the software Diffrac (version 2.1). Then, the peaks were compared and matched with those of standard materials in the corresponding Powder Diffraction File (PDF-2, JCPDS International Center for Diffraction Data). A powder samples of the materials were analyzed using XRD and the peaks in diffraction pattern were compared to the Powder Diffraction File data. Results: Eight CSMs showed a similar diffraction pattern because their main component was calcium silicate. Eight CSMs showed similar diffraction peaks because calcium silicate was their main component. Two components were observed to have been added as radiopacifiers: bismuth oxide was detected in WMTA, OM, and EM while zirconium oxide was detected in RM, EN-Z, BD, EZ, and OM3. Unusual patterns were detected for the new material, OM3, which had strong peaks at low angles. Conclusion: It was caused by the presence of Brushite, which is believed to have resulted in crystal growth in a particular direction for a specific purpose.

충전재의 종류에 따른 유리/노볼락 복합재료의 기계적 및 열적 성질 연구 (Effect of Fillers on the Mechanical and Thermal Properties of Glass/Novolac Composites)

  • 이수;이인규;박상희
    • 한국응용과학기술학회지
    • /
    • 제25권1호
    • /
    • pp.15-22
    • /
    • 2008
  • The effects of fillers on the mechanical and thermal properties of glass/novolac composites have been studied. The matrix polymer and reinforcement were novolac type phenolic resin and milled glass fiber, respectively. Three different fillers, such as calcium carbonate, aluminum oxide, and wood powder were used for glass fiber reinforced plastic(GFRP) manufacture. Gravity, moisture content, tensile and flexural strength were measured to analyze the mechanical properties of GFRP and the final composites was burned in the electronic furnace at $1000^{\circ}C$ to confirm thermal properties GFRP containing aluminium oxide shows the highest thermal stability with 32% of weight loss at $1000^{\circ}C$ for one hour. GFRP containing calcium carbonate shows the maximum flexural strength (146 MPa), but that containing wood powder dose the highest tensile strength (65 MPa). Conclusively, we found that the characteristics of final composites strongly depend on several factors, such as types of materials, contents and chemical affinity of fillers. Therefore, it is very important to set up the combination of fillers for GFRP manufacturing to improve both mechanical and thermal properties at the same time.

천연칼슘소재로서 개조개(Saxidomus purpuratus)와 바지락(Ruditapes philippinarum) 패각 및 소성분말의 특성 (Characteristics of the Shells and Calcined Powders from the Butter Clam Saxidomus purpuratus and Littleneck Clam Ruditapes philippinarum as a Natural Calcium Resource)

  • 김진수;정남영;장수정;이현지;박성환;김민주;허민수
    • 한국수산과학회지
    • /
    • 제48권2호
    • /
    • pp.168-177
    • /
    • 2015
  • Shell waste from the butter clam Saxidomus purpuratus and littleneck clam Ruditapes philippinarum is a large by-product of shellfish aquaculture, and it is desirable to convert it into value-added products for industrial applications. In this study, calcium carbonate (CaC) polymorphs from butter clam (BCSP) and littleneck clam (LCSP) shell powders and commercial CaC were characterized using Fourier transmission infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results revealed that the optimal calcination conditions to eliminate organic substances and improve solubility for both BCSP and LCSP were $800^{\circ}C$ for 8 h in an electrical furnace. Calcination improved the white index of the butter clam (BCCP) and littleneck clam (LCCP) calcined powder compared with shell powders. The calcium content in BCCP (51.1%) was higher than that of LCCP (44.9%) or commercial calcium oxide (CaO, 44.7%). The XRD patterns of BCCP and LCCP were similar to that of CaO. Cubic-like crystals of CaC and irregular crystals of BCCP and LCCP were observed by SEM. The FT-IR and XRD analyses revealed the presence of calcite and aragonite in the BCSP and aragonite in the LCSP, whereas the CaC contained calcite. These results indicate that butter and littleneck clam shells are potential biomass resources for calcium carbonate and calcium oxide.

근관내 주요 혐기성 병인균에 대한 수종 항생제와 근관충전용 세멘트의 항균효과에 관한 연구 (ANTIMICROBIAL EFFECT OF ANTIBIOTICS AND ROOT CANAL CEMENTS ON THE PREDOMINANT PATHOGENIC ANAEROBIC MICROFLORA IN ROOT CANALS)

  • 배광식
    • Restorative Dentistry and Endodontics
    • /
    • 제18권2호
    • /
    • pp.515-525
    • /
    • 1993
  • The purpose of this study was to evaluate the susceptibility of anaerobic microorganisms to certain antibiotics and root canal cements. Prevotella intermedia(Bacteroides intermedius) ATCC 25611(serotype A), Fusobacterium nucleatum ATCC 25586, Actinomyces viscosus ATCC 15987 which are the predominant pathogenic anaerobes in dental root canals were cultured in BHI for 48 hours(Fig.1). After each $200{\mu}l$ of those broths with microorganisms was streaked on each surface of blood agar plate, 2 to 5 antibiotic discs which are impregnated with Tetrncycline, Erythromycin, Ampicillin, Clindamycin, or Vancomycin were applied on each surface of blood agar plate and cultured for 5 days anaerobically in the anaerobic chamber (Fig.2). 15 antibiotic discs for each kind of antibiotics and each species of microorganisms were tested. Also each kind of root canal cement tubes which include Zinc oxide eugenol cement, Zinc phosphate cement, Calcium hydroxide powder+DD.W., Calcium hydroxide paste(Pulpdent Tempcanal), or Vitapex(Table 1) were applied on the inoculated BAPs after $200{\mu}l$ of each experimental species of microorganisms was streaked on the surface of blood agar plates, and they were cultured for 5 days anaerobically in the anaerobic chamber(Fig.3). The sensitivity(antimicrobial effect) was determined by the diameter of the inhibition zone. The results are as follows: 1. The results of antibiotic susceptibility test(Table 2) 1) All of the tested antibiotics had antimicrobial activity with various degrees. 2) In Prevotella intermedia (old Bacteroides intermedius), the diameter of inhibition zone to Erythromycin($37.87mm{\pm}2.20$) was largest, those to Tetracycline($26.20mm{\pm}2.96$), Vancomycin($21.53mm{\pm}1.96$), Clindamycin($18.73mm{\pm}0.96$) was smaller than former orderly, and That to Ampicillin ($7.87mm{\pm}0.83$) was smallest. 3) In Actinomyces viscosus, the diameter of inhibition zone to Erythromycin($28.73mm{\pm}1.22$) was largest, those to Ampicillin($21.73mm{\pm}1.03$), Clindamycin($21.33mm{\pm}1.59$) was similarly next order, that to Vancomycin($19.00mm{\pm}1.96$) was smaller than Clindamycin, and that to Tetracycline($11.93mm{\pm}0.70$) was smallest. 4) In Fusobacterium nucleatum, the diameter of inhibition zone to Ampicillin($31.07mm{\pm}1.91$) was largest, that to Erythromycin($28.87mm{\pm}0.92$), Clindamycin($20.47mm{\pm}1.51$), Vancomycin ($16.73mm{\pm}0.96$), Tetracycline ($12.13mm{\pm}1.06$) are smaller than former orderly. 2. The results of root canal cements and pastes(Table 3) 1) The external diameter of tube is 4mm, so 4mm of the inhibition zone diameter means non-susceptable. Prevotella intermedia (old Bacteroides intermedius) was non-susceptable to Calcium hydroxide powder+D.D.W., Calcium hydroxide paste(pulpdent Tempcanal), and Actinomyces viscosus was non-susceptable to Zinc phosphate cement, Calcium hydroxide powder + D.D.W., Calcium hydroxide paste(pulpdent Tempcanal). 2) In Prevotella intermedia (old Bacteroides intermedius), the diameter of inhibition zone to Zinc oxide eugenol cement($13.67mm{\pm}3.30$) was largest, that to Vitapex($9.20mm{\pm}2.96$), Zinc phosphate cement($6.13mm{\pm}2.07$) was smaller than former. 3) In Actinomyces viscosus, the diameter of inhibition zone to Zinc oxide eugenol cement($17.40mm{\pm}5.20$) was largest and that to Vitapex($8.80mm{\pm}1.70$) was next order. 4) In Fusobacterium nucleatum, the diameter of inhibition zone to Vitapex($42.33mm{\pm}17.2$) was largest and those to Calcium hydroxide paste(Pulpdent Tempcanal)($14.47mm{\pm}3.72$) and Zinc oxide eugenol cement($8.93mm{\pm}2.71$), Zinc phosphate cement($8.20mm{\pm}2.27$), Calcium hydroxide powder+D.D.W.($5.53mm{\pm}2.10$)was next orderly. And then In Zinc oxide eugenol cement and Zinc phosphate cement group, two of fifteen samples showed no inhibition zone, in Calcium hydroxide powder + D.D.W. group, 8 of 15 samples showed no inhibition zone.

  • PDF

Calcium oxide(CaO)를 활용한 깻잎 중 존재하는 자연균총 및 주요 식중독균의 제어 (Bacteriocidal Effect of Calcium oxide (CaO, Scallop-shell Powder) on Natural Microflora and Pathogenic Bacteria in Sesame Leaf)

  • 연지혜;이동하;하상도
    • 한국식품과학회지
    • /
    • 제37권5호
    • /
    • pp.844-849
    • /
    • 2005
  • 본 연구에서는 천연물질유래 살균소독제인 CaO가 깻잎 중 존재하는 자연균총, E. coli, L. monocytogenes, S. typhimurium에 미치는 저해효과를 알아보았고 chlorine, ethanol, hydrogen peroxide 등과 같은 주요 chemical sanitizer와 비교하였다. CaO를 농도별(0.05-0.2%), 시간별(2-10분) 처리했을 때 총호기성균은 $0.55-1.49\;log_{10}CFU/g$, 대장균은 $0.85-2.56\;log_{10}CFU/g$, E. coli는 $0.16-1.08\;log_{10}CFU/g$, L. monocytogenes는 $0.30-1.14\;log_{10}CFU/g$, S. typhimurium은 $0.19-1.07\;log_{10}CFU/g$의 감소를 보였으며, 특히 0.2%에서는 일반적으로 사용되는 100 ppm의 chlorine, 20% 이내의 ethanol, 1%의 hydrogen peroxide만큼 우수한 살균효과를 보였다. 본 연구에 따라 CaO는 기존의 화학적 살균제를 대체할 수 있는 좋은 천연물질유래 살균소독제로 활용될 수 있을 것이다.