• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.257-265
• /
• 2010

The objective of study was carried out to investigate the proper nutrient nitrogen concentration and irrigation period for increasing plant growth and flowering in Ardisia pusilla. Nutrient nitrogen concentrations were 120, 150, 180 and $210\;mg{\cdot}L^{-1}$ and they were based on the Sonneveld solution. Irrigation periods were divided into ED (except dormancy) and TG (total growth) according to plant age. The results of plant age and irrigation period, growth of 1 year-old plant was promoted by nitrogen concentration above $150\;mg{\cdot}L^{-1}$ regardless of irrigation period. And plant growth values of 2 years-old in TG treatments were higher than ED treatments, especially TG-180 treatment was best of all. The contents of total nitrogen of leaves after flowering were increased with nutrient nitrogen strength. And the contents of potassium, calcium, magnesium and phosphate slightly were decreased or were no significant differences. Plant growth and flowering decreased when nitrogen concentration was over $210\;mg{\cdot}L^{-1}$. Therefore, TG-150 and TG-180 were supposed to be appropriate treatment for plant growth and flowering of 1year-old plant and 2 years old plant, respectively.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.13-18
• /
• 1988

This experiment was conducted to identify the enzyme treatment time, calcium ion effect, enzyme concentration and leaf position for protoplast isolation. It was also performed to determine the adequate molarity on protoplasts, and to investigate the incubation time, pH, PEG concentration and DMSO effect for protoplast fusion. The results obtained were summarized as follows ; The optimal time of incubation in enzyme solution was 4 hours. And the protoplast releasing time was delayed by $CaCl_2{\cdot}2H_2O$ addition to the enzyme solution compared with no added one. The viability had kept up to above 95% until the 4 hours after digestion. The high viability of the protoplast was preserved more than 16 hours by adding $CaCl_2{\cdot}2H_2O$ to digestion solution. The enzyme concentration had no effect on protoplast yield in range from 1% to 5% and the first or second leaf from the top of the plant produced the highest protoplast yield among the leaf position tested. The purity of healthy protoplast was better in 0.4M and 0.5M sucrose than in others, and the percentage of protoplast aggregation was more 20% to 50% in PEG 6,000 compared with 4,000 and PEG 1,500. Even though the percentage of protoplast aggregation was less increased by 3% to 7% than without DMSO, its treatment was effective to induce binucleated protoplasts.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.2
• /
• pp.79-86
• /
• 2016

The purpose of this study is to efficiently improve biological sequencing batch reactor (SBR) system of high-concentrated nitrate nitrogen in reverse osmosis (RO) concentrates by total dissolved solids (TDS) regulation. Since a laboratory-scale SBR system had been operated, we had analyzed specific denitrification rate (SDNR) and specific oxygen uptake rate (SOUR) for microbial activity in according to various injection concentration of TDS. As a result, higher injection concentration of TDS decreased SDNR, and delayed denitrification within denitrification process. Moreover, the higher injection concentration of TDS was, the lower microbial activity was during operation of laboratory-scale SBR system. Therefore, the regulation of TDS injection concentration is necessary to improve efficiency of nitrate nitrogen in the biological SBR system, and treatment of calcium ion ($Ca^{2+}$) is also specifically focused to remove nitrate nitrogen. Moreover, analytical data of SDNR and SOUR can be the effective kinetic design parameters to application of biological treatment of RO concentrate by aerobic granular sludge (AGS).

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.245-251
• /
• 1988

Thermolysin was immobilized on Dowex MWA-1 with 10% glutaraldehyde and incorpo rated into a fluidized-bed continuous coagulation scheme to make Cheddar type cheese. The activity yield of thermolysin was 25%. The immobillized thermolysin was stable at $60^{\circ}C$ in the presence of 1/200M calcium ions and the half-life value is 16 days at the temperature. Raw milk alkalified to pH 7.0 was passed through a column of thermolysin beads at $55^{\circ}C$, cultivated with Streptococcus cremoris and allowed to coagulate. A typical milk curd was formed to make Cheddar type cheese, avoiding troublesome microbial contamination successfully during continuous hydrolysis process. During ripening of this cheese for 6 months at $10^{\circ}C$, its ripening ratio and taste were similar to those of cheese prepared by the traditional method.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.632-637
• /
• 2014

A microfluidic method for the in situ production of monodispersed alginate hydrogels using biocompatible polymer gelation by crosslinker mass transfer is described. Gelation of the hydrogel was achieved in situ by the dispersed calcium ion in the microfluidic device. The capillary number (Ca) and the flow rate of the disperse phase which are important operating parameters mainly influenced the formation of three distinctive flow regions, such as dripping, jetting, and unstable dripping. Under the formation of dripping region, monodispersed alginate hydrogels having a narrow size distribution (C.V=2.71%) were produced in the microfluidic device and the size of the hydrogels, ranging from 30 to $60{\mu}m$, could be easily controlled by varying the flow rate, viscosity, and interfacial tension. This simple microfluidic method for the production of monodisperse alginate hydrogels shows strong potential for use in delivery systems of foods, cosmetics, inks, and drugs, and spherical alginate hydrogels which have biocompatibility will be applied to cell transplantation.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.879-886
• /
• 2010

This study investigated the removal characteristics of highly concentrated $NH_4$-N and $PO_4$-P by struvite crystallization using converter slag as a seed crystal. The optimal pH range for removal and recovery of $NH_4$-N and $PO_4$-P by struvite crystallization was measured to be 8.0~8.75, in which total removal efficiencies for $NH_4$-N and $PO_4$-P by struvite precipitation and crystallization were 34.3~61.0% and 91.0~96.2%, respectively. The maximum removal efficiencies for $NH_4$-N and $PO_4$-P by struvite crystallization were 29.4% at pH 8.5 and 65.1% at pH 8.0, respectively. The removal efficiency of $NH_4$-N by struvite crystallization decreased with increasing calcium ion concentration. The analysis results of SEM, EDS and XRD exhibited that $NH_4$-N and $PO_4$-P in meta-stable region of struvite crystallization could be eliminated through formation of magnesium ammonia phosphate (MAP) and hydroxyapatite (HAp) on seed crystals by struvite precipitation and crystallization.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.761-767
• /
• 1996

The composite fiber adsorbents containing amidoxime group were prepared and separation properties of uranium ion from seawater were investigated. The amount of uranium adsorption was increased with an increase in adsorption time. When the mole ratio of monomer and comonomer, such as acrylonitrile (AN), tetraethyleneglycol dimethacrylate(TEGMA), and divinylbenzene (DVB), were 1 :0. 1 :0.003, this resin showed the maximum adsorption ability for uranium at a level of pH 8. The amount of uranium adsorption was also increased linearly to one hour with an increase in the content of adsorbent which was added in the composite fiber adsorbents(CFA). The maximum adsorption for uranium of CF A showed at $25^{\circ}C$. Hence, the adsorption ability of CF A for calcium and magnecium ions were increased gradually by the recycling of adsorption and disorption, the adsorption content of their on were 0.3, 0.9mmole/g-adsorbents, respectly. It also showed that the adsorption contents of Ca and \1g ions were much lower than them of uranium. The desorption of uranium on the CF A was carried out , bout 100% within 30min, and the desorption rate of various CF A were equalled.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.261-267
• /
• 2015

To develop high-strength high-volume ground granulated blast-furnace slag (GGBFS) concrete, this study investigated the characteristics of strength development and durability of concrete with the water-to-binder ratio of 23% and the GGBFS replacement ratio of up to 65%. The results show that the compressive strength of GGBFS blended concrete is lower than that of ordinary Portland cement (OPC) concrete up to 3-day age, but the becomes higher after 7-day age. Together with strength increase, the pore structure becomes tighter, and thus the resistance to chloride ion penetration increases. Therefore, the GGBFS blended concrete has high resistance to freezing and thawing without additional air-entraining, and high resistance to carbonation despite low amount of calcium hydroxide ($Ca(OH)_2$). On the other hand, if silica fume (SF) is blended with GGBFS, the strength becomes lower than that of the concrete blended with GGBFS only, and the resistance to chloride ion penetration deceases. Therefore, it needs further studies on the reaction of SF in high-strength high-volume GGBFS concrete.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.204-210
• /
• 1997

Zeolite 4A-impregnated complex molecular sieve was prepared by hydrothermal reaction after aluminosilicate gel was penetrated into the pore of activated carbon granule. The crystals of zeolite 4A mainly were formed in the macropore of activated carbon, and their average diameter is $0.8{\mu}m$. The pore volume of activated carbon granule is $0.67m{\ell}/g$, and the pore volume of the sample including 21.6wt% of zeolite 4A crystal is $0.41m{\ell}/g$ decreasing the pore volume by 40% due to the crystallization of zeolite 4A crystals on the internal surface of activated carbon. The calcium ion exchange capacity of zeolite 4A-impregnated sample is 320mg $CaCO_3/g$ zeolite, and this value is almost the same as that of zeolite 4A powder. The crystal of zeolite 4A was not separated from the support of activated carbon granule in the course of ultrasonic dispersion. The adsorption isotherm of water on zeolite 4A-impregnated sample shows the intermediate shape between types, I and III. In addition, zeolite 4A-impregnated sample shows the hydrophilic and hydrophobic properties simultaneously.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.334-341
• /
• 2006

This study was to investigate the growth of planted red pine (Pinus densiflora S. et. Z.) seedling, soil properties and understory vegetation structure after fertilizer treatments [unfertilized plot (control), CF plot (Combination Fertilizer), UF plot (Urea Formaldehyde Fertilizer)] in a Pinus densiflora stand planted after the forest fires in Gosung, Gangwon province. The height growth rates of seedlings in four years were 264% in unfertilized, 404% in CF, and 388% in UF plots, respectively. The root collar diameters were increased 340% in unfertilized, 454% in CF, and 427% in UF plots, respectively. No significant changes occurred in soil total nitrogen and potassium ion ($K^+$) with the fertilization. However, available $P_2O_5$, content in the soil surface (0-15 cm) increased with the fertilizer application. Soil organic matter increased significantly with fertilizer treatments, while gradual decrease occurred in unfertilized plots. Sodium ion ($Na^-$) decreased in all sites. Soil pH, CEC, calcium ion ($Ca^{2+}$) and magnesium ion ($Mg^{2+}$) contents were not significantly different among treatments. Although Shannon's species diversity index and species richness in understory vegetation did not change with fertilizer treatments, vegetation cover rates in forest floor increased significantly with the fertilization. These results suggest that the increase of pine seedling growth and vegetation cover rates with fertilization could enhance soil stabilization in forest tire areas.