• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.257-274
• /
• 2018

The purpose of this study was to evaluate the effect of acid-treatment conditions on the surface properties of the RBM (Resorbable Blast Media) treated titanium. Disk typed cp-titanium specimens were prepared and RBM treatments was performed with calcium phosphate ceramic powder. Acid solution was mixed using HCl, $H_2SO_4$ and deionized water with 4 different volume fraction. The RBM treated titanium was acid treated with different acid solutions at 3 different temperatures and for 3 different periods. After acid-treatments, samples were cleaned with 1 % Solujet solution for 30 min and deionized water for 30 min using ultrasonic cleanser, then dried in the electrical oven ($37^{\circ}C$). Weight of samples before and after acid-treatment were measured using electric balance. Surface roughness was estimated using a confocal laser scanning microscopy, crystal phase in the surface of sample was analyzed using X-ray diffractometer. Surface morphology and components were evaluated using Scanning Electron Microscope (SEM) with Energy Dispersive X-ray spectroscopy (EDX) and X-ray Photoemission Spectroscopy (XPS). Values of the weight changes and surface roughness were statistically analyzed using Tukey-multiple comparison test (p=0.05). Weight change after acid treatments were significantly increased with increasing the concentration of $H_2SO_4$ and temperature of acid-solution. Acid-treatment conditions (concentration of $H_2SO_4$, temperature and time) did not produce consistent effects on the surface roughness, it showed the scattered results. From XRD analysis, formation of titanium hydrides in the titanium surface were observed in all specimens treated with acid-solutions. From XPS analysis, thin titanium oxide layer in the acid-treated specimens could be evaluated. Acid solution with $90^{\circ}C$ showed the strong effect on the titanium surface, it should be treated with caution to avoid the over-etching process.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2010

Fruit wine from Acanthopanax sessiliflorus(A. sessiliflorus) including many pharmacological components was manufactured and its functional properties were investigated. The fruit part of A. sessiliflorus contained 75.74${\pm}$0.49%(w/w) moisture, 12.51${\pm}$1.23%(w/w) crude protein, 4.20${\pm}$0.51.%(w/w) crude fat and 5.21${\pm}$1.64%(w/w) crude ash. Minerals of fruit were potassium(12.94${\pm}$0.08 mg/g), calcium(1.53${\pm}$0.06 mg/g) and magnesium(1.12${\pm}$0.05 mg/g). Initial soluble solid and fermentation temperature were 24-30$^{\circ}$Brix and 20${^{\circ}C}$ for manufacturing fruit wine from A. sessiliflorus. When initial soluble solid of a must was adjusted to more than 30$^{\circ}$Brix, ethanol production was suppressed slightly. The polyphenol content of the fruit wine fermented at 20${^{\circ}C}$(125.24${\pm}$1.86 mg/mL) was higher than those at 25${^{\circ}C}$(99.69${\pm}$2.11 mg/mL) and 30${^{\circ}C}$(95.55${\pm}$1.54 mg/mL). Electron donating activities of wines fermented at 20, 25 and 30${^{\circ}C}$ were 85.9${\pm}$2.3, 55.7${\pm}$2.5 and 55.2${\pm}$3.4%, respectively. The content of eleutheroside B increased up to 146.58${\pm}$4.10 $\mu$g/mL during fermentation. There was no significant effect of fermentation temperature on eleutheroside B content. The fruit part of A. sessiliflorus can be used as a valuable resource for development of nutraceutical foods.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.299-303
• /
• 2008

An Oriental lily cultivar 'Pacific Wave' was released in 2007 at National Institute of Horticultural and Herbal Science, Rural Development Administration (RDA), Suwon, Korea. The crossing was made in 1999 between Oriental lily 'Simplon', an outward-facing and white colored cultivar, and 'Spinoza', pink colored cultivar. The first selection was done in 2003 with a line of 'O-03-16'. Multiplication and bulb growth, and performance test was conducted from 2004 to 2006. This selection was later on given as 'Pacific Wave' in 2007 at NHRI. Flowering time of 'Pacific Wave' in plastics house culture is mid June and grows average 115 cm. Flowers are upward-facing with 20.1 cm in diameter and white with yellow centered (RHS W155C + Y9A). Mean petal length and width is 12.2 cm and 4.2 cm, respectively. Leaves are 12.3 cm long, 2.9 cm wide. The throat color is green. It shows gray and purple stigma, and red brown pollen. The weight and size of bulb is 82.5 g and 19.6 cm, respectively. Year-round flowering can be by storing the bulb under -1 to $-2^{\circ}C$ conditions. It is necessary to add calcium to the fertilizer or remove side scales to prevent leaf scorch. It is needed to control Botrytis disease in summer wet season.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.2
• /
• pp.112-117
• /
• 2008

Plug seedlings of vinca (Catharanthus roseus L. 'Pacifica Punch') and salvia (Salvia splendens F. Sellow ex Roem & Schult 'Maestro') were transplanted into square plastic pots (145 mL volume) filled with a soilless growing medium. To determine the effect of application rate on the growing medium EC and growth of plants, 0, 0.5, 1.0, 1.5, 2.0 and 4.0 g per pot of a controlled release fertilizer (14-14-14 Osmocote, 14N-6.2P-11.6K) were mixed with the growing medium. Plants were subirrigated daily with tap water. In both vinca and salvia, growing medium EC increased as application rate was elevated. Growing medium EC was relatively constant over a whole crop period when the application rate was less than 1.5 g per pot, while it decreased throughout the experiment at higher application rates such as 2.0 to 4.0g per pot in both species. The greatest leaf area, plant height, and shoot dry weight of vinca were obtained when plants were fertilized with 2.0 to 4.0 g per pot of the fertilizer, resulting in a growing medium EC of $1.0{\sim}1.7dS{\cdot}m^{-1}$ throughout the experiment. Leaf area, shoot dry weight, and chlorophyll content of salvia increased with elevated application rates. Leaf area, shoot dry weight, and chlorophyll content of salvia were the greatest when plants were fertilized with 4.0 g per pot, resulting in growing medium EC of $1.0{\sim}4.0dS{\cdot}m^{-1}$ throughout the experiment. Plant height of salvia was the greatest when plants were fertilized with 2.0 to 4.0g per pot. Concentrations of nitrogen (N), phosphorus (P), potassium (K), magnesium (Mg), and sulfur (S) in the shoots of vinca increased, while concentration of calcium (Ca) decreased with elevated application rates. Concentrations of boron (B) and manganese (Mn) in the shoots of vinca increased as the application rate decreased.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.238-243
• /
• 2010

This study was conducted to investigate effects of nutrient solution pH control agent and foliar spray of ethephon on the reduction of stem inside-cavity and improvement of flower quality in chrysanthemum 'Baekma'. Changes of pH in nutrient solution as affected by the kind of pH control agent showed more settled pattern in the plot of KOH treatment than in others. Plant growth and development such as cut flower length, leaf numbers, cut flower weight and petal number were the greatest in the plot of KOH. However, the size and area of stem cavity was large in KOH rather than $KHCO_3$. As changes in the absorbing patterns of mineral elements as affected by nutrient solution pH control agent in closed system, contents of total nitrate, phosphorus, potassium and calcium by $KHCO_3$ was absorbed into the plant less than KOH, so that it remained a lot of mineral element residues rather than KOH in closed system. Plant growth as affected by the foliar spray of ethephon showed growth retardation effect in the plot of solution diluted to 1 : 500 and growth promotion effect in the plot of solution diluted to 1 : 1,000 or 1 : 2,000. The number of petals was the best in the plot of foliar spray of ethephon solution diluted to 1 : 1,000 before flowering at 45 days showing 331 petals compared to control showing 302 petals. The size and area of stem cavity as affected the foliar spray of ethephon was smaller 1 mm and 7%, respectively, in the plot of solution diluted to 1 : 2,000 before flowering at 30 days than in control. Therefore, treating pH stabilization using KOH after floral initiation stage with the foliar spray of ethephon solution diluted to 1 : 2,000 before flowering at 30 days would help to reduce stem cavity size and improve flower quality in hydroponically grown chrysanthemum 'Baekma'.

• Korean Journal of Remote Sensing
• /
• v.17 no.1
• /
• pp.33-44
• /
• 2001

The paper presents several satellite models and satellite image decomposition methods for inaccessible area where ground control points can hardly acquired in conventional ways. First, 10 different satellite sensor models, which were extended from collinearity condition equations, were developed and then behavior of each sensor model was investigated. Secondly, satellite images were decomposed and also pseudo images were generated. The satellite sensor model extended from collinearity equations was represented by the six exterior orientation parameters in $1^{st}$, $2^{nd}$ and $3^{rd}$ order function of satellite image row. Among them, the rotational angle parameters such as $\omega$(omega) and $\Phi$(phi) correlated highly with positional parameters could be assigned to constant values. For inaccessible area, satellite images were decomposed, which means that two consecutive images were combined as one image, The combined image consists of one satellite image with ground control points and the other without ground control points. In addition, a pseudo image which is an imaginary image, was prepared from one satellite image with ground control points and the other without ground control points. In other words, the pseudo image is an arbitrary image bridging two consecutive images. For the experiments, SPOT satellite images exposed to the similar area in different pass were used. Conclusively, it was found that 10 different satellite sensor models and 5 different decomposed methods delivered different levels of accuracy. Among them, the satellite camera model with 1st order function of image row for positional orientation parameters and rotational angle parameter of kappa, and constant rotational angle parameter omega and phi provided the best 60m maximum error at check point with pseudo images arrangement.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.951-956
• /
• 2012

In this study, the effects of the use of a starter on radish soaked at $4^{\circ}C$ for 28 days using two kinds of domestic sun-dried salt (white and gray salt) were determined. As a result, the moisture contents of the radish soaked with white and gray salt were 7.93 and 4.50%, respectively. The salinity levels were found to be equal (90%). No significant difference was found between the two groups in terms of the mineral contents of the salts therein ($37812.41{\pm}1922.95$ and $39755.13{\pm}1205.70$ mg/100 g, respectively). However, iron and zinc contents of gray salt were higher than those of white salt while the calcium, potassium, and magnesium contents were lower than those of white salt. After the addition of the starter, the sugar content increased, the pH decreased, and the total acidity rapidly decreased compared with the non-starter group during fermentation. The total microorganism count of the two groups increased during the fermentation period of 28 days. From the initial fermentation for 7 days, the lactic acid bacteria in the non-starter group increased while those in the leuconostoc starter group steadily increased within the whole fermentation period. The Leuconostoc spp. in non-starter group increased, but that in the starter group decreased to pH 4.0 on day 14.

• Food Science and Preservation
• /
• v.25 no.1
• /
• pp.136-144
• /
• 2018

This study aimed to provide basic evidence regarding the development of materials by analyzing the physicochemical properties and antioxidant activities of Streptococcus thermophilus KCCM 3782 strain-fermented Cordyceps militaris grown on Tenebrio molitor. Among the solvents tested, DPPH radical scavenging activity was the highest in the hot water-extracted sample after 30 min of extraction. Moisture content decreased, whereas crude protein and fat content increased, after lactic acid bacteria-mediated fermentation. Sodium, magnesium, calcium, and zinc contents increased, with potassium levels attaining the maximum value, whereas free amino acid content decreased after the fermentation. Among Hunter's color values, a value increased to $66.7{\rightarrow}149.92$ after fermentation, whereas the L and b values decreased to $15.79{\rightarrow}-15.75$ and $54.45{\rightarrow}0.01$, respectively. Cordycepin content assay increased from 7.02 mg% to 8.66 mg%. The DPPH free radical scavenging activity of the fermented product was 91.92 EDA%, which was higher than that of the extract (84.69 EDA%). The ABTS free radical scavenging and superoxide dismutase (SOD) activities were also higher in the fermented products.

• Korean Journal of Plant Resources
• /
• v.31 no.4
• /
• pp.283-293
• /
• 2018

This study was performed to analysis of chemical constituent in Polygonum multiflorum root (PMR) by different dry methods (hot-air dry, shade dry, and freeze dry). The results are summarized as followings; major free sugar were detected fructose, glucose, and sucrose in dried PMR based on various dry methods. The highest content of free sugars was found in freeze dried PMR. The four organic acids were detected in dried PMR by HPLC analysis. The content of oxalic acid in shade dried PMR was higher than the dried PMR by different dry methods. The content of total amino acid and essential amino acids were high in the orders of freeze drying > shade drying > hot-air drying. The potassium and magnesium levels of freeze dried PMR was significantly higher than the other drying method of PMR. Whereas the calcium and sodium levels were higher in hot-air dried PMR. The major fatty acids were determined the linoleic acid in PMR by different dry methods.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.4
• /
• pp.189-194
• /
• 1975

On a newly reclaimed acidic soil, investigation was made to find out the influence of lime and P application at a largeg uantity on the uptake of Zn by corn and its distribution among the leaves, under afactorial combination with two levels of Zn, lime, and P. The results are summarized as following. 1. The application of lime for neutralization of soil significantly reduced the uptake of Zn by corn. 2. Liberal doses of P (5% of P absorption coefficient of soil; 500ppm) applied before sowing did not influence the uptake of Zn. 3. The concentration of Zn in bottom leaves better reflected the Zn uptake status of corn than the upper leaves. The concentration of Zn in bottom leaves responded clearly to the treatments of lime and Zn, while those of upper leaves tended to be constant unresponding to application of lime and Zn. 4. On the present experimental condition, the yield of corn was increased with the increase of P application. But the concentration of P in plant tissue remained constant under different P levels. 5. Application of lime (calcium hydroxide) on low P plots, depressed the yield of corn significantly. It was speculated that the lime applied at large dose made the applied P less available to corn.