• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.84-87
• /
• 2000

The microwave dielectric properties of complex perovskite-structured $Ba(Mg_{1/3}Ta_{2/3})O_3$ ceramics were investigated with calcining condition. The BMT ceramics were prepared by conventional mixed oxide method. Calcining conditions were $1200^{\circ}C$ for 10hr., $1300^{\circ}C$ for 2hr., and 5hr., respectively. And the specimens were sintered at $1650{\mu}m$. The structural and microwave properties of BMT ceramics were investigated by XRD, SEM and network analyzer. In the case of BMT ceramics calcined at $1300^{\circ}C$ for 5 hr., dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.26, 31,144(at 1GHz), 6.11[ppm/$^{\circ}C$], respectively.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1570-1576
• /
• 1994

Effect of Na2O/SiO2 molar ratio, calcining temperature and addition of NaCl were investigated on the hydrothermal formation of X-type zeolite from the natural mordenite, which is a kind of rock deposited abundantly in kuryong po. Pulverized mordenite was first mixed with NaOH or NaOH-NaCl solution, and crystallized under hydrothermal condition at 90~10$0^{\circ}C$ for 10 hrs. Optimum condition for synthesis of the X-type zeolite were \circled1 the ratio Na2O/SiO2, NaCl/Al2O3 and H2O/Na2O:0.68, 11.4 and 40, respectively, \circled2 calcining temperature of starting materials: 90$0^{\circ}C$, \circled3 aging time: 48 hrs. and \circled4 crystallization temperature: 10$0^{\circ}C$. The yield of X-type zeolite under the optimum condition was about 55~60%, and the major crystallized X-type zeolite was faujasite phase. Zeolite of then type X was crystallized when NaCl was added to treating solution with in the limit 14.25 of NaCl/Al2O3 molar ratio. As the calcination temperature (from 50$0^{\circ}C$ to 95$0^{\circ}C$) of starting materials increases, yield of zeolite x increase.

• 한국세라믹학회지
• /
• 제17권3호
• /
• pp.121-128
• /
• 1980

In order to obtain the fundamental data for the preparation of ferroxplana $Zn_2Y(Ba_2Zn_2Fe_{12}O_{22})$, which is useful for GHz-band communication, the optimum coprecipitation condition of $Zn(NO_3)_2-6FeCl_3$ in $NH_4OH$ solution and the formation process of the hexagonal ferrite were investigated. By the hot-petroleum-drying and calcining the coprecipitated hydroxide mixture $Zn(OH)_2 +Ba(OH)_2+ 6Fe(OH)_3$, the fine and uniform powder was obtained , whose phase composition and microstructure were studied by X.R.D. and electron microscope. In results, it was found that $Zn_2Y$, BaM and $Zn_2W$ were the representative phases in calcined specimens whose activation energies of crystal growth were about 3, 8, 2.5, $5.4{\times}10^4$ J/mole , respectively. The sintered specimens would be appreciated as useful magnetic cores for the high frequency communication.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.31-35
• /
• 1990

In the ($Bi_{1-x}Pb_{x}$)$_2$$Sr_2$$Ca_2$$Cu_{3.6}$$O_{y}$ (x=0∼0.5) superconductors, DTA and XRD-pattern analyses were performed to obviousely define optimal calcining and sintering temperature. And, understanding behaviors of High-Tc phase with preparation condition of superconductors, that is, calcining and sintering temperature, sintering time, and variation of Pb contents, in order to make single phase of superconductor, microstructure and its composition were analyzed with SEM, XRD, and EDAX. continuously, the cause of phase transition was define with synthetically studying mutural relation between measured electrical resistivity and current density. Also, in order to design enhancement of critical current density, Jc required for realization, samples varied with pressing condition were made, and measured its, Jc.

• 한국수산과학회지
• /
• 제34권5호
• /
• pp.483-487
• /
• 2001

갑오징어 가공 부산물인 갑으로부터 유용 칼슘을 효율적으로 추출하기 위하여 소성처리 ($800^{\circ}C$, 2시간), 고온가압처리 ($121^{\circ}C$, 10시간) 및 초음파처리 ($60^{\circ}C$, 10시간)와 같은 전처리 방법에 대하여 검토하였다 소성처리에 의한 칼슘 추출 분말의 경우 백색이었으나, 기타 추출법으로 처리되어진 칼슘 분말의 경우 연노랑색을 나타내었다 소성처리에 의한 갑 분말의 칼슘함량은 $70.5\%$로 원료 및 다른 전처리 방법에 비하여 약 2배정도 증가하였다 전 처리 방법에 따른 칼슘의 가용화율은 원료에 비하여 초음파처리 및 고온가압처리의 경우 약간 감소하였으나, 소성처리한 경우 약 22배가 증가하였다. 이상의 칼슘제로서 가장 중요한 품질지표인색조, 칼슘 가용화율 및 순도 둥으로 미루어 보아 전처리 방법으로는 소성처리가 가장 우수하였다. 소성처리 시료를 RED 상분석한 결과 주성분은 산화칼슘이었다. 그러나, 소성처리에 의한 칼슘 추출 분말의 경우 pH가 12.9로 강알칼리를 나타내어 안전성 측면에서 식품품질 개선제 둥으로 사용하기에는 다소 문제가 있었다. 이상의 결과로 미루어 보아 갑오징어갑으로부터 칼슘을 추출하는 방법으로는 소성처리가 가장 우수하였으나, 강알칼리로 인해 식품 품질개선제 등과 같이 효율적으로 이용하기 위하여는 반드시 중성부근의 pH로 조정이 이루어져야 하리라 판단되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.198-198
• /
• 2006

SnO2가 첨가된 In2O3(ITO) sputtering 타켓은 넓은 파장영역에서의 투광성과 높은 전기전도도의 특성 때문에 여러 종류의 평판형 디스플레이 제품에 사용되고 있다. 사용된 In2O3와 SnO2 분말은 높은 순도의 금속을 사용하였으며, 공질법을 이용하여 분말을 제조하였으며, 혼합된 In2O3-SnO2 분말은 하소조건과 소결조건에 따라 특성을 평가 하였다. 본 연구의 목적인 ITO sprttering 타켓의 SnO2 분산조건은 하소 온도가 증가함에 따라 분산성이 뛰어났으며, 조사된 30wt% 에서 5wt%로 SnO2의 함량이 감소함에 따라 분산성은 향상되었다. 이러한 결과들로부터 ITO 타켓 밀도와 SnO2의 분산성은 1150C 이상에서 휘발하는 SnO2의 량에 의해 크게 영향을 받는다.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1403-1409
• /
• 2018

In the present study, the $SrMoO_4:Eu^{3+}$ phosphors has been synthesized through hydro-thermal co-precipitation method, and single factor and orthogonal experiment method was adopted to find optimal synthesis condition. It is interesting to note that hydro-thermal temperature is a prominent effect on the luminescent intensity of $SrMoO_4:Eu^{3+}$ red phosphor, followed by co-precipitation temperature, calcining time, and the doping amount of $Eu^{3+}$. The optimal synthesis conditions were obtained: hydro-thermal temperature is $145^{\circ}C$, co-precipitation temperature is $35^{\circ}C$, the calcining time is 2.5 h, and the doping amount of activator $Eu^{3+}$ is 25%. Subsequently, the crystalline particle size, phase composition and morphology of the synthesized phosphors were evaluated by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The results show that these phosphors possess a scheelite-type tetragonal structure, and the particle size is about $0.2{\mu}m$. Spectroscopic investigations of the synthesized phosphors are carried out with the help of photo-luminescence excitation and emission analysis. The studies reveal that $SrMoO_4:Eu^{3+}$ phosphor efficiently convert radiation of 394 nm-592 and 616 nm for red light, and the luminescence intensity of $SrMoO_4:Eu^{3+}$ phosphors is improved. $SrMoO_4:Eu^{3+}$ phosphors may be a potential application for enhancing the efficiency of white LEDs.

• 한국세라믹학회지
• /
• 제16권2호
• /
• pp.89-98
• /
• 1979

In order to prepare ferroxplana ZnY $(Ba_2Zn_2Fe_{12}O_{22})$, which would be useful for GHz-band communication, the optimum coprecipitation condition of 1 $BaCl_{2-1} Zn(NO_3)_2-6FeCl_3$ in $NaOH-Na_2CO_3$ solution was investigated by use of a new apparatus invented in our laboratory. By freeze-drying and calcining the coprecitated hydroxide-carbonate, the very reactive powder was obtained, from which the synthesis process of ZnY and the other related crystals were investigated by means of X-ray diffraction. In results, it was found that the reactive powder containing ZnY as the major component can be prepared by this method, which may be used in manufacturing the various magnetic cores for the microwave communication.

• 대한화학회지
• /
• 제8권1호
• /
• pp.5-8
• /
• 1964

In order to investigate the availability of serpentines occurring in Korea as fertilizer, the dissolving rates of Magnesia and Silicate contents in 0.5N HCl solution after heat treatment of the serpentines, have been studied. It was found that calcination of the serpentines at $700^{\circC$ for 30 min. was the best condition for utilization of serpentines as fertilizer. The weight decrease on calcining has also been discussed from the chemical point of view.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.252-255
• /
• 1999

The effect of calcination temperature(1st and 2nd calcining at 110$0^{\circ}C$ , 120$0^{\circ}C$ and 130$0^{\circ}C$ respectively) on physical properties of BMNT Ceramics ware investigated. The optimum 1st and 2nd calcination temperature were 120$0^{\circ}C$ , and sintering temperature was 155$0^{\circ}C$. In this condition, the sintering density was 7.53 [g/㎤] and the dielectric constant, Q.f$_{0}$ and $\tau$$_{r}$ were 26, 80, 300[GHz] and +1.5[ppm/$^{\circ}C$] respectively in the microwave range.e.e.