• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.229-231
• /
• 2015

In pneumatic reactor, hydrodynamic relation between gas and solid is important and particle size has a significant effect on this relation. In this reason, we analyzed drying and calcine process with a corrected model by considering the effect of the particle size distribution(PSD) with different seven particle groups by particle size.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.2
• /
• pp.63-68
• /
• 2008

Traditionally and generally used calcined clay was carburized, and its characteristics were studied. Carburization treatment was performed by the thermally decomposed carbon and the deposit carbon which occur in a so called 'Boudouard reaction $(2CO{\rightarrow}CO_2+C)'$ at fuel combustion process in a closed-type furnace. The color of the carburized calcine clay changed from yellow to black, and the carbon component revealed as crystalline graphite by the X-ray diffraction test. The weight of the carburized calcine clay decreased to about 4 wt.% by the 1st heating to $1400^{\circ}C$ in air but it does not decreased by the 2nd heating of the same conditions. By the carburization treatment, the water absorption changed from 13 wt.% to 6 wt.%, and the contact angle for water drop changed, too, from 0 to $87^{\circ}$ which was tested by the photograph of one minute after a water drop contact. It means the carburized calcine clay does not absorb water drop so it has a hydrophobic characteristic.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1347-1351
• /
• 2004

The ZnGa$_2$O$_4$ phosphor target was synthesized through solid-state reactions as calcine and sintering temperature in order to deposit ZnGa$_2$O$_4$ Phosphor thin film by rf magnetron sputtering system. The x-ray diffraction patterns of ZnGa$_2$O$_4$ phosphor target showed the position of (311) main peak. The cathodoluminescence(CL) spectrums of ZnGa$_2$O$_4$ phosphor target showed main peak of 370 nm to 400 nm, and maximum intensity at the calcine temperature of $700^{\circ}C$ and sintering temperature of 130$0^{\circ}C$. It was possible to prepare The ZnGa$_2$O$_4$ phosphor thin film with synthesized ZnGa$_2$O$_4$ phosphor target and The prepared ZnGa$_2$O$_4$ phosphor thin film showed the position of (311) main peak.

• Journal of the Korean Ceramic Society
• /
• v.18 no.3
• /
• pp.171-181
• /
• 1981

Alkaline-earth porcelains have been prepared from mixture of kaolin, quartz, and synthetic calcines obtained by calcining a mixture of kaolin and more than two different kinds of alkaline-earth carbonates. They were magnesium, calcium and barium carbonates which are inexpensive and readily available. The vitrification behavior of the batch mixes was investigated in the firing range of 1240$^{\circ}$to 1380$^{\circ}$, in relation to the body compositions. It appeared that the density and the firing temperature depended largely on the content of alkaline-earth oxides in the body. These porcelains posses excellant dielectric properties, and are especially valuable as bases for deposited carbon resistors for which they were developed. An illustrative composition is 50% Dong Hwa kaolin, 22.4% Chang Shin quartz, 27.6% calcine. The composition of the calcine is 70% Dong Hwa kaolin, 10.7% BaCO3, 13.5% CaCO3, 5.8% MgCO3. The specific resistance of this body is $1.2{\times}10^{15}$ ohm-cm at 5$0^{\circ}C$, $2.5{\times}10^{14}$ ohm-cm 10$0^{\circ}C$, $2.5{\times}10^{13}$ ohm-cm at 15$0^{\circ}C$, $1.8{\times}10^{12}$ohm-cm at 20$0^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.576-580
• /
• 2017

In the present paper, the thermal deactivation characteristics of plate-type commercial $V_2O_5-WO_3/TiO_2$ SCR catalyst were investigated. For this purpose, the plate-type catalyst was calcined at different temperatures ranging from $500^{\circ}C$ to $800^{\circ}C$ for 3 hours. Structural and morphological changes were characterized byXRD, specific surface area, porosity, SEM-EDS and also NOx conversion with ammonia according to the calcine temperature. The NOx conversion decreased with increasing calcine temperature, especially when the catalysts were calcined at temperatures above $700^{\circ}C$. This is because the crystal phase of $TiO_2$ changed from anatase to rutile, and the $TiO_2$ grain growth and $CaWO_4$ crystal phase were formed, which reduced the specific surface area and pore volume. In addition, $V_2O_5$, which is a catalytically active material, was sublimated or vaporized over $700^{\circ}C$, and a metal mesh used as a support of the catalyst occurred intergranular corrosion and oxidation due to the formation of Cr carbide.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.41-45
• /
• 2004

A dust injection system was developed for the lime calcining rotary kiln for the coke dust from the coke dry quenching(CDQ) facility to be used as a fuel. The CDQ dust was injected with the gaseous fuel through the hole in the burner. In order to prevent the spot heating large particles should be removed from dust and dust should be injected as fast as possible so that particle combustion lasts as long as possible without precipitation. This is especially necessary when dust is burned together with gaseous fuel because the gaseous fuel can not go so far and in addition dust combustion aggravates hot spot heating. In this research a rotation drum screen was used to remove particles with diameter larger than 4mm and dust injection speed was 40m/sec. And the burner was adjusted not to use swirl that hinders flame go far away. With these measures scale generation iside the kiln could be reduced to be negligible and in addition NOx emission could be reduced from 150ppm to 20ppm. The fuel reduction was about 85Mcal/T-lime.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.150-158
• /
• 2005

Added ratio of 8YSZ powder and organic compounds (solvent, plasticizer, dispersant, binder) properly. It manufactured electrolysis membrane by wet process that make slurry and dry process that do not use organic compounds. In the case of wet process, harmony combination and method of organic compound are an importance element in slurry manufacture. This slurry did calcine at temperature of 140$^{\circ}C$ in Furnace and manufactured electrolyte disk by Dry pressing method. Like this, manufacturing disk sintered at temperature of $1300^{\circ}C,\;1400^{\circ},\;1500^{\circ}C$ in Furnace and completed electrolysis membrane. Confirmed change of crystal structure and decision form through analysis of density, SEM, XRD according to change of sintering temperature, and considered relation with ion conductivity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.539-542
• /
• 2004

The $ZnGa_2O_4$ phosphor target is synthesized through solid-state reactions at the calcine temperature of $700^{\circ}C$ and sintering temperature of $1300^{\circ}C$ in order to deposit $ZnGa_2O_4$ phosphor thin film by rf magnetron sputtering system. The $ZnGa_2O_4$ phosphor thin film is deposited on Si(100) substrate and prepared $ZnGa_2O_4$ phosphor thin film is annealed by rapid thermal processor(RTP) at $700^{\circ}C$, 15sec. The x-ray diffraction patterns of $ZnGa_2O_4$ phosphor target and thin film show the position of (311) main peak. The cathodoluminescenre(CL) spectrums of $ZnGa_2O_4$ phosphor thin film show main peak of 420nm and maximum intensity at the substrate temperature of $500^{\circ}C$ and annealing temperature of $700^{\circ}C$ 15sec.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1092-1095
• /
• 2004

The $ZnGa_2O_4$ phosphor target is synthesized through solid-state reactions as calcine and sintering temperature in order to deposit $ZnGa_2O_4$ phosphor thin film by rf magnetron sputtering system. The $ZnGa_2O_4$ phosphor thin film is deposited on $Pt/Ti/SiO_2/Si$ substrate and prepared $ZnGa_2O_4$ Phosphor thin film is annealed by rapid thermal processor(RTP) at $750^{\circ}C$, 10 sec. The x-ray diffraction patterns of $ZnGa_2O_4$ phosphor target and thin film show the position of (311) main peak. The cathodolumincsccnce(CL) succtrums of $ZnGa_2O_4$ phosphor target show main peak of 360nm and broad bandwidth of about 180nm.

• Journal of the Korean Chemical Society
• /
• v.40 no.10
• /
• pp.656-662
• /
• 1996

Using low temperature and atmospheric pressure method, we synthesized Na, TPA-ZSM-5 with Si/Al ratio of about 100. We employed 27Al and 29Si MAS NMR spectroscopy and FT-IR to investigate the crystallization process as a function of time. The chemical shift depends on the initial composition of reactants and changes during the course of synthesis different from those reported by others earlier. However, the chemical shift of our final product showed in the range of typical ZSM-5. And the defect site was removed by the calcine. From XRD and SEM data, the formation of ZSM-5 was also confirmed.