• Journal of Korean Foot and Ankle Society
• /
• v.20 no.4
• /
• pp.163-169
• /
• 2016

Purpose: To investigate the measured values of the talus in Koreans. Materials and Methods: We measured 88 tali from 44 cadavers that have been donated between December 2012 and December 2015. Of the cadavers, 27 were male and 17 were female. Their mean age was 73 years. The length and width of the talus were measured using a digital goniometer and vernier caliper. Results: The values of cadaveric measurement, mean maximal width and length, width and length of the dome anterior, width and length of the posterior facet, height and length of the trochlear medial facet, and height and length of the trochlear lateral facet were $43.6{\pm}2.6mm$, $56.5{\pm}3.3mm$, $32.5{\pm}2.0mm$, $42.2{\pm}2.7mm$, $22.2{\pm}2.2mm$, $34.7{\pm}2.0mm$, $15.3{\pm}1.3mm$, $33.3{\pm}2.9mm$, $25.3{\pm}3.3mm$, and $30.8{\pm}2.4mm$ for men and $38.9{\pm}1.6mm$, $53.6{\pm}2.4mm$, $27.9{\pm}2.1mm$, $37.4{\pm}3.2mm$, $20.6{\pm}0.8mm$, $31.9{\pm}1.2mm$, $13.6{\pm}2.6mm$, $28.4{\pm}2.5mm$, $24.9{\pm}2.1mm$, and $28.9{\pm}1.4mm$ for women, respectively. The size of the talus showed an accuracy of 86% when anteroposterior diameter was greater than 59 mm. A difference in the size of the right and left talus was not observed. The mean inclination and declination angles were $24.4^{\circ}{\pm}4.2^{\circ}$ and $28.2^{\circ}{\pm}5.4^{\circ}$ for men, and $24.6^{\circ}{\pm}3.6^{\circ}$ and $24.7^{\circ}{\pm}6.7^{\circ}$ for women (p=0.980, p=0.018), respectively, at least $15^{\circ}$, which showed a big difference for every object up to $37^{\circ}$. Conclusion: This paper, to the best of our knowledge, is the first study to measure the talus in Koreans. There were differences by gender and ethnicity in the in measured talus values. The measurements were smaller than European-Americans and greater than Japanese.

• Journal of Chest Surgery
• /
• v.36 no.3
• /
• pp.182-188
• /
• 2003

Background: Although ramicotomy (division of the rami communicantes of the thoracic sympathetic ganglia) is a selective and physiological surgical method for essential hyperhidrosis, it has some problems such as higher recurrence rates and the different surgical results among the patients and between left and right sides in the same individual. As one of the factors that are related to the differences in surgical result and recurrences, we investigated the anatomical variations of the rami communicantes. The purpose of this study is to help develop new surgical methods to decrease surgical differences among the patients or between the left and right sides of the same individual and recurrence rates in the clinical application of ramicotomy. Material and Method: We dissected 118 thoracic sympathetic chains in 59 adult Korean cadavers (male: 33, female: 26) to examine the anatomical variations of the rami communicantes from the second to the fourth thoracic sympathetic ganglia that have major components innervating to the hands. After the dissection of bilateral thoracic sympathetic chains, we compared the anatomy of left and right sides and examined the anatomical variations of rami communicantes. Result: The number and variation of communicating rami connecting the spinal nerves and the second sympathetic thoracic ganglion were much larger than lower levels. There was considerably less variability in the anatomy of the rami communicantes at successive levels. Among the 59 cadavers dissected, only 14.3% (9/59) had similar anatomy of thoracic sympathetic chains at both sides. As the components related to the essential palmar hyperhidrosis, intrathoracic nerve of Kuntz from the second thoracic sympathetic ganglion to the first intercostal nerve or brachial plexus were observed in 55.9% (66/118). The incidence of descending rami communicates from the second thoracic sympathetic ganglion to the third intercostal nerve and from the third thoracic sympathetic ganglion to the fourth intercostal nerve were 49.2% (58/118) and 28.0% (33/118). And the incidence of ascending rami communicates from the third thoracic sympathetic ganglion to the second intercostal nerve and from the fourth thoracic sympathetic ganglion to the third intercostal nerve were 6.8% (8/118) and 3.4% (4/118), respectively. Conclusion: Based on the various anatomical evidences of the rami communicantes from this study, only the ramicotomy at the third sympathetic ganglion level is insufficient for the treatment of the essential palmar hyperhidrosis to decrease the difference of surgical results and recurrences. When one is planning to perform the ramicotomy for the essential palmar hyperhidrosis, it is advantageous to divide the intrathoracic nerve of Kuntz on the second rib and the descending or ascending rami communicantes on the third and the fourth ribs as well as all the communicating rami from the third sympathetic ganglion.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.404-409
• /
• 2012

In order to obtain optimum mixing conditions with animal cadaver residue and sawdust for composting using rendering treatment method for agricultural recycling, changes of chemical characteristics and compost quality after composting were investigated. Initial mixing ratios with animal cadaver residue and sawdust were adjusted 100 : 0, 50 : 50 and 30 : 70. Temperature, pH, contents of ammonia and carbon dioxide were rapidly increased in 3 days and then decreased with time. Organic matter content was similar in all conditions. In mixing ratio of 50 : 50, the compost quality was satisfied with compost depending on official standard for product fertilizer. Thus, the optimum mixing ratio of animal cadaver residue and sawdust were 50 : 50.

• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.67-70
• /
• 2009

Purpose: Anatomical basis around orbit can be helpful in periorbital surgery, and there are many articles about measurement between periorbital reference points. In 1967, Jones and Evans measured the orbital wall thickness of Asian cadavers and this article has been cited more than 50 times. But there is no research in orbital thickness in Vivo. Author's idea was based on difference between live human and human cadaver. Material & Method: We conducted this study from 63 consecutive blow out fracture patients between January, 2000 to june, 2005 by collecting the bone fragments and measured the thickness of that fragment using vernia calipers. Anatomically, orbital floor is separated two area by inferior orbital fissure and we measured each area. Three areas were zone I (medial wall), zone II (medial to inferior orbital fissure) and zone III (lateral to inferior orbital fissure). Result: When the overall results were considered, the thickness of Zone I (medial wall of orbit) was average $0.131{\pm}0.006mm$ in male and $0.129{\pm}0.007mm$ in female and Zone II (medial side of orbital floor) was $0.251{\pm}0.005mm$ in male and $0.245{\pm}0.006mm$ in female, Zone III (lateral side of orbital floor) was $0.237{\pm}0.006mm$ in male and $0.226{\pm}0.006mm$ in female. There were no statistical difference between orbital wall thickness of male and female. Also, orbital wall thickness of adults measured $0.130{\pm}0.005mm$, $0.250{\pm}0.005mm$, $0.232{\pm}0.006mm$ in Zone I, Zone II, Zone III and $0.128{\pm}0.006mm$, $0.233{\pm}0.005mm$, $0.215{\pm}0.007mm$ in Zone I, Zone II, Zone III from childs, and there were no statistical difference between adult and child. Conclusion: This article is the first study about Korean orbital wall thickness, and can be helpful to periocular surgery.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.535-546
• /
• 2010

Purpose: The subcutaneous fat tissue is separated into 2 layers by the subcutaneous fascia: the superficial and deep fat layers. The two fat layers have different structures according to the body regions. The purpose of this study is to evaluate the distribution and pattern of the two fat layers in the human body by computed tomography (CT) and histological analysis according to age, sex, anatomical region, and body mass index (BMI). Methods: This study included 200 males and 200 females who underwent 64-channel dynamic CT in our hospital. The patients were divided into 5 groups according to 10 years of their ages separately in either male or female gender. The thickness of the superficial and deep fat layers was measured in the abdominal, pelvic, and femoral regions, and we analyzed the values. Statistical analyses were performed using SPSS software. The $3{\times}3$-cm whole fat layers were harvested from the same sites of 3 cadavers for histological examination, and one cadaver was dissected for gross evaluation. Results: The total thickness of subcutaneous fat tissue was greater in females than in males, and the ratio of the superficial fat layer to the whole fat layer was higher in females. The superficial fat layer became thinner with increasing age in males. As BMI increased, the total fat layer became thicker, and the superficial fat layer became thicker than the deep fat layer. On histological examination, the superficial fat layer had small adipose lobules and showed a densely distributed pattern in the abdominal region, whereas in the femoral region, it had large adipose lobules and showed a sparsely distributed pattern. There were no significant differences in the histological findings of the deep fat layer between the 3 body regions. Conclusion: Significant differences in histological findings of the two fat layers were found in relation to age, sex, anatomical region, and BMI. The superficial fat layer became thinner with increasing age in males, but it was constant in females. As BMI increased, the total thickness of subcutaneous fat tissue became greater, and the superficial fat layer became thicker than the deep fat layer. Our measurements can be used to understand the characteristics of the fat layers in relation to age, sex, anatomical region, and BMI.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.122-128
• /
• 2010

Purpose: Many descriptions of the digital arterial anatomy including skin territory of the finger have been published. Relatively few studies on venous architecture of the finger have been performed in this area, in part, attributable to the technical difficulties encountered in dissecting small vessels. The purpose of this study is to present the precise microsurgical anatomy of the vein related to the digital artery and venae comitantes of the components. Methods: Arterial and venous anatomy of their relation to the fingers were examined in 38 specimens of two fresh cadavers and 36 clinical cases. All specimens were evaluated grossly, surgical microscopically, or / and light microscopically to observe the three & two-dimensional structure of the artery and joining vein, evidence of the venae comitantes, and venous valve. Results: No longitudinal venae comitantes along the digital artery were found in any specimens. The size of the venae comitantes of each digital artery was much smaller than other vein, but always existed any level of digital artery. One or two venae comitantes in the digital artery ran spiral, oblique, helical, fibrillar, or irregular branched shape. The authors also found the vein of the finger, that had bicuspid valves, but not in venae comitantes. Conclusion: Recently, venous outflow problem rather than arterial circulation is the most common cause tissue failure after microvascular surgery in the hand. Sometimes, if it is not recognized early, there is an increased risk of tissue damage and loss. The authors concluded that this study presents a useful knowledge for the characterization of the venous structure and evidence for venae comitantes like a venule in the digital artery at varying levels of the finger.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.585-592
• /
• 2015

The objective of this study is to determine if when chymopapain is loaded onto a nano-carrier, an injection of it reduces the spreading range of the drug within the discs. The materials for the experiment, which were conducted for three weeks, included fifteen intervertebral discs taken from two cadavers, which were divided according to the types of injected chymopapain solutions as follows: ordinary chymopapain group and nano-carrier system group. The nano-carrier system group was again divided into two subgroups according to the types of pluronics, the basic material for the nano-carriers: Pluronic F 127(DA-PF 127) in the nano-carrier group and Pluronic F 68(DA-PF 68) in the nano-carrier group. The results showed that the action of chymopapain using a pluronic-based nano-carrier system was localized around the center of the injection site instead of broad spreading, compared to that of the ordinary chymopapain group (p<0.01). This characteristic suggests a possible application to effective agents for minimally invasive spinal treatment through which disc lesions were removed selectively.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.836-844
• /
• 2011

Purpose: Hands are the chief organs for physically manipulating the environment, using anywhere from the roughest motor skills to the finest, and since the fingertips contain some of the densest areas of nerve endings on the human body, they are continuously used organ with complex functions, and therefore, often gets injured. To prevent any functional loss, a detailed anatomical knowledge is required to have a perfect surgical treatment. Also it is necessary to have a thorough understanding of arrangements of the human extensor tendons and intertendinous connections when tenoplasty or tendon transfer is required. We performed a study of the arrangements of the human extensor tendons and the configuration of the intertendinous connections over the dorsum of the wrist and hand. Methods: A total of 58 hands from Korean cadavers were dissected. The arrangements of extensor indicis proprius, extensor digitorum communis, and extensor digiti minimi tendons and intertendinous connections were studied. Results: The most common distribution patterns of the extensor tendons of the fingers were as follows: a single extensor indicis proprius (EIP) tendon which inserted ulnar to the extensor digitorum-index (EDC-index); a single EDC-index; a single EDC-middle; a double EDC-ring; an absent EDC-little; a double extensor digiti minimi (EDM), a single EDC-index (98.3%), a single EDC-middle (62%), a double EDC-ring (50%), and an absent (65.5%) or a single (32.8%) EDC-little. A double (70.6%) EDM tendons were seen. Intertendinous connections were classified into 3 types: type 1 with thin filamentous type, type 2 with a thick filamentous type, and type 3 with a tendinous type subdivided to r shaped 3r type and y shaped 3y type. The most common patterns were type 1 in the 2nd intermetacarpal space, type 2 in the 3rd intermetacarpal space, and type 3r in the 4th intermetacarpal space. And in the present study, we observed one case of the extensor digitorum brevis manus (EDBM) on the boht side. Conclusion: A knowledge of both the usual and possible variations of the extensor tendon and the intertendinous connection is useful in the identification and repair of these structures.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.459-465
• /
• 2011

It has been reported that the femoral morphology has a major correlation to femoral neck fractures(FNF). Previous studies to analyze these correlations have relied on mechanical testing and finite element methods. However, these methods have not been widely applied to various femur samples and models. It is because of the availability of the samples from both patients and cadavers, and also of the geometric limitations in changing the shape of the models. In this study we analyzed femoral neck fractures using a parameterized femoral model that could provide flexibility in changing the geometry of the model for the wide applications of FNF analysis. With the parameterization a variety of models could be generated by changing four major dimensions: femoral head diameter(FHD), femoral neck diameter(FND), femoral neck length(FNL), and neck-shaft angle(NSA). We have performed FEA on the models to compute the stress distributions and reaction forces, and compare them with the data previously generated from mechanical testing. The analysis results indicate that the FND is significantly related with the FNF and the FHD is not significantly related with the FNF.

• Clinics in Shoulder and Elbow
• /
• v.15 no.2
• /
• pp.73-78
• /
• 2012

Purpose: Understanding exactly detailed anatomy and morphology of scapula is very important for further surgical procedures. This study was intended to provide accurate anatomic and morphologic information of scapula by exactly measuring scapular thickness using computed tomography and reconstructing its geometric model. Materials and Methods: Eight average lengths and two angles of 102 scapular structures obtained from 51 cadavers were generally measured by computed tomography. Also, to measure the scapular thickness, sagittal planes of each scapula were divided almost equally and the thicknesses of each sagittal plane was measured by computed tomography. After measuring every thickness, average results were calculated and the gender difference was compared by Student t-test. Results: Average results of the thickness of glenoid fossa, lateral border, medial border, and the middle 1/3 portion of the scapular body were 22.4 mm, 13.83 mm, 4.44 mm and 2.06 mm, respectively. Also, male scapulars were found to be significantly thicker than female. Based on these measured thicknesses, we reconstructed the 3-dimensional geometric model of scapula. Conclusion: From these results, glenoid fossa and lateral border were the thickest part of scapula, while the middle 1/3 portion of the scapular was the thinnest.