• 제목/요약/키워드: Cadaveric study

검색결과 117건 처리시간 0.025초

소형견종의 후지정렬 측정 (Determination of Pelvic Limb Alignment in Small-breed Dogs)

  • 김주호;허수영;나지영;김남수;이기창;정성목;이해범
    • 한국임상수의학회지
    • /
    • 제32권6호
    • /
    • pp.481-485
    • /
    • 2015
  • 후지 전체의 정렬 평가에 필요한 정렬각도의 정상치를 측정하기 위하여, 정형외과적 질환이 없고 육안 또는 방사선 검사에서 각기형이 없는 것으로 판단되는 소형견 사체(말티즈, 푸들, 시추, 요크셔테리어) 의 후지 60개를 사용하였다. 각각의 후지를 완전히 신장시켜 전면 방사선 사진을 촬영하였으며, 이를 통해 기계적경골대퇴골각도(mechanical tibiofemoral angle, mTFA), 기계적중족경골각도 (mechanical metatarsotibial angle (mMTTA) 기계축-대퇴각도(mechanical axis-femur angle (MAFA), 기계축-중족각도(mechanical axis-metatarsus angle (MAMTA)을 측정하였으며, 무릎관절과 뒷발목관절의 기계축변위(mechanical axis deviation, SMAD or TMAD)의 평균값과 95% 신뢰구간 값을 전체 그리고 품종별로 측정하였다. 소형견 전체의 mTFA, MTTA, MAFA, MAMTA의 95% 신뢰구간 값은 각각 $5.7-7.4^{\circ}$, $-2.2--0.8^{\circ}$, $3.5-4.5^{\circ}$, $1.0-2.0^{\circ}$였으며, SMAD와 TMAD는 2.1-2.7%, 0.5-1.0%로 측정되었다. 본 연구에서 제시한 소형견의 후지정렬 측정법과 정상치는 소형견종의 후지 각기형의 진단 및 평가, 수술 계획에 있어 유용하게 사용될 수 있을 것이라 사료된다.

가축 전염병 발생에 따른 소와 닭 사체의 화학적 처리 방법의 적용 (Application of chemical treatment for cattle and chicken carcasses for the control of livestock infectious diseases)

  • 이택근;오연수;고영승;배다윤;탁동섭;임채광;조호성
    • 한국동물위생학회지
    • /
    • 제45권2호
    • /
    • pp.117-124
    • /
    • 2022
  • In the event of an outbreak of a livestock epidemic, it has been considered that the existing burial-centered carcass disposal method should be improved ecofriendly for prevention of leachate and odors from burial basically in regard of pathogen inactivation. Therefore, the aim of this study is whether it was possible to treat the carcass of cattle and chickens using the chemical carcass treatment method. It was conducted to establish detailed treatment standards for the chemical treatment method of cattle and chicken carcasses based on the results of the proof of the absence of infectious diseases in cattle chickens. After inoculating cattle carcass with 10 pathogens (foot and mouth disease virus, bovine viral diarrhea virus, Mycobacterium bovis, Mycobacterium avium subsp. Paratuberculosis, Brucella abortus, Bacillus anthracis, Clostridium chauvoei, Clostridium perfringens, Escherichia coli, and Salmonella Typhimurium) and chicken carcasses with low pathogenic avian influenza virus, Clostridium perfringens type C, E. coli and Salmonella Typhimurium, these were treated at 90℃ for 5 hours in a potassium hydroxide liquid solution corresponding to 15% of the body weight. This method liquefies all cadaveric components and inactivates all inoculated pathogens by PCR and culture. Based on these results, it was possible to prove that chemical treatment of cattle and chicken carcasses is effective in killing pathogens and is a safe method without the risk of disease transmission. The chemical treatment method of livestock carcasses can be suggested as an alternative to the current domestic burial-centered livestock carcass treatment method, preventing environmental pollution, and contributing to public health.

A Computed Tomography-Based Anatomic Comparison of Three Different Types of C7 Posterior Fixation Techniques : Pedicle, Intralaminar, and Lateral Mass Screws

  • Jang, Woo-Young;Kim, Il-Sup;Lee, Ho-Jin;Sung, Jae-Hoon;Lee, Sang-Won;Hong, Jae-Taek
    • Journal of Korean Neurosurgical Society
    • /
    • 제50권3호
    • /
    • pp.166-172
    • /
    • 2011
  • Objective : The intralaminar screw (ILS) fixation technique offers an alternative to pedicle screw (PS) and lateral mass screw (LMS) fixation in the C7 spine. Although cadaveric studies have described the anatomy of the pedicles, laminae, and lateral masses at C7, 3-dimensional computed tomography (CT) imaging is the modality of choice for pre-surgical planning. In this study, the goal was to determine the anatomical parameter and optimal screw trajectory for ILS placement at C7, and to compare this information to PS and LMS placement in the C7 spine as determined by CT evaluation. Methods : A total of 120 patients (60 men and 60 women) with an average age of $51.7{\pm}13.6$ years were selected by retrospective review of a trauma registry database over a 2-year period. Patients were included in the study if they were older than 15 years of age, had standardized axial bone-window CT imaging at C7, and had no evidence of spinal trauma. For each lamina and pedicle, width (outer cortical and inner cancellous), maximal screw length, and optimal screw trajectory were measured, and the maximal screw length of the lateral mass were measured using m-view 5.4 software. Statistical analysis was performed using Student's t-test. Results : At C7, the maximal PS length was significantly greater than the ILS and LMS length (PS, $33.9{\pm}3.1$ mm; ILS, $30.8{\pm}3.1$ mm; LMS, $10.6{\pm}1.3$; p<0.01). When the outer cortical and inner cancellous width was compared between the pedicle and lamina, the mean pedicle outer cortical width at C7 was wider than the lamina by an average of 0.6 mm (pedicle, $6.8{\pm}1.2$ mm; lamina, $6.2{\pm}1.2$ mm; p<0.01). At C7, 95.8% of the laminae measured accepted a 4.0-mm screw with a 1.0 mm of clearance, compared with 99.2% of pedicle. Of the laminae measured, 99.2% accepted a 3.5-mm screw with a 1.0 mm clearance, compared with 100% of the pedicle. When the outer cortical and inner cancellous height was compared between pedicle and lamina, the mean lamina outer cortical height at C7 was wider than the pedicle by an average of 9.9 mm (lamina, $18.6{\pm}2.0$ mm; pedicle, $8.7{\pm}1.3$ mm; p<0.01). The ideal screw trajectory at C7 was also measured ($47.8{\pm}4.8^{\circ}$ for ILS and $35.1{\pm}8.1^{\circ}$ for PS). Conclusion : Although pedicle screw fixation is the most ideal instrumentation method for C7 fixation with respect to length and cortical diameter, anatomical aspect of C7 lamina is affordable to place screw. Therefore, the C7 intralaminar screw could be an alternative fixation technique with few anatomic limitations in the cases when C7 pedicle screw fixation is not favorable. However, anatomical variations in the length and width must be considered when placing an intralaminar or pedicle screw at C7.

인체이식용 무세포 진피 제조를 위한 바이러스 불활화 공정 (Virus Inactivation Processes for the Manufacture of Human Acellular Dermal Matrix)

  • 배정은;김진영;안재형;최다미;정효선;이동혁;김인섭
    • 한국미생물·생명공학회지
    • /
    • 제38권2호
    • /
    • pp.168-176
    • /
    • 2010
  • 사체 피부에서 면역반응을 일으킬 수 있는 세포들을 제거한 무세포 진피는 다양한 의료용 소재로 사용되고 있다. Trin-butyl phospahate(TnBP)와 deoxycholic acids를 세포제거 용액으로 사용하여 피부조직 내 진피층의 3차원적 구조를 손상시키지 않고 다양한 구조 단백질 및 성분들을 유지한 상태에서 면역반응의 대상인 세포성 항원만을 선별적으로 제거한 이식용 동종 무세포 진피인 $SureDerm^{TM}$을 개발하였다. $SureDerm^{TM}$ 제조공정은 감염성 위해인자 불활화 공정으로 70% 에탄올 처리와 산화에틸렌 가스 처리 공정을 포함하고 있다. 본 연구에서는 SureDermTM 제조공정 중 70% 에탄올 소독 공정, 세포제거용액(0.1% TnBP와 2% deoxycholic acids) 처리 공정, 산화에틸렌 가스 멸균의 바이러스 불활화 효과를 검증하기 위해 국제적 가이드에 따라 5종의 바이러스 [human immunodeficiency virus type 1(HIV-1), bovine herpes virus(BHV), Bovine viral diarrhoea virus(BVDV), hepatitis A virus(HAV), porcine parvovirus(PPV)]를 생물학적 지표로 사용하였다. 피부조직에 각 생물학적 지표를 첨가한 후 불활화 공정을 실시한 다음 각 바이러스를 회수하여 정량한 후 불활화 정도를 비교하였다. 70% 에탄올 20분처리 공정에서 HIV-1, BHV, BVDV 같은 외피 바이러스는 처리 시간 2.5분 안에 불활화되었지만, HAV와 PPV 같은 비-외피 바이러스는 에탄올에 저항성을 나타내어 20분 처리 후 log 바이러스 감소인수가 각각 1.85와 1.15였다. 세포제거용액 처리 공정에서 HIV-1, BHV, BVDV는 각각 5분, 30분, 5분 안에 검출한계 이하로 불활화되었다. 산화에틸렌 가스처리에 의해 본 연구에 사용한 모든 바이러스가 검출한계 이하로 불활화되었다. 3가지 공정에서 HIV-1, BHV, BVDV, HAV, PPV에 대한 log 바이러스 감소인수 합은 각각 $\geq12.71$, $\geq18.08$, $\geq14.92$, $\geq6.57$, $\geq7.18$이었다. 이와 같은 결과에서 $SureDerm^{TM}$ 제조공정은 바이러스 안전성을 보증할 수 있는 충분한 바이러스 불활화 능력을 갖고 있는 것으로 판단된다.

골다공증이 있는 상완골 골두의 파일럿 홀 (Pilot Hole)과 흡수성 나사못의 크기에 따른 토크 (Torque)와 뽑힘 강도 (Pullout Strength) 간의 관계 (Relationship Between Insertion Torque, and Pullout Strength Depending on the Size of the Pilot Hole and Biodegradable Suture Anchor in Osteoporotic Humeral Head)

  • 천용민;이영한;김성환;박유정;김성재
    • Clinics in Shoulder and Elbow
    • /
    • 제15권1호
    • /
    • pp.8-15
    • /
    • 2012
  • 목적: 본 연구의 목적은 골다공증이 있는 회전근개 파열 환자에서 상완골 골두에 표준 크기 (5.0 mm) 보다 작은 송곳 (awl) (3.7 mm 나사못용)을 사용해서 5.0 mm 나사못을 삽입하는 것이 표준 크기의 송곳과 6.5 mm 나사못을 삽입하는 것에 비해 토크 (torque)나 뽑힘 강도(pullout strength)에서 차이가 있는지를 알아보고자 하였다. 대상 및 방법: 방부 처리된 12명, 24개의 짝지은 사체 견관절을 A군와 B군, 두 군으로 나누어 관심 부위의 골밀도를 측정한 후에 A군에서는 5.0 mm 나사못 삽입을 위해 3.7 mm 송곳 (awl)을 이용하는 경우를 A1군, 5.0 mm 나사못 삽입을 위해 5.0 mm 송곳을 이용하는 경우를 A2군으로 하였다. B군에서는 5.0 mm 송곳을 이용하여 5.0 mm 나사못을 삽입하는 경우를 B1군, 6.5 mm 나사못을 삽입하는 경우를 B2군으로 하여 나사못 삽입 시의 토크와 뽑힘 강도를 측정하였다. 결과: 골밀도는 A군과 B군 간이나 군내에 차이가 없었다. 토크는 A1군이 A2군보다 각각 20.6 $cN{\cdot}m$와 13.2 $cN{\cdot}m$로 유의한 차이를 보였고 (p<0.001), B1군과 B2군에서도 각각 12.1 $cN{\cdot}m$와 20.8 $cN{\cdot}m$로 유의한 차이를 보였다 (p<0.001). 그러나 증가된 정도의 차이는 유의하지 않았다. A1군과 A2군의 뽑힘 강도는 각각 204.2 N과 152.9 N으로 유의한 차이를 보였고 (p<0.001), B1군과 B2군에서도 149.5 N과 210.9 N으로 유의한 차이를 보였다 (p<0.001). 그러나 증가된 정도의 차이는 유의하지 않았다. 결론: 송곳 크기보다 큰 치수의 나사못을 사용하면, 같은 크기의 송곳과 나사못을 사용하는 경우 토크나 뽑힘 강도가 유의하게 증가하였다. 그러나 증가된 정도는 큰 송곳과 작은 송곳 간에 차이가 유의하지 않았다. 따라서 대결절의 footprint 내에 나사못과 나사못 사이의 거리가 충분하지 않은 경우에 5.0 mm 송곳을 이용하여 6.5 mm 나사못을 삽입하는 대신 3.7 mm 송곳을 이용하여 5.0 mm 나사못을 삽입해도 증가되는 뽑힘 강도는 차이가 없을 것으로 생각한다.

한국인 사체에서의 정상 거골의 실측 (The Measurement of Normal Talus in Korean Cadaver)

  • 하동준;곽희철;김전교;김정한;이창락;김영준;이정한;하병호;김의철
    • 대한족부족관절학회지
    • /
    • 제20권4호
    • /
    • pp.163-169
    • /
    • 2016
  • Purpose: To investigate the measured values of the talus in Koreans. Materials and Methods: We measured 88 tali from 44 cadavers that have been donated between December 2012 and December 2015. Of the cadavers, 27 were male and 17 were female. Their mean age was 73 years. The length and width of the talus were measured using a digital goniometer and vernier caliper. Results: The values of cadaveric measurement, mean maximal width and length, width and length of the dome anterior, width and length of the posterior facet, height and length of the trochlear medial facet, and height and length of the trochlear lateral facet were $43.6{\pm}2.6mm$, $56.5{\pm}3.3mm$, $32.5{\pm}2.0mm$, $42.2{\pm}2.7mm$, $22.2{\pm}2.2mm$, $34.7{\pm}2.0mm$, $15.3{\pm}1.3mm$, $33.3{\pm}2.9mm$, $25.3{\pm}3.3mm$, and $30.8{\pm}2.4mm$ for men and $38.9{\pm}1.6mm$, $53.6{\pm}2.4mm$, $27.9{\pm}2.1mm$, $37.4{\pm}3.2mm$, $20.6{\pm}0.8mm$, $31.9{\pm}1.2mm$, $13.6{\pm}2.6mm$, $28.4{\pm}2.5mm$, $24.9{\pm}2.1mm$, and $28.9{\pm}1.4mm$ for women, respectively. The size of the talus showed an accuracy of 86% when anteroposterior diameter was greater than 59 mm. A difference in the size of the right and left talus was not observed. The mean inclination and declination angles were $24.4^{\circ}{\pm}4.2^{\circ}$ and $28.2^{\circ}{\pm}5.4^{\circ}$ for men, and $24.6^{\circ}{\pm}3.6^{\circ}$ and $24.7^{\circ}{\pm}6.7^{\circ}$ for women (p=0.980, p=0.018), respectively, at least $15^{\circ}$, which showed a big difference for every object up to $37^{\circ}$. Conclusion: This paper, to the best of our knowledge, is the first study to measure the talus in Koreans. There were differences by gender and ethnicity in the in measured talus values. The measurements were smaller than European-Americans and greater than Japanese.

경추부의 후관절 나사못 고정술에서 단피질삽입법과 양피질 삽입법 간의 특성에 관한 비교 (Comparisons of Unicortical and Bicortical Lateral Mass Screws in the Cervical Spine : Safety vs Strength)

  • 박춘근;황장회;지철;이재언;성재훈;최승진;이상원;;박성찬;조경석;박춘근;강준기
    • Journal of Korean Neurosurgical Society
    • /
    • 제30권10호
    • /
    • pp.1210-1219
    • /
    • 2001
  • 서 론 : 후방 경유 경추 융합을 위한 후관절 금속판 고정술은 외상성 및 퇴행성 불안정성의 치료에 효과적인 방법이다. 후관절 금속판 고정의 안정성은 여러 가지 인자에 의해 결정된다. 이중 하나가 나사못의 삽입깊이이다. 이 방법이 처음 소개될 때에는 양피질골성 삽입이 이용되었다. 외과의사의 관심은 어떻게 안전하면서 생역학적으로 강력한 고정을 얻느냐에 있다. 목 적 : 이 연구의 목적은 사체에서 단피질성과 양피질성 나사못 삽입술을 시행한 후 안전성, pull-out 강도, 방사선학적 특성을 분석하고 나사못의 삽입에 대한 교육 훈련의 수준에 따른 영향을 평가하는데 있다. 방 법 : 평균 나이 78.9세인 21구의 사체에 대하여, Magerl의 기술을 변형하여 C3-C6(n=168)까지 3.5mm AO 나사못을 양쪽 후관절에 삽입하였다. 수술중 방사선 사진영상은 사용되지 않았다. 오른 쪽(단피질성 삽입)은 14mm 나사못(11mm의 유효 길이)을 이용하고, 왼쪽은 양피질성 삽입을 시도하였다. 각 사체는 3개의 군으로 나누어 척추 수술 수련의 수준이 다른 받은 3명의 척추 외과 의사들(전임 강사, 임상 강사, 수석 레지던트)이 수술을 시행했다. 수술 후 경추를 떼어내어 나사못의 위치를 육안적으로 확인하고 방사선학적으로 안정성과 삽입 위치 (1,2,3)를 평가하였다. 척수, 후관절, 신경근과 척추 동맥에 대한 나사못의 위치를"만족할 만한","위험한", 그리고"직접적인 손상"으로 구분하였다. material testing machine을 이용하여 모든 나사못에 대해서 Pull-out 강도를 측정하였다. 결 과 : 대다수의 나사못(92.9%)은 만족할 만한 상태였다. 전예에서 척수에 대한 위험성은 없다. 오른 편(단피질성 : 14mm) 나사못의 98.9%는"만족할 만한"에 속했다. 그리고 왼쪽 편(양피질성)의 68.1%는"만족할 만한"에 속했다. 양피질성 나사못 군에서 5.8%의 척추 동맥에 대한 직접적인 손상이 있었고 신경근의 직접적인 손상 발생율은 17.4%였다. 반면에 단피질성 나사못 군에서는 이들에 대한 직접적인 손상은 없었다. 양피질성 나사못에서 보인"직접 손상"의 거의 대부분은 외과 의사의 경험 부족으로 발생하였다. 나사못의 안정성과 삽입 위치 사이에는 특별한 관련이 없었다. 모든 나사못의 pull-out 강도는 $542.0{\pm}296.6N$였다. 단피질성에 있어서의 pull-out 강도($519.0{\pm}289.9N$)와 양피질성($565.2{\pm}306N$) 나사못에는 아무런 통계학적으로 의미있는 차이점을 발견할 수 없었다(p>0.05). 나사못 삽입위치와 pull-out 강도 사이에는 의미있는 차이가 없었다. 결 론 : 이번 연구는 경추 후관절 나사못 고정술시 단피질성과 양피질성 나사못의 안정성과 효능을 집중적으로 알아보았다. 명백한 것은 14mm의 나사못(효과적인 길이는 11mm)이 보다 긴 양피질성 나사못 보다 손상의 위험이 훨씬 낮고 거의 동등한 pull-out강도를 갖는다는 것이다. 또한, 수술시 방사선 영상을 사용할 수 없을 때, 훈련과 축적된 경험에 의해 나사못 삽입의 정확성과 안전성이 향상될 수 있다.

  • PDF