• The Journal of Advanced Prosthodontics
• /
• 제9권6호
• /
• pp.439-446
• /
• 2017

PURPOSE. To evaluate the effects of different surface treatments on the bond strength of novel CAD/CAM restorative materials to resin cement by four point bending test. MATERIALS AND METHODS. The CAD/CAM materials under investigation were e.max CAD, Mark II, Lava Ultimate, and Enamic. A total of 400 bar specimens ($4{\times}1.2{\times}12mm$) (n=10) milled from the CAD/CAM blocks underwent various pretreatments (no pretreatment (C), hydrofluoric acid (A), hydrofluoric acid + universal adhesive (Scotchbond) (AS), sandblasting (Sb), and sandblasting + universal adhesive (SbS)). The bars were luted end-to-end on the prepared surfaces with a dual curing adhesive resin cement (Variolink N, Ivoclar Vivadent) on the custom-made stainless steel mold. Ten test specimens for each treatment and material combination were performed with four point bending test method. Data were analyzed using ANOVA and Tukey's test. RESULTS. The surface treatment and type of CAD/CAM restorative material showed a significant effect on the four point bending strength (FPBS) (P<.001). For LDC, AS surface treatment showed the highest FPBS results ($100.31{\pm}10.7MPa$) and the lowest values were obtained in RNC ($23.63{\pm}9.0MPa$) for control group. SEM analyses showed that the surface topography of CAD/CAM restorative materials was modified after treatments. CONCLUSION. The surface treatment of sandblasting or HF acid etching in combination with a universal adhesive containing MDP can be suggested for the adhesive cementation of the novel CAD/CAM restorative materials.

• Journal of Nutrition and Health
• /
• 제30권8호
• /
• pp.976-986
• /
• 1997

Coronary artery disease (CAD) such as angina pectoris and myocardial infarction(MI) have been considered the major cause of death for decaddes . THeir incidence and prevalence are still increasing . Numerous studies have been done on the risk factor analysis of CAD in Western countries. Since the diet in Western countries is different from that in Korea it is difficult to assume that the Korean diet has the same effects as its western counterpeart on the development of CAD . THus the gudidelines for the Western CAD patients can no totally be applied to Koreans. This study was conducted to investigate the relationship between diet and CAD in Koreans. Subjects were comprised of patients admitted to the hospital for chest pain with poxxilbe CAD (men 129, women 65) . They were divided into the following three groups according to angiographic results ; angiogrphically normal coronary artery group (control), single vessel disease group(SVD) and multiple vessel disease group (MVD) . Intakes of dietary fatty acids and other nutrients were assessed by the semiquantitative food frequency method. Blood was also obtained from subjects for serum lipid analysis. Serum lipid profiles of men were clearly different form those of women. For men, serum choesterol levels (or LDL or LDL/HDL) seemed to be higher in the MVD group compared to the control and SVD groups, while TG level was significantly higher in the MVD group for women. Both men and women showed significantly higher caloric , fiber and vitamins C and A intakes in the MVD group than in the other two groups. Higher caloric intakes was due to higher intakes of carbohydrate and protein rather than fat intake. In terms of fatty acids intake, there were no significant differences among the three groups . Smoking seemed to have great effect on eating patterns in CAD patients. Smokers and ex-smokers showed significantly higher intakes of most nutrients including individual fatty acids that non-smokers. The results of stepwise regression showed that moderate alcohol intake decreases LDL levels and increases HDL levels and smoking seems to lowe HDL levels in CAD patients.

• 한국식품영양과학회지
• /
• 제15권4호
• /
• pp.32-39
• /
• 1986

토양에서 분리한 여러가지 곰팡이류 가운데 beta-galactosidase 생성력이 가장 좋은 Aspergillus niger CAD 1을 효소 생산 균주로 선정 하였다. 이 균주의 효소 생산 최적 배양조건은 밀기울에 0.5% 탈지 분유를 첨가한 배지를 $30{\circ}C$에서 72시간 정치배양하는 것이었다. 아세톤으로 침전시킨 조효소(crude enzyme)는 일차로 DEAE-cellulose, 2차로 Sephadex G-100 gel filtration에 의하여 1,387배로 정제되었고 이때의 수율은 6.2%이였다. 정제된 효소의 최적 온도는 $45{\circ}C$ 최적 pH는 4.5이었으며, 기질로서 ONPG와 유당에 대한 Km값은 각각 $3.57{\times}10^3M$과 $83.3{\times}10^3M$, Vmax값은 각각 33.0 unit/mg protein과 15.38unit/mg protein이었다. 활성화 에너지는 9,900cal/mol이었으며 효소활성 및 안정제로 금속이온을 필요로 하지 않았다. 50ml의 탈지유, 4.8%유당 용액, 유청용액에 효소 5ml(182 unit/ml)를 침가하여 $45^{\circ}C$에서 10시간 반응시켰을 때의 유당 분해율은 각각 65%, 70%, 78%를 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.95-96
• /
• 2008

A new voltage-driven pixel circuit using soluble-processed organic thin film transistors (OTFTs) for an active matrix organic light emitting diode (AMOLED) is proposed. The proposed circuit is composed of four switching TFTs, one driving TFT and one storage capacitor. The proposed circuit can compensate for the degradation of OLED current caused by the threshold voltage shift of the OTFT. The simulation results show that the variation of OLED current corresponding to a 3V threshold voltage shift is decreased by 30% compared to the conventional 2TlC structure.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.219-225
• /
• 2013

PURPOSE. Few studies have investigated the marginal accuracy of 3-unit zirconia fixed partial dentures (FPDs) fabricated by computer-aided design/computer-aided manufacturing (CAD/CAM) system. The purpose of this study was to compare the marginal fit of zirconia FPDs made using two CAD/CAM systems with that of metal-ceramic FPDs. MATERIALS AND METHODS. Artificial resin maxillary central and lateral incisors were prepared for 3-unit FPDs and fixed in yellow stone. This model was duplicated to epoxy resin die. On the resin die, 15 three-unit FPDs were fabricated per group (45 in total): Group A, zirconia 3-unit FPDs made with the Everest system; Group B, zirconia 3-unit FPDs made with the Lava system; and Group C, metal-ceramic 3-unit FPDs. They were cemented to resin dies with resin cement. After removal of pontic, each retainer was separated and observed under a microscope (Presize 440C). Marginal gaps of experimental groups were analyzed using one-way ANOVA and Duncan test. RESULTS. Mean marginal gaps of 3-unit FPDs were $60.46{\mu}m$ for the Everest group, $78.71{\mu}m$ for the Lava group, and $81.32{\mu}m$ for the metal-ceramic group. The Everest group demonstrated significantly smaller marginal gap than the Lava and the metal-ceramic groups (P<.05). The marginal gap did not significantly differ between the Lava and the metal-ceramic groups (P>.05). CONCLUSION. The marginal gaps of anterior 3-unit zirconia FPD differed according to CAD/CAM systems, but still fell within clinically acceptable ranges compared with conventional metal-ceramic restoration.

• 대한치과기공학회지
• /
• 제40권3호
• /
• pp.125-131
• /
• 2018

Purpose: Automatic dental prosthesis manufacturing process was accelerated by the spread of dental CAD / CAM system. The CAD / CAM system with milling alloys were needed supplement. So, sintered alloy blocks were introduced. In this study, we want to study sintered alloy block. And to evaluate the alloy block manufacture and alloy properties. Methods: The alloy powders were prepared by high pressure water dispersion method. The sintered alloy blocks were prepared by low temperature pressing method. Their components observation were EDX, and the alloy structure was observed by XRD. Results: Co-Cr alloy powders were observed to have a circle shape with an average diameter of about $100{\mu}m$ and a Ni-Cr alloy powder had a circle shape with an average diameter of about $50{\mu}m$. The Co-Cr alloy block is composed of Co (34.62 wt%), Cr (17.33 wt%), Mo (2.98 wt%), Si (0.36 wt%) and C (44.17 wt%). The Ni-Cr alloy powder was composed of Ni (40.29 wt%), Cr (19.37 wt%), Mo (3.53 wt%), Si (0.52 wt%) and C (33.18 wt%). The peak of the Co and CoCr peaks were observed in the CoCr alloy body by the means of XRD study. Cr2Ni3 of the peak was observed in the Ni-Cr alloy material. Conclusion : As a result, the following conclusions were obtained. 1. Prepared by high-pressure water-law Co-Cr alloy powder has an average diameter $100{\mu}m$, Ni-Cr alloy powder was found to have the form of sphere having an average diameter $50{\mu}m$. 2. Co-Cr alloy and Ni-Cr alloy block produced by low-temperature processing showed a certain ratio. 3. In the XRD study, Co phase appeared in Co-Cr alloy block after sintering. and Cr2Ni3 phase appeared in Ni-Cr alloy block after sintering.

• 한국정보처리학회논문지
• /
• 제1권4호
• /
• pp.517-530
• /
• 1994

본 논문에서는 연구용 VHDL 및 CAD 툴을 사용하여 톱다운 설계방식에 의하여 소 형 마이크로프로세서(MPU;microprocessor unit)의 설계를 수행한다. 이를 위하여 기본 MPU와 이의 파이프라인화 구조를 제안한다. 설계목표와 명령어, 아키텍쳐가 결정되면, 이를 우선 C 언어로 모의실험하여 동작을 확인하며, 다음 VHDL 모의실험의 경우, 주어 진 입력에 대하여 내부 레지스터의 내용을 점검하여 동작을 확인한다. 다음에, 이를 연구용 CAD 툴에 의해 완전주문형(full-custom)/반주문형(semi-custom) 설계방식에 의해 레이아웃을 수행하며 관련 모의 실험을 수행한다. 이어 성능개선을 위하여 제안 한 파이프라인 구조를 모의실험을 통하여 타당성을 확인하며 아울러 관련 문제점 및 향후 연구방향에 관해 논한다. 결론적으로, 본 논문을 통하여 MPU의 설계방법을 정립 하였으며, 아울러 성능개선을 위한 아키텍쳐의 설계변화가 가능하였다.

• ETRI Journal
• /
• 제24권2호
• /
• pp.161-171
• /
• 2002

This paper proposes a novel decision feedback differential phase detection (DF-DPD) for M-ary DPSK. A conventional differential phase detection method for M-ary Differential Phase Shift Keying (DPSK) can simplify the receiver architecture. However, it possesses a poorer bit error rate (BER) performance than coherent detection because of the prior noisy phase sample. Multiple-symbol differential detection methods, such as maximum likelihood differential phase detection, Viterbi-DPD, and DF-DPD using L-1 previous detected symbols, have attempted to improve BER performance. As the detection length, L, increases, the BER performance of the DF-DPD improves but the complexity of the architecture increases dramatically. This paper proposes a simplified DF-DPD architecture replacing the conventional delay and additional architecture with an accumulator. The proposed architecture also improves BER performance by minimizing the current differential phase noise through the accumulation of previous differential phase noise samples. The simulation results show that the BER performance of the proposed architecture approaches that of a coherent detection with differential decoding.

• 한국산학기술학회논문지
• /
• 제21권2호
• /
• pp.58-65
• /
• 2020

3D CAD 시스템으로 설계된 해양플랜트 배관재 모델들은 2D 배관 제작도와 설치도의 형태로 생산 공정에 제공되고, 기본 엔지니어링 정보와 함께 통합 공정관리시스템에서 원자재의 구매, 조달, 제작, 설치 및 검사가 체계적으로 관리되어 진행된다. 기존의 통합 공정관리시스템은 자원의 흐름 및 진행 상황을 체계적으로 관리하여 공정 시수 절감에 많은 기여를 하고 있지만, 3D 설계 형상 모델 정보를 포함하고 있지 않기 때문에 배관 설치 작업 전에 복잡한 배관 구조를 파악하거나, 잦은 설계 변경으로 인해 연관된 도면을 찾을 때 상호간 신속한 정보 교류가 어려운 단점을 가지고 있었다. 이러한 문제점을 해결하기 위해 3D 모델을 기반으로 하는 해양플랜트 배관 공정 모니터링 시스템을 개발하였다. 본 시스템은 3D 모델 기반 배관 모니터링 시스템은 Visual Studio 2017 C#과 UNITY3D를 기반으로 배관 공정 작업 정보가 3D CAD 모델과 실시간 연동될 수 있도록 구성하였다. 그리고 블록, 크기, 재료에 따른 배관 설치 공정 진행 흐름 뿐만 아니라, 청소, 수압검사, 공압검사 등 기능 검사 항목별 진행 흐름을 3D 모델상에서 실시간으로 확인할 수 있도록 하였다. 작업자는 개발된 시스템을 통해 생산 현장에서 실시간으로 배관 공정 진행 흐름을 포함한 3D CAD 모델을 쉽게 파악함으로써 작업 효율성 향상에 많은 기여를 할 것으로 기대된다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.230-238
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64) and tool kit on the ESPRIT. Transference of data among AutoCAD, I-DEAS Master Series Drafting, and ESPRIT is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of six modules, which are input and shape treatment, production feasibility check, strip-layout, die-layout, modelling, and post-processor modules. The system can design process planning and Die design considering several factors and generate NC data automatically according to drawings of die-layout module. As forming process of high precision product and die design system using 2-D geometry recognition are integrated with technology of process planning, die design, and CAE analysis, standardization of die part in die design and process planning of high pression product for semiconductor lead frame is possible to set. Results carried out in each module will provide efficiencies to the designer and the manufacturer of lead frame, semiconductor.